“SUPERTURBO”
AIRCLEANINGSYSTEM
V
ar
iable
spe
e
d
c
o
n
v
e
y
o
r
be
lt
GENERAL “T” FENCE SYSTEM
Made in Canada
Model 50-220 M1
$979.00
Reg. $1215.00
10”TILTINGARBORSAW- left tilt
• Aluminum fence system # SF36T30
(
MODEL 50-220 M1)
.
• GENERAL “T” fence system # F36T28
(
MODEL 50-220C M1)
.
• GENERAL “T” fence system # F36T52
(MODEL 50-220CL M1 - $1095.
0
0
- not shown).
• 44” x 27” cast-iron table with
extension wings.
• Solid one-piece yoke.
• Large stop switch.
• Dual direct dust collection includes
built-in blade shroud connected to a
standard 4” dust outlet.
• Powerful 2 HP motor.
DIGITALBLADE
ANGLEDISPLAY
WE RESERVE THE RIGHT TO CORRECT ANY TYPOGRAPHICAL AND PICTORIAL ERRORS
WITHOUT NOTICE.
Distributed by
*Prices in effect until
May 31
st
2008
Model 50-220C M1
$1050.00
Reg. $1440.00
Model 15-250 M1
$1859.00
Reg. $2520.00
24”HORIZONTALDOUBLE
DRUMSANDER
• Two 5” diameter aluminum drums.
• High quality conveyor belt for long
service life.
• Magnetic safety switch.
• 3 to 20 FPM variable feeding speed
(conveyor belt).
• Powerful 3 HP main motor.
Model 10-600 M1
$459.00
• Air movement (3 speeds)
700, 900, 1250 CFM.
• Timer settings 2, 4, 6,
8 hrs & continuous.
• Powerful 1/3 HP motor.
2008
*
2
THREESAWSIN
ONE!
COMPACT&VERSATILE
DESIGN.CANBEUSEDAS
AREGULARSAW,BUT
INCLUDESABUILTINSLID-
INGTABLEFORSTABLE
EFFORTLESSCROSSCUTS&
ASEPARATESCORINGBLADE
FORCHIPFREECUTSIN
MELAMINE&LAMINATES.
POWERFUL
3HPMOTOR
SEE-THROUGHBLADE
GUARDWITHSPLITTER
ANDANTI-KICKBACK
PAWLS
DUSTCOLLECTIONFROM
CABINETANDBLADE
10”TILTINGARBORSAW
MODEL 50-250K M1 - right tilt
MODEL 50-260K M1 - left tilt
• 3 matching V-belts.
• Hi-precision professional quality rip
fence system #F42T50.
• Magnetic safety switch.
• Powerful 3 HP motor.
MELAMINE
EXTENSIONTABLE
WITHLEGSINCLUDED
NEW
$178.00
$59.00
UNIVERSALMOBILEBASE
I
TEM #50-025
Heavy-duty steel. Strong 3” wheels.
Rubber levelling feet (2). Adjustment
in 1” increments. 500 LBS capacity.
H
EAVY-DUTYMOBILEBASEFORTABLESAWS
WITHEXTENSIONTABLE&LEGS
ITEM #50-030
Heavy-duty steel. Strong 4” wheels.
900 Lbs capacity.
FLEXIBLE,EXPANDIBLE2-WAYROLLERSTAND
ITEM #50-167S
Adjustable height from 24 1/4” to 37”.
9 Nickel-plated 2 1/4” x 20” 2-way
rollers. 51 1/2” maximum expanded
length. Load capacity of 300 LBS per
set.
$109.00
TENONINGJIGFORTABLESAW
ITEM #50-050
Perfect fit on right or left tilt table
saws. Heavy-duty cast-iron construc-
tion. Large handles for better opera-
tor control.
10”TILTINGARBORSAW
MODEL 350-T50-M2M - right tilt
MODEL 650-T50-M2M - left tilt
• 2 matching V-belts.
• “T” fence system with 50” rails.
• Magnetic safety switch.
• 36” extension table with adjustable
steel support legs.
• Powerful 3 HP motor.
Model 350-T50-M2M
/
650-T50-M2M
$2649.00
Reg. $3658.05
Made in
C
anada
Model 50-250K M1
/50-260K M1
$1699.00
Reg. $2150.00
GENERAL “T” FENCE SYSTEM
M
ade in Canada
GENERAL “T” FENCE SYSTEM
Made in Canada
GENERAL “T” FENCE SYSTEM
Made in Canada
14”INDUSTRIALTILTING
ARBORSAW
MODEL 550-T50-M57- right tilt
• High-quality reinforced steel cabinet.
• 3 matching V-belts.
• Heavy-duty, precise rip fence
system #F48T50.
• Magnetic safety switch.
• Powerful 7 1/2 HP motor.
Model 550-T50-M57
$9999.00
Reg. $12 897.50
Made in
Canada
10”SCORINGSAWWITH
BUILT-INSLIDINGTABLE
MODEL 50-560 M1
• Separate safety lock out switch
for scoring motor – can be turned
off when cutting solid wood.
• Powerful totally enclosed fan
cooled (TEFC) main motor and
separate 1/2 HP motor for scoring
blade.
• Heavy-duty cabinet mounted
cast-iron trunnions.
• Solid cast-iron table with anodized
aluminum coating for improved
friction free performance and
longer table life.
$4999.00
Reg. $5580.00
$249.00
3
24”DOVETAILFIXTURE
ITEM 40-020
• Male and female dovetail joints are cut
simultaneously.
• Side stops provided.
• 1/2” Half-blind template included
(Item #40-022).
$179.00
Reg. $224.00
12”DOVETAILFIXTURE
ITEM 40-010
• Handles stock up to 12" wide and from
5/16" to 1 1/4" thick.
• Put the stock in position and pull the
handle to lock it into place.
• 1/2” Half-blind template included
(Item #40-016).
$69.00
Reg. $89.00
POWERFEEDER
MODEL 20-220
• 3 rollers.
• 4 speeds; 9.5, 15, 25, 38 FPM
• Powerful 1/2 HP motor.
$849.00
Reg. $990.00
POWERFEEDER
MODEL 20-100
• Fully adjustable - fits on a variety of
machines.
• Variable speeds 6.5 to 40 FPM in
forward or reverse.
• Powerful 1/8 HP motor.
$299.00
Reg. $380.00
BELTSANDER/GRINDER
M
ODEL 15-232
•
Double sealed ball-bearing construction.
• Adjustable aluminum tool-rest.
•
3450 RPM grinding speed.
• 4900 FPM belt speed.
• Powerful 1/3 HP motor.
$149.00
Reg. $200.00
EDGEBANDER
I
TEM 45-100
•
Electronically controlled heat element
v
ariable heat from 100 to 200° C.
•
Accommodates a wide range of edge
b
anding material up to 2” thick.
• Built-in cut-off knife with palm-strike
knob.
• 26 3/4” x 7 1/2” laminate covered table
supports large workpieces.
PNEUMATICMOBILEBASE
•
Move heavy objects on a
c
ushion of air.
•
Requires standard compressed air
a
nd a smooth hard floor.
• Customizable - can be cut to fit
almost any size exactly.
•
Safer than wheels - no tipping and
z
ero rollback.
SLIDINGTABLE
• Easy to install sliding table
system for table saws and
shapers, ensures quick and
precise cuts with large
panels.
• Fits most 10" to 14" table
saws and most shapers.
“OSBORNE”MITERGAUGE
• Solid triangular design for tight
miter joints.
• Sliding flip-up stop.
• Easy to read index graduations.
• Patented extension arm
assembly makes it quick &
easy to find any angle and
lock it securely in place.
M
odel Ex-21
$749.00
Reg. $849.00
H
e
adtilts4
5
°
le
ft&
r
igh
t
21”SCROLLSAW
• Head tilts 45° left and right, tilting the blade,
not the table keeping the workpiece level.
• 21” throat capacity & 2” thickness capacity.
• Variable speed of 400 to 1550 STROKES/MIN.
Item 50-EB3
$109.00
R
eg. $135.00
Item 50-SLT40
$600.00
Reg. $779.95
Item 50-SLT60
$800.00
Reg. $899.98
OVERARMBLADECOVER
SYSTEMWITHDUSTCOLLECTION
CAPABILITY
ITEM 50-EXBC10 - 10”
(fits on most 10” saws)
ITEM 50-EXBC14 - 14”
(fits on most 12” & 14” saws)
• 4” main boom and 3”
inner boom. Flexible 3”
hose connects the blade
cover to the boom.
Item 50-EXBC10
$379.00
Reg. $439.95
Item 50-EXBC14
$479.00
Reg. $560.00
Un
i
qued
esi
gn
mountingbracket:
pi
votsarm
away
or
remove
compl
etel
y
i
n
s
econ
d
s
Item 10-824(18” x 24”)
$189.00
Reg. $210.00
I
tem 10-929 (29” x 29”)
$279.00
Reg. $300.00
$349.00
Reg. $399.00
4
V
ariable
reversible
speed
Made in
Canada
20”WOODLATHE
• Extra heavy-duty, cast-iron
headstock, tailstock, and bed.
• 24 1/2” swing over gap capacity.
• 375 to 3300 RPM variable speed.
• 38” distance between centers.
• Magnetic safety switch.
• Powerful 2 HP motor.
Model 26020-1-M2
$4599.00
Reg. $5984.00
WOODLATHEDUPLICATOR
I
TEM 25-036
Creates perfectly matched spindles
with ease. Extruded aluminum base
and carriage. Smooth hand wheel
controlled rack & pinion system. High
speed steel cutter.
F
I
T
SMO
S
T
1
2”
-
22”
F
L
O
O
R
M
O
DE
L
L
A
T
H
E
SW
I
T
H
CA
S
T
B
E
DW
A
Y
S
4”-4JAWSCROLLCHUCK
I
TEM 25-105: (1” - 8)
F
or 25-100, 25-200, 160 & 16018
I
TEM 25-605: (1 1/4” - 8)
For 25-600, 25-650, 260 & 26020
$74.00
$429.00
V
ariable
speed
Made in
Canada
18”WOODLATHE
• Extra heavy-duty, cast-iron headstock, tailstock, and bed.
• 21” swing over gap capacity.
• 500 to 3000 RPM variable speed.
• 38” distance between centers.
• Powerful 1 HP motor.
Model 16018-2-M1
$2799.00
Reg. $2849.00
D
igitalin
v
e
r
te
r
e
le
c
tr
o
n
ic
v
ar
iable
spe
e
d
14”X30”WOODLATHE
• Heavy-duty cast-iron bed
for stability and minimal
vibration.
• Headstock pivots 360° with
positive stops at 45° ,90°
and 180° for multi-position
outboard turning.
• Electronic inverter for 2 variable
speed ranges: 80 to 1600 &
150 to 3750 RPM.
• Powerful 1 HP motor.
NEW
M
odel 25-300
$1399.00
Reg. $1890.00
Electronic
variablespeed&
pivotinghead
16”X42”WOODLATHE
• Heavy-duty cast-iron bed for minimal vibration.
• Headstock swivels 360° with 45° and 90° positive stops.
• Electronic inverter for variable speed adjustment (0- 3750 RPM).
• Powerful 1 1/2 HP motor.
Model 25-650 M1
$1799.00
Reg. $2400.00
Model 25-200 M1
$549.00
Reg. $810.00
VARIABLESPEEDMAXI-LATHEVS+
• Quick lock control levers easily
position tool-rest.
• Maximum distance of 17 5/16”
between centers.
• 3 variable speed ranges:
300-900, 600-1800 &
1200-3600 RPM.
• Powerful 3/4 HP motor.
INCLUDESONE
1
10V-15AMP
SOCKET
INCLUDES
FLOOR-MOUNT
B
OLT-DOWNBRACKET
(Fasteners not included)
5
80-150L
80-100L
11/4”HEAVY-DUTY
PRODUCTIONSHAPER
• Heavily ribbed, solid cast-iron table.
• 5 speeds with reverse.
• 2 emergency stop buttons.
• Magnetic switch with thermal
overload protection.
• 5 HP motor (M1) &
7 1/2 HP motor (M2, M3).
3/4”SPINDLEWOODSHAPER
• 1/4” & 1/2” router bit adapters included.
• Two spindle speeds
(8000 & 10,000 RPM) with reverse.
• Magnetic starter with thermal
overload protection.
• Powerful 3 HP motor.
E
x
tr
alo
n
g
5
51/4
”
table
s
4
v
ar
iable
/r
e
v
e
r
sible
spe
e
dswith
e
le
c
tr
o
n
ic
c
o
n
tr
o
l
Model 80-100L & 80-150L M1
$649.00
Reg. $890.00
Made in
Canada
20”WOODLATHE
• Extra heavy-duty, cast-iron
headstock, tailstock, and bed.
• 24 1/2” swing over gap
capacity.
• 4 variable speeds
(0 to 3000 RPM).
• Quick release speed
changing lever.
• 38” distance between centers.
• Magnetic safety switch.
• Powerful 2 HP motor.
Model 26020VDR-M2
$4659.00
R
eg. $6088.50
6”DELUXEJOINTER
• Large surface, ground cast-iron tables.
• Large, heavy-duty, center-mounted cast-iron
fence with 90° and 45° positive stops.
• Independent in-feed and out-feed table
adjustment hand wheels (80-100L only).
• Quick lever table adjustment (80-150L only).
• Jackscrew system for quick, easy knife
adjustment.
• Powerful 1 HP motor.
Model 80-200L M1
$1499.00
Reg. $1860.00
8”DELUXEJOINTER
• Large surface, ground cast-iron tables.
• Heavy-duty, three-knife cutter head for clean,
fast, superior finish cuts.
• Independent in-feed and out-feed table
adjustment hand wheels. Built-in rabbeting
ledge.
• Magnetic switch for added safety.
• Powerful 2 HP motor.
Model 80-200LHC M1
$2290.00
Reg. $2800.00
8”HELICALCUTTERHEAD
4ROWS,TOTAL:22INSERTS
Model 40-250 M1
$1299.00
Reg. $1900.00
Model 40-450
M1, M2, M3
$3990.00
M1 Reg. $5055.00
M2, M3 Reg. $5245.00
ROUTERTABLE
• Independently adjustable left and
right fences.
• Includes 12” x 9” router insert plate,
starting pin, and 2 removable insert
rings (permitting 3 different diame-
ters: 1 1/4”, 2 5/8” & 3 7/8”).
• Movable switch with outlet for
convenient.
Model 40-040
$369.00
Reg. $445.00
14”RADIALARMSAW
• High-quality steel base.
• Positive stop at 0°, 45° and 90°
for tilt & pivot.
• Rod and blade protectors with
anti-kickback fingers.
• Powerful 3 1/2 HP motor.
Model V-154-M2
$8590.00
Reg. $9773.50
Made in
Canada
Made in
Canada
E
xtralon
g
74
”tables
8”DELUXEJOINTER
• Heavy-duty cast-iron table.
• 38” heavy-duty fence system.
• Cutter head mounted on two sealed permanently
lubricated bearings.
• Magnetic safety switch.
• Powerful 1 1/2 HP motor.
Model 480-1-M2
$3299.00
Reg. $4400.00
* #10-310
* #10-314
* #10-323
#10300-35B
#
10300-11B
* #10-332
* #10-334
*
#10-306
* #10-309
6
*ALSO SOLD
SEPARATELY
I
NCLUDED
ACCESSORIES
Model 15-020 M1
$1099.00
Reg. $1575.00
OSCILLATINGSPINDLESANDER
• Heavy-duty cast-iron table and base.
• Heavy-duty oil bath gearbox.
• 75 oscillations per minute.
• 1725 RPM spindle speed.
• 10 interchangeable spindles from 1/4” to 4”
including 1/4”, 3/8”, 1/2”, 5/8”, 3/4”, 1”, 1 1/2”,
2”, 3” & 4”.
• Powerful 1 HP motor.
Model 15-220 M1
$379.00
Reg. $445.50
OSCILLATINGSPINDLESANDER
• Rotating & oscillating effect ensures
exceptional finishing results.
•
Precision ground cast-iron tilting table.
•
5 interchangeable spindle assemblies: 1/4", 1/2",
5/8", 1 1/2", 2" dia. with 100 grit sandpaper.
•
1720 RPM spindle speed.
•
Powerful 1/2 HP motor.
24”HORIZONTALDRUMSANDER
• Steel frame and heavy-duty base.
• High quality variable speed conveyor belt.
• 3-20 FPM variable feed speed.
• Magnetic safety switch.
• Conveyor belt equipped with removable key
safety switch.
• Powerful 2 HP main motor.
6”X48”BELT&12”DISCSANDER
• Heavy-duty enclosed cabinet base protects
motor from sanding dust.
• 2250 LIN. FPM belt speed.
• Built-in dust collector.
• Powerful 1 1/2 HP motor.
I
m
pr
o
v
e
dbe
lt
tr
ac
k
in
gsy
ste
m
H
e
av
y
ste
e
l
base
fo
r
be
tte
r
stabilit
y
6”X108”VERTICALEDGEBELTSANDER
• Front table tilts left or right.
• Graphite backing reduces belt friction for longer belt life.
• Dynamically balanced 7’’ rubber drive roller and crowned
3’’ idler roller to ensure solid belt tracking.
• Oscillating feature (15-010S M1 only).
• Powerful 2 HP motor.
Model 15-010S M1
$1769.00
Reg. $2250.00
M
odel 15-010 M1
$1499.00
R
eg. $1950.00
Model 15-005 M1
$849.00
Reg. $1095.00
6”X89”EDGEBELTSANDER
• Sanding belt operates at any angle from horizontal to vertical.
• Graphite covered steel plate for reduced friction and extended
belt life.
• Oscillating feature (
15-005S M1 only)
.
• Powerful 1 1/2 HP motor.
M
odel 15-005S M1
$939.00
R
eg. $1185.00
M
odel 15-035DC M1
$999.00
Reg. $1240.00
M
odel 15-150 M1
$1499.00
Reg. $1980.00
V
ar
iable
spe
e
d
c
o
n
v
e
y
o
r
be
lt
Ben
ch
-top
model
TILTINGTABLE
Heavy-du
t
y
basewithb
u
ilt-in
storagearea
WET/DRYVACUUMCLEANER
• 10 gallon capacity.
• 2 speed 1 1/2 HP motor.
• Rated for heavy-duty maintenance &
janitorial use.
• 2 stage air filtration.
Stain
le
ss
ste
e
ltan
k
Model 10-300 M1
$259.00
R
eg. $320.00
Made in
Canada
14”SINGLESURFACEPLANER
• Cutter head mounted on 2 sealed
permanently lubricated bearings.
• 15 FPM feed speed (75 cuts per inch).
• 2 matching V-belts.
• Powerful 3 HP motor.
Model 130-1-M2
$4899.00
Reg. $5632.00
7
15”SINGLESURFACEPLANER
• 2 feed speeds - 16 & 20 FPM.
• Magnetic safety switch.
• Triple V-belt drive for greater power.
• The head of the machine is
equipped with anti-kickback fingers.
• Built-in wheels.
• Powerful 3 HP motor.
Model 30-125CE M1
$1599.00
Reg. $2485.00
Model 30-125CEHC M1
$2499.00
Reg. $3000.00
AVAILABLE
ON30-125CEHCM1
15” HELICAL
CUTTER HEAD
4 rows, total: 44 inserts
Large
cast-iron
exten
sion
win
gs
AVAILABLE
ON30-115HCM1
15” HELICAL
CUTTER HEAD
4 rows, total: 44 inserts
1
5”WOODCUTTINGBANDSAW
• One-piece molded cast-iron frame.
• Dynamically balanced heavy cast-iron
wheels.
• Graduated indicator for blade tension.
• Powerful 1 HP
motor.
15”WOODCUTTING
BANDSAW
• Cast-iron frame.
• Dynamical balanced
heavy cast-iron wheels.
• Very silent, vibration
free operation.
• Graduated indicator for
blade tension.
• Powerful 1 1/2 HP
industrial motor.
17”WOODCUTTING
BANDSAW
• Solid, high quality,
precision-machined,
ribbed cast-iron table.
• Laser line marker.
• 2 blade speeds -
1560 & 3190 FPM.
• Wide blade selection
(1/8”-1”).
• Powerful 2 HP
industrial motor.
Model 90-240 M1
$1399.00
Reg. $1890.00
Model 90-150 M1
$799.00
Reg. $1230.00
I
TEM 590-1
$4299.00
Model 490-1-M1
$3099.00
Reg. $3547.50
3
/8”
blade
in
c
lu
de
d
O
PTIONALRISER
A
TTACHMENTKIT
I
TEM 90-130
$69.00
1
4”WOODCUTTINGBANDSAW
• Cast-iron frame & precision-balanced
aluminum wheels with replaceable
rubber tires.
• Rip fence & miter gauge included.
• 2 speeds (1800 & 3000 LIN.FPM).
• Blower device.
• Powerful 1 HP motor.
3
/8”
blade
in
c
lu
de
d
14”WOODCUTTING
BANDSAW
• Built-in dust collection
system.
• Laser line marker &
work light included.
• Precision aluminum
miter gauge.
• 8” super cutting
capacity.
• 2 blade speeds -
2959 & 2315 FPM.
• Powerful 1 HP motor.
Model 90-125 M1
$649.00
R
eg. $835.00
A
VAILABLE:
1
5”METALCUTTING
B
ANDSAW
Same features as model
490-1-M1. 8 Blade speeds
(40 to 3250 Lin. FPM).
Heavy-duty cast-iron
gearbox.
Made in
C
anada
Made in
Canada
Model 690-1-M2
$3199.00
Reg. $3767.50
12”resaw
capacit
y
1/2”blade
in
clu
ded
3
/8”blade
in
clu
ded
15”SINGLESURFACEPLANER
• 2 feed speeds - 16 & 20 FPM.
• Magnetic safety switch.
• Heavy-duty cast-iron frame reduces
vibration for more precise planing.
• The head of the machine is
equipped with anti-kickback fingers.
• Powerful 3 HP motor.
Large
cast-iron
exten
sion
win
gs
Model 30-115 M1
$1249.00
Reg. $1530.00
Model 30-115HC M1
$2199.00
Reg. $2600.00
20”SINGLESURFACEPLANER
• 2 feed speeds - 22 & 28 FPM.
• Magnetic safety switch.
• Built-in table rollers reduce friction.
• Positive gear design for quick and
accurate table adjustments.
• Powerful 7 1/2 HP motor.
Model 30-360 M1
$3790.00
Reg. $5175.00
Model 30-360HC M1
$5950.00
Reg. $8035.00
AVAILABLE
ON30-360HCM1
20” HELICAL
CUTTER HEAD
4 rows,
total: 58 inserts
Large
cast-iron
extension
wings
AVAILABLE
ON30-300HCM1
20” HELICAL
CUTTER HEAD
4 rows, total: 58 inserts
20”SINGLESURFACEPLANER
• 2 feed speeds - 16 & 20 FPM.
• Magnetic safety switch.
• Cast-iron base, table, and head.
• Built-in mobile base with one-step
lock-pedal.
Large
cast-iron
extension
wings
Model 30-300 M1
3 HP motor
$2495.00
Reg. $3105.00
Model 30-300HC M1
5 HP motor
$2999.00
Reg. $4275.00
10-110CF M1
10-105CF M1
*
*
10-210CF M1
TWO-MACHINE
HOOK-UPKIT
•(10) 4” wire bail hose
clamps
• (1) 4” universal dust
hood outlet
• (2) 4” x 10’ polyethylene
flexible hose
• (6) Heavy-duty clear
plastic collector bags
• (1) Table saw dust hood
• (2) 4” blast gates
• (1) 4” Y fitting
ITEM 10-200
$89.90
SINGLEMACHINE
HOOK-UPKIT
• (2) 4” wire bail hose
clamps
• (1) 4” universal dust
hood outlet
• (1) 4” x 10’ polyethylene
flexible hose
• (3) Heavy-duty clear
plastic collector bags
MODEL 10-210 M1
2 micron bag filter
$899.00
Reg. $1145.00
MODEL 10-210CF M1
1 micron canister filter
$1099.00
Reg. $1620.00
DUSTCOLLECTOR
• 2280 CFM (air flow).
• Powerful 3 HP motor.
DUSTCOLLECTOR
• 1321 CFM (air flow).
• Powerful 2 HP motor.
MODEL 10-110CF M1
1 micron canister filter
$749.00
Reg. $880.00
MODEL 10-110 M1
2 micron bag filter
$599.00
Reg. $700.00
DUSTCOLLECTOR
• 1100 CFM
(air flow).
• Powerful
1 1/2 HP motor.
DUSTCOLLECTOR
• 647 CFM (air flow).
• Washable, extra fine
2 micron filter bag.
• Powerful 1 HP motor.
$1690.00
Reg. $2299.00
$289.00
Reg. $330.00
$499.00
Reg. $600.00
14”DRILLPRESS
MODEL 75-150 M1
WITH REG. 5/8” CHUCK
• Rotating, 45° tilting, crank-
operated worktable with
quick release clamp.
• Safety switch & adjustable
spindle tension return
spring.
• 12 spindle speeds
(
280 - 3000 RPM).
• Industrial 1/2 HP motor.
Mortiser sold
separately
Top opening measures
9 1/4” x 12 3/4”
OPTIONAL
CLOSEDSTAND
ITEM #75-070
1”HOLLOWCHISEL
MORTISER
• Heavy-duty cast-iron
construction.
• 1/4”, 3/8”, 1/2”, & 3/4”
chisel & bit sets included.
• Lateral and longitudinal
table movement.
• Tilting head and swivel
fence.
• Powerful 1 HP motor.
5/8”HOLLOWCHISEL
MORTISER
• Tilting head with a
180° swivel.
• Heavy-duty cast-iron
construction.
• 1/4”, 5/16”, 3/8”, & 1/2”
chisel & bit sets included.
• Powerful 1/2 HP motor.
INCLUDED
INCLUDED
Model 75-050T M1
$449.00
Reg. $520.00
Model 75-075 M1
$1099.00
Reg. $1430.00
$229.00
$64.00
17”DRILLPRESS
MODEL 75-200RC M1
WITH REG. 5/8” CHUCK
• Rotating, 45° tilting, crank-
operated worktable with
quick release clamp.
• Safety switch & adjustable
spindle tension return
spring.
• 12 spindle speeds
(
340 - 2800 RPM).
• Industrial 3/4 HP motor.
15”DRILLPRESS
MODEL 34-01-M1
WITH REG. 1/2” CHUCK
WITH THREADED COLLAR
• 4 1/2” Spindle travel.
• 6 speeds
(460 to 4910 RPM).
• Head raises and lowers on
the column.
• Powerful 3/4 HP motor.
M
ade in
Canada
MODEL 10-105CF M1
1 micron canister filter
$569.00
Reg. $740.00
MODEL 10-005 M1
$269.00
Reg. $375.00
MODEL 10-105 M1
2 micron bag filter
$369.00
Reg. $514.00
ITEM 10-100
$45.00
OPTIONALOPEN
STANDUNIVERSAL
BASE
ITEM #75-045
