Type 1a
EN943-1:2015
+A1:2019
Interceptor®Plus Series
Chemical Protective Clothing
Protect Your People
™
Interceptor® Plus Brand Features
Interceptor® Plus Physical Properties Interceptor® Plus Permeation Data -ASTM F739
Protect Your People
™
Made from a high strength nonwoven with non-halogenated lms on either side.
Fabrics have better abrasion resistance, higher tensile strength and puncture resistance,
better durability.
High loft, polyester, buer/diusion layer in the center.
Specically developed for protection against toxic, corrosive gases, liquids and solid chemicals.
According to ASTM F739 test, the time of chemical permeation rate to achieve 0.1μg/cm
2
/min is
more than 480 min for most of the chemicals that have tested.
Physical Property Test Method Units Test Results Level
Basic Weight
Abrasion resistance
Flex cracking resistance
Flex cracking resistance
at -30
Tensile strength(MD/CD)
Tear resistance(MD/CD)
Puncture resistance
Resistance to ignition
Resistance to ame
EN530 method 2 No. of cycles 2000 6
EN ISO 7854 No. of exes 1000 1
EN ISO 7854 No. of exes 200 2
EN ISO 13934-1 N 630/396 4
ISO 9073-4 N 246/220 6
EN863 N 43.6 2
EN13274-4 method 3 - Pass -
N13274-4 method 3 - Pass 2
- g/cm 363 -
2
1,3-Butadiene 106-99-0 Liquid 99% >480
2,2,2-Trichloroethanol 115-20-8 Liquid 99% >480
2,3 Dichloro- 1Propene 78-88-6 Liquid 98% >480
2,4-Dichlorophenol 120-83-2 Liquid 99% >480
2,4-dichlorophenoxy Acetic Acid 94-75-7 Liquid 99% >480
4-Bromouorobenzene 460-00-4 Liquid 99% >480
Acetic Acid 64-19-7 Liquid 99% >480
Acetone 67-64-1 Liquid 99% >480
Acetonitrile 75-05-8 Liquid 99% >480
Acetyl Chloridein 75-36-5 Liquid 98% >480
Acrolein 107-02-8 Liquid 98% >480
Acrylic Acid 79-10-7 Liquid 99% >480
Acrylonitrile 107-13-1 Liquid 99% >480
Allyl Chloride 107-05-1 Liquid 99% >480
Ammonia 7664-41-7 Gas 99% >480
Ammonium Fluoride 12125-01-8 Liquid 40% >480
Bromine 7726-95-6 Liquid 99% 36
Carbon Disulde 75-15-0 Liquid 99% >480
Chlorine 7782-50-5 Gas 99% >480
Dichloromethane 75-09-2 Liquid 99% >480
Diethylamine 109-89-7 Liquid 99% >480
Dimethylformamide N,N- 68-12-2 Liquid 99% >480
Ethyl Acetate 141-78-6 Liquid 99% >480
Ethylene Oxide 75-21-8 Gas 99% >480
Hexane 110-54-3 Liquid 99% >480
Hydrouoric Acid  7664-39-3 Liquid 70% >480
Hydrogen Chloride 7647-01-0 Gas 99% >480
Hydrogen Fluoride 7664-39-3 Gas 99% >480
Methanol 67-56-1 Liquid 99% >480
Methyl Chloride 74-87-3 Gas 99% >480
Nitrobenzene 98-95-3 Liquid 99% >480
Phosphorus Pentachloride 10026-13-8 Liquid 99% >480
Sodium Hydroxide 1310-73-2 Liquid SAT. >480
Sodium Hydroxide 1310-73-2 Liquid 50% >480
Sulfuric Acid 7664-93-9 Liquid 98% >480
Sulfur Dioxide 7446-09-5 Gas 99% >480
Sulphuryl Chloride 7791-25-5 Liquid 97% >480
Tetrachloroethylene 127-18-4 Liquid 99% >480
Tetrahydrofuran 109-99-9 Liquid 99% >480
Thionyl Chloride 7719-09-7 Liquid 99% 90
Toluene 108-88-3 Liquid 99% >480
Vinyl Chloride 75-01-4 Liquid 99% >480
Challenge Chemical
CAS No.
Physical
State
Concentration
Normalized
Breakthrough Time
This next generation of Interceptor® fabric
is now compatible with the PermaSURE®
Toxicity Risk Modeller, giving you access
to the most comprehensive chemical
database in the industry.
Advantages of PermaSURE® :
Models permeation rates and provides safe-use times
by incorporating environmental, temperature and
chemical exposure factors.
State-of-the-art technology developed initially by
leading Polymer chemists for defense forces to
quickly determine which suits are needed for various
chemical warfare agents and dual use chemicals.
Based on the known molecular characteristics and
behavior of 4000+ chemicals interacting with
Interceptor Plus fabric.
Website http://www.lakeland-permasure.com/app/
Colors: Orange, Yellow, Blue
e
Type 1a
EN943-1:2015
+A1:2019
Interceptor® Plus Level A Gas-Tight
Chemical Protective Suit
Interceptor® Plus is the apex of Lakeland Industries’
chemical protective clothing line and is the ultimate
in chemical protection with the most extensive
chemical data in the industry, provide the Level A
protection of gas, vapor, aerosol, liquids, harmful
contaminants or particulate.
Rear covered one-way
exhaust valve
Fabric
Made from a high strength nonwoven
with non-halogenated lms on either
side
High loft, polyester, buer/diusion
layer in the center
Specically developed for protection
against toxic, corrosive gases, liquids
and solid chemicals
Storm flap
Front entry 122cm gas-tight
zipper with double protective
storm ap
Visor
Double layer visor system (PVC inside,
Teon outside) with unique, patented
etched sealing system for a stronger
and more secure seal
Glove
Double layer glove system (inner
polymer chemical glove / outer
butyl glove)
Attached sock with boot
overap for full seal
Generously sized
rear pouch to
accommodate most
SCBA units
One-way exhaust
valve
ICP640: Fully Encapsulated Gas-Tight Suit
ICP650: Rear Encapsulated Gas-Tight Suit
2 layer “wide-view”
faceshield.
ICP640W: Fully Encapsulated Wide-View Gas-Tight Suit
ICP650W: Rear Encapsulated Wide-View Gas-Tight Suit
Generous
l
y size
d
rear
p
ouc
h
to
a
cc
o
mm
oda
te m
o
st
SC
BA units
One-way ex
h
aust
va
l
v
e
Interceptor® Plus series products
ICP450
Level B Encapsulated Suit
Encapsulated suit (Level B), rear entry,
expanded back, 48’’ zipper, storm ap, 20
mil PVC faceshield, elastic wrists, 2 exhaust
ports with shroud, attached sock boots with
boot aps.
ICP400
Level B Flat Back
Rear entry.
Thickening PVC face shield.
With connector on waist, which can
connect all kinds of air tube.
Protection against long-time hazards.
ICP130
Coverall
Coverall, hood, elastic
face, wrists and ankles.
Front storm ap with
hook and loop closure.
ICP165
Level B Coverall
Coverall, respirator t
hood, double storm
ap with hook and
loop closure, elastic
face and wrists,
attached boots with
boot aps.
ICP155
Level B Coverall
Coverall, expanded back
for SCBA, respirator t
hood, storm ap with hook
and loop closure, elastic
face and wrists, attached
boots.
ICP491/ICP497
Level A encapsulated
training suit
Made of Interceptor® Plus
fabric, 20mil PVC face shield,
48”zipper, double storm ap,
attached boots sock, training
use only.
00220 Vapor Tight Test Kit
Maintain your encapsulated suits with
this easy to use test kit. Kit features an
easy-to-read Magnehelic pressure
gauge, digital timer, sturdy brass and
steel ttings, hoses and connectors in a
waterproof case. Complete instructions
included.
00220 Universal test kit for Lakeland,
DuPont and Kappler Level A and NFPA
Certied suits. Features an integrated
blower for suit ination.
Note Chemical protective coverall with socks which need to wear chemical boots over it.
Lakeland Asia Pacific
Unit 503, Building B, Sinolight Plaza, No.4 Wangjing Qiyang Road,
Chaoyang District, Beijing 100102, P.R. China
Tel: +86 10 64379226
Fax: +86 10 64379918
Email: [email protected]
ICP645A
Fully Encapsulated Gas-Tight Suit For Themal Protection
Outer layer is aluminized berglass which can protect against above 95% heat
emission; inner layer is level A gas-tight chemical protective coverall;
Fully encapsulated front entry gas protective suit (Level A), expanded back;
Sealed seam plus inside and out, 48”zipper, double storm ap with hook and loop
closure;
2 layers face shield (10 mil Teon /40 mil PVC);
Include the glove system, 2 exhaust valves, attached sock boots with boot aps,
15”waist belt with 3 belt loops sewn (inside) and sealed. Storage bag included.
C
h
lo
fa
a
b