261
FOUR
STROKE
INTAKE
SYSTEMS
ENGINE/
GASKETS
EXHAUST
DRIVE LINE
HANDLING
ELECTRICAL
WATERLINE
/BILGE
STEERING
& CONTROLS
BODY
ACC
E
SSO
RIE
S
ACCESSORIES
SERVICE TOOLS
/HARDWARE
CHEMICAL
BULLETT RACING • MACC RACING KAWASAKI SXR 110
Bullett Racing has been involved in the Personal Watercraft industry for almost 20 years from developing Carbon Fiber Hulls for racing and running Factory
Race teams for both Yamaha and Sea Doo. Bullett has also promoted racing and was very successful in Region 1 as a promoter in that region. For many
years almost every World Champion R/A racer had a handling component on their boat that was manufactured by Bullett Racing. Bullett Racing is now back
in the Industry with it's introduction of the New Macc Racing Edition Stand-Up Hull. Bullett has always been an innovator in the Personal Watercraft industry,
Danny Gewecke is our lead designer and has over 40 some years in the marine industry from all sorts of race boats and the latest being the Personal
Watercraft industry which we have been apart of for almost 20 years. With Danny’s experience in the Personal Watercraft Arena he has almost single hand-
edly out performed any of the other Personal Watercraft hull manufactures and has been contracted numerous times by Sea Doo, Yamaha, and Kawasaki over
the years to help develop hulls and components for their boats.
BULLETT RACING GEN 1 HULL
“Bullett” has used all three decades of knowledge & design skills to revolu-
tionize the Kawasaki 800 SXR hull. “Bullett” has developed a blue printed,
trued hull that is stronger than an OEM Kawasaki hull.
Bullett Gen 1 hulls feature:
• 70lbs lighter than the stock OEM Kawasaki hull
• No customer engineering necessary
• The hull comes Gel Coated for a strong durable finish
• Dual cooling standard
• Trim cable tube installed
• 2 1/2” High Flow Rear Exhaust
• Hulls are supplied with a fitted lightweight hood and Bullet ride plate
• Handlepole, gas filler, hood latch, motor mounts, fuel tank and water box
mounts are pre-drilled for easy installation and assembly
• Macc Racing sponsons built in providing more interior space for triple pipes
• Built in rail caps
• Blue printed and trued hull for superior handling
• Hull will accept Kawasaki 750, 800, 900 & 1100 engines
Description Part No.
Bullett Racing Kawasaki Gen 1 Hull HULL-KV1
BULLETT RACING GEN 2 HULL
The Bullett Racing Gen 1 hull offers all of the standard features of the
Generation #1 hull listed above and has the following upgrade design and
features:
• Lean in style that creates faster corner speeds and better hook up
• Bullett intake shoe and Bullett intake grate to allow for a larger water intake
design that will reduce speed loss in rough water conditions
The Gen 2 hull was used by Chris MacClugage of Macc Racing at the
2010 World Finals where he was the fastest qualifier and the Moto 2 winner.
He also was the winner of Moto’s 3 & 4 of the prestigious 2010 Kings Cup
in Thailand.
Description Part No.
Bullett Racing Kawasaki Gen 2 Hull HULL-KV2
BULLETT
RACING
LIGHTWEIGHT
SXR HOOD
Bullet’s lightweight SXR
hood is extremely strong
and very durable all while
coming in 12lbs lighter
than a OEM Kawasaki
SXR hood. The hood is
predrilled for installation
of the OEM hardware and utilizes the OEM hood seal. Feature additional
clearance for installation of a Factory pipe. Gloss gel coated finish.
Description Part No.
Bullett Racing Lightweight SXR Hood HOOD-KB
BULLETT
RACING
CARBON FIBER
RIDE PLATE
Bullet’s ride plate will
improve overall speed &
handling of your water-
craft making your riding
experience the best pos-
sible. Carbon com-
pressed molded to retain
the plate will retain its shape and design and not bend like aluminum ride
plates. Improves lean angle, straight line tracking and overall grip
Description Part No.
Bullett Racing 800 SXR Carbon Fiber Ride Plate RP-KAW
262
INTAKE
SYSTEMS
FOUR
STROKE
ENGINE/
GASKETS
EXHAUSTDRIVE LINE
HANDLING
ELECTRICALWATERLINE
/BILGE
STEERING
& CONTROLS
BODY
ACC
E
SSO
RIE
S
ACCESSORIES
SERVICE TOOLS
/HARDWARE
CHEMICAL
BULLETT RACING • MACC RACING KAWASAKI SXR 110
MACC RACING 1100 SXR IGNITION
Macc Racing has developed this system for the Kawasaki 110 engine in
conjunction with the Bullett Racing hull. The ignition system features a OEM
Kawasaki Ultra 150 E-Box to prevent any water intrusion. The system utilizes
Ultra 150 coils in conjunction with a Advent ignition featuring Macc Racing
programming. The relay is mounted outside of the E-box on the gas tank for
fast and easy access if needed.
For complete details, technical specifications and pricing please contact
Macc Racing
Phone: 928- 453-2291
Email: [email protected]
or visit
wwwwww..MMaaccccRRaacciinngg..ccoomm
HOT PRODUCTS RACING
FUEL PICKUP FOR
1100 SXR/ZXI/STX-R
Provides maximum fuel flow to triple
carbs applications. Used by the top Professional Racers for conversion
Race Ski applications.
Description Part No.
Kawasaki Triple Carb Fuel Pick Up 53-9957
ADA KAWASAKI 1100 BILLET HEAD
Kawasaki 1100 Part No.
ADA 1100 Non-Girdle Billet Head Shell K900/1100
ADA K1100 22cc Dome (215 lbs. - 112 Octane) KA1222
ADA K1100 24cc Dome (200 lbs. - 108 Octane) KA1224
ADA K1100 26cc Dome (185 lbs. - 105 Octane) KA1226
ADA K1100 28cc Dome (170 lbs. - 95 Octane) KA1228
ADA K1100 30cc Dome (155 lbs. - 91 Octane) KA1230
ADA K1100 32cc Dome (145 lbs. - 89 Octane) KA1232
ADA K1100 O-Ring Kit ORKITK1100
***All ADA Domes are sold individually
