seat and guide machines
40 years in business
SERDI team
Call us from 8:00am to 5:00pm Eastern Standard Time, Monday through
Friday.
For questions about technical issues, status of an order, tooling and
parts, visit our website www.serdi.com or contact us at
Remember that you can NOW order Online!
PHONE: 1-800-447-3790
FAX: (770)493-8323
www.serdi.com
2
Table of contents
Tooling for seat and guide machines 4
Tool holders 8
Original style —8
SCS / TRI —9
Spare parts —10
Special —10
Cutting bit holders 11
Original tooling —11
TRI —15
Cutting bits 18
45° —18
30° —22
37.5° —25
straight seat angles —26
performance seat angles —28
sale —34
Installation / removal of seat and guides 35
Indexable milling heads cutters 36
Brazed milling heads cutters 37
Carbide pilots 38
Machine range 40
3
Tooling for seat and guide machines
SERDI prole cutters are designed on a modern CAD system, and then produced according to exact seat specication
on a CNC prole grinder. Every single cutter is quality controlled on state-of-art equipment before delivery.
Original style
A1
Standard Cutting Bit for almost any conventional valve seat prole
AL10
AL11
AL12 AL13
Counterboring Cutting Bit
for valve seat counterbore
machining
B1
For wide seat prole machining
on large diameter valve seat
B2
For wide seat prole machining
on smaller diameter valve seat
B4
For small valve seat diameter
such as motorcycle heads with
a deep seat
New generation style
E1
E2
Standard Cutting Bits
for almost any small
valve seat prole
(E1 ts S2700 - E2 ts
S2710/S2711/S2731)
E3
Cutting bit for wide seat prole
machining
(Fits S2710/S2711/S2730)
D1
Counterboring cutting bit for small
diameter seat pocket machining
(Fits S2700)
D2
Counterboring cutting bit for valve
seat machining (Fits S2710/S2711/
S2731)
0° Rake Cutting Angle (Negative):
The bit is perpendicular to the cutting surface (as the SERDI
Original Style Tooling). The 0 ° angle tooling can cut different
hardness seats (soft & medium) up to 45 Rockwell. The cutting
parameters for the 0 ° angle tooling can remain the same as the
SERDI Original Style Tooling but with an easier cut.
8° Rake Cutting Angle (Positive):
The bit is 8° from the perpendicular to the cutting surface.
The 8 ° angle tooling is especially design to cut hard seats 45
Rockwell and up. The cutting bit is more aggressive on the seat
so the vertical pressure decrease and run at a lower Rpm. SERDI
recommends using this type of tooling only on hard seats (Risk of
vibration and shattering on soft seats).
TECHNICAL NOTES :
- Do not use a 0° bit on a 8° Bit Holder or the opposite.
- If used as above mentioned, the back of the bit will touch
the seat when machining or the bit will be too fragile in the
second case.
- The original bit sharpener can be used with the New
Style Cutting Bits using SERDI adapter tooling bracket
(Reference : 021960)
4
SERDI original cutting system tooling range for seats machining
Capacity (seat
Ø)
Ø18 to Ø30 mm
Ø0.70’’ to Ø 1.180’’
Ø28 to Ø42 mm
Ø1.100’’ to Ø1.650’’
Ø40 to Ø58mm
Ø1.570’’ to Ø2.280’’
Ø40 to Ø60 mm
Ø1.570’’ to Ø2.360’’
Ø58 to Ø80 mm
Ø2.280’’ to Ø3.150’’
Tool-holder
Cutting bit
holder
Pilot
Cutting bit
A1 AL10
AL11
AL12
AL13 B1 B2 B4
S5100
Ref 010021
S5300
Ref 404079
S2000
Ref 303390
S2001
Ref 303391
S2002
Ref 303392
CL type pilot
Ø 9.52 mm - 3/8’’ shank
Ø 3.5 to Ø 14 mm
190 mm - 7.5’’ length
S2003
Ref 303393
S2004
Ref 303394
5
SERDI cutting system «SCS» tooling range for seats machining
Capacity (seat Ø) Ø16 to Ø25 mm
Ø0.630’’ to Ø 0.980’’
Ø20 to Ø30 mm
Ø0.787’’ to Ø1.181’’
Ø28 to Ø40mm
Ø1.102’’ to Ø1.570’’
Ø35 to Ø70 mm
Ø1.380’’ to Ø2.760’’
Ø60 to Ø120 mm
Ø2.360’’ to Ø4.720’’
Tool-holder
Cutting bit
holder
Pilot
Cutting bit
S5700
Ref 019583
S5710
Ref 014154
S5731
Ref 020762
S2700
0° rake angle
Ref 921228
S2710
0° rake angle
Ref 919409
S2710
8° rake angle
Ref 019409
S2711
0° rake angle
Ref 918768
S2711
8° rake angle
Ref 018768
S2730
0° rake angle
Ref 919513
S2730
8° rake angle
Ref 019513
E1/D1
8° draft angle
Ref 0xxxxx
D2/E2/E3
8° draft angle
Ref 9xxxxx
D2/E2/E3
14° draft angle
Ref 0xxxxx
D2/E2/E3
14° draft angle
Ref 0xxxxx
D2/E2/E3
8° draft angle
Ref 9xxxxx
CL type pilot
Ø 9.52 mm - 3/8’’ shank
190 mm - 7.5’’ length
E type pilot
Ø 20 mm - .78’’ shank
CL type pilot
Ø 9.52 mm - 3/8’’ shank
190 mm - 7.5’’ length
6
SERDI cutting system «SCS» tooling range for seats machining
Machining
capacity
Ø16 to Ø25 mm
Ø0.630’’ to Ø 0.980’’
Ø20 to Ø40 mm
Ø0.787’’ to Ø1.181’’
Ø35 to Ø70mm
Ø1.102’’ to Ø1.570’’
Ø60 to Ø120 mm
Ø2.360’’ to Ø4.720’’
Tool-holder
Cutting bit
holder
Pilot
Cutting bit
S2700-TRI-0
Ref 035777
S2700-TRI-10
Ref 035778
S2700TRI-20
Ref 035779
S2700 TRI-30
Ref 035780
S2700 TRI-45
Ref 035781
S2700-TRI-60
Ref 035782
S2711-TRI-0
Ref 034665
S2711-TRI-10
Ref 034667
S2711-TRI-20
Ref 034669
S2711-TRI-30
Ref 034671
S2711-TRI-45
Ref 034673
S2711-TRI-60
Ref 034675
S2730-TRI-0
Ref 034664
S2730-TRI-10
Ref 034666
S2730-TRI-20
Ref 034668
S2730-TRI-30
Ref 034670
S2730-TRI-45
Ref 034672
S2730-TRI-60
Ref 034674
S5700
Ref 019583
S5710
Ref 014154
S5731
Ref 020762
CL type pilot
Ø 9.52 mm - 3/8’’ shank
190 mm - 7.5’’ length
E type pilot
Ø 20 mm - .78’’ shank
CL type pilot
Ø 9.52 mm - 3/8’’ shank
190 mm - 7.5’’ length
FULL FACE
CBN BIT
Ref 031742
FULL FACE
CBN BIT
Ref 033223
7
Tool holders
Original style
010021 SERDI 5100
753313 Pilot tightening screw (HC M5x8) x 1
753313 Tightening screw for cutting bit holder (HC M5x8) x 2
Only for cutting bit holder #2000, #2001, #2002
For the entire range of SERDI seat and guide machines
Accomodates any pilot size with Ø 9.52mm - 3/8’’ shank
Accomodates the entire range of milling cutters for valve seat
pocket counterboring
404079 SERDI 5300
753313 Pilot tightening screw (HC M5x8) x 1
753313 Tightening screw for cutting bit holder (HC M5x8) x 2
Only for cutting bit holder #2003, #2004
For the entire range of SERDI seat and guide machines
Accomodates any pilot size with Ø 9.52mm - 3/8’’ shank
304443 SERDI 5100 + 2’’
753313 Pilot tightening screw (HC M5x8) x 1
753313 Tightening screw for cutting bit holder (HC M5x8) x 2
Only for cutting bit holder #2000, #2001, #2002
For the entire range of SERDI seat and guide machines
Accomodates any pilot size with Ø 9.52mm - 3/8’’ shank
Accomodates the entire range of milling cutters for valve seat
pocket counterboring
002884 SERDI 5300 + 6’’
753340 Pilot tightening screw (HC M5x16) x 1
753313 Tightening screw for cutting bit holder (HC M5x8) x 2
Only for cutting bit holder #2003, #2004
For the entire range of SERDI seat and guide machines
Accomodates any pilot size with Ø 9.52mm - 3/8’’ shank
8
Tool holders
SCS / TRI
019583 SERDI 5700
753323 Pilot tightening screw (HC M5x10) x 1
753313 Tightning screw for cutting bit holder (HC M5x8) x 2
Only for cutting bit holder #2700
For the entire range of SERDI seat and guide machines
Accomodates any pilot size with Ø 9.52mm - 3/8’’ shank
014154 SERDI 5710
753332 Pilot tightening screw (HC M5x12) x 1
753313 Tightening screw for cutting bit holder (HC M5x8) x 4
Only for cutting bit holder #2700, #2710 and #2711
For the entire range of SERDI seat and guide machines
Accomodates any pilot size with Ø 9.52mm - 3/8’’ shank
020762 SERDI 5731
753350 Pilot tightening screw (HC M5x20) x 1
753313 Tightening screw for cutting bit holder (HC M5x8) x 6
Only for cutting bit holder #2730
For the entire range of SERDI seat and guide machines,
except SERDI 3.0, SERDI 1.1 and SERDI 3.5
Accomodates any pilot size with Ø 20mm - 0.787’’ shank
021565 SERDI 5710+2’’
753332 Pilot tightening screw (HC M5x12) x 1
753313 Tightening screw for cutting bit holder (HC M5x8) x 4
Only for cutting bit holder #2700, #2710 and #2711
For the entire range of SERDI seat and guide machines
Accomodates any pilot size with Ø 9.52mm - 3/8’’ shank
9
Tool holders
Special
024527 SERDI 57 MC
753313 Pilot tightening screw (HC M5x8) x 1
Only for SERDI milling cutters
For the entire range of SERDI seat and guide machines
Accomodates any pilot size with Ø 9.52mm - 3/8’’ shank
Accomodates the entire range of milling cutter for valve seat
pocket counterboring
006903 SERDI 3100
Chuck: Morse Taper 2
For Ø2.5 mm to Ø16 mm (3/32’’ to 5/8’’) drills
404115 SERDI 3200
Adaptator IS0 30 (ts in SERDI spindles) to Morse Taper 2
Cutting bit holders
Spare parts
582501 T8 screw driver
The SERDI standard
Torx T8 Screw driver
for original style
tooling
757010 T8 torx screw
The SERDI standard
Torx Screw for original
style tooling
012205 T15 screw driver
The SERDI standard
Torx T15 Screw driver
for new style tooling
SCS
021144 T15 torx screw
The SERDI standard
Torx Screw for new
style tooling SCS
10
Cutting bit holders
Original tooling
303390 SERDI 2000
753220 Adjusting diameter screw (HC M4x10) x 1
757010 Torx screw T8 (HC M3x10) x 1
Only for tool holder #5100
Accomodates carbide cutting bit A and B type
Ø 18 to
30 mm
Ø 0.710’’
to 1.180’’
303391 SERDI 2001
753230 Adjusting diameter screw (HC M4x12) x 1
757010 Torx screw T8 (HC M3x10) x 1
Only for tool holder #5100
Accomodates carbide cutting bit A and B type
Ø 28 to
42 mm
Ø
1.100’’
to 1.65’’
303392 SERDI 2002
753240 Adjusting diameter screw (HC M4x16) x 1
757010 Torx screw T8 (HC M3x10) x 1
Only for tool holder #5100
Accomodates carbide cutting bit A and B type
Ø 40 to
58 mm
Ø 1.57’’
to 2.28’’
303393 SERDI 2003
753415 Adjusting diameter screw (HC M6x16) x 1
757010 Torx screw T8 (HC M3x10) x 1
Only for tool holder #5300
Accomodates carbide cutting bit A and B type
Ø 40 to
60 mm
Ø 1.57’’
to 2.36’’
303394 SERDI 2004
753425 Adjusting diameter screw (HC M6x20) x 1
757010 Torx screw T8 (HC M3x10) x 1
Only for tool holder #5300
Accomodates carbide cutting bit A and B type
Ø 58 to
80 mm
Ø 2.28’’
to 3.15’’
11
Cutting bit holders
SCS
921228 SERDI 2700
753340 Adjusting diameter screw (HC M5x16) x 1
021145 Torx screw T15 (HC M3.5x9.5) x 1
Only for tool holder #5700 and #5710
Negative 0° rake angle: accomodates carbide
cutting bits D1 part #0XXXX (E2 for particular
applications only)
Ø 16 to 30 mm
Ø 0.630’’ to
1.181’’
919409 SERDI 2710 - 0°
753350 Adjusting diameter screw (HC M5x20) x 1
021144 Torx screw T15 (HC M3.5x11) x 1
Only for tool holder #5710
Negative 0° rake angle: accomodates carbide
cutting bits E2, E3, D2 part #9xxxxx
019409 SERDI 2710 - 8°
Ø 28 to 40 mm
Ø 1.102’’ to 1.570’’
753350 Adjusting diameter screw (HC M5x20) x 1
021144 Torx screw T15 (HC M3.5x11) x 1
Only for tool holder #5710
Positive 8° rake angle: accomodates carbide
cutting bits E2, E3, D2 part #0xxxxx
12
Cutting bit holders
SCS
918768 SERDI 2711 - 0°
753370 Adjusting diameter screw (HC M5x30) x 1
021144 Torx screw T15 (HC M3.5x11) x 1
Only for tool holder #5710
Negative 0° rake angle: accomodates carbide
cutting bits E2, E3, D2 part #9xxxxx
018768 SERDI 2711 - 8°
Ø 35 to 70 mm
Ø 1.38’’ to 2.76’’
753370 Adjusting diameter screw (HC M5x30) x 1
021144 Torx screw T15 (HC M3.5x11) x 1
Only for tool holder #5710
Positive 8° rake angle: accomodates carbide
cutting bits E2, E3, D2 part #0xxxxx
919513 SERDI 2730 - 0°
753370 Pilot tightening screw (HC M5x30) x 1
021144 Torx screw T15 (HC M3.5x11) x 1
Only for tool holder #5731
Negative 0° rake angle: accomodates carbide
cutting bits E2, E3, D2 part #9xxxxx
019513 SERDI 2730 - 8°
Ø 60 to 120 mm
Ø 2.36’’ to 4.72’’
753370 Pilot tightening screw (HC M5x30) x 1
021144 Torx screw T15 (HC M3.5x11) x 1
Only for tool holder #5731
Positive 8° rake angle: accomodates carbide
cutting bits E2, E3, D2 part #0xxxxx
13
Cutting bit holders
TRI
035777 S2700 TRI-0
753340 Adjusting diameter screw (HC M5x16) x 1
031738 Bit clamp + screw (CHC M3)
For tool holder #5700 and #5710
0° single angle tip holder for triangular cutting bit 6 mm
edges 031742 (order separately).
035778 S2730 TRI-10
753340 Adjusting diameter screw (HC M5x16) x 1
031738 Bit clamp + screw (CHC M3)
For tool holder #5700 and #5710
10° single angle tip holder for triangular cutting bit 6 mm
edges 031742 (order separately).
035779 S2730 TRI-20
753340 Adjusting diameter screw (HC M5x16) x 1
031738 Bit clamp + screw (CHC M3)
For tool holder #5700 and #5710
20° single angle tip holder for triangular cutting bit 6 mm
edges 031742 (order separately).
035780 S2730 TRI-30
753340 Adjusting diameter screw (HC M5x16) x 1
031738 Bit clamp + screw (CHC M3)
For tool holder #5700 and #5710
30° single angle tip holder for triangular cutting bit 6 mm
edges 031742 (order separately).
035781 S2730 TRI-45
753340 Adjusting diameter screw (HC M5x16) x 1
031738 Bit clamp + screw (CHC M3)
For tool holder #5700 and #5710
45° single angle tip holder for triangular cutting bit 6 mm
edges 031742 (order separately).
035782 S2730 TRI-60
753340 Adjusting diameter screw (HC M5x16) x 1
031738 Bit clamp + screw (CHC M3)
For tool holder #5700 and #5710
60° single angle tip holder for triangular cutting bit 6 mm
edges 031742 (order separately).
Ø with S5700
- mini Ø16 mm - 0.630’’
- maxi Ø25 mm - 0.980’’
Ø with S5710
- mini Ø20 mm
- maxi Ø40 mm
14
Ø with S5710
- mini Ø35 mm
- maxi Ø70 mm
Cutting bit holders
TRI
034665 S2711 TRI-0
753370 Adjusting diameter screw (HC M5x30) x 1
032263 Bit clamp + screw (CHC M4)
Only for tool holder #5710
0° single angle tip holder for triangular cutting bit 11 mm
edges 033223 (order separately).
034667 S2711 TRI-10
753370 Adjusting diameter screw (HC M5x30) x 1
032263 Bit clamp + screw (CHC M4)
Only for tool holder #5710
10° single angle tip holder for triangular cutting bit 11
mm edges 033223 (order separately).
034669 S2711 TRI-20
753370 Adjusting diameter screw (HC M5x30) x 1
032263 Bit clamp + screw (CHC M4)
Only for tool holder #5710
20° single angle tip holder for triangular cutting bit 11
mm edges 033223 (order separately).
034671 S2711 TRI-30
753370 Adjusting diameter screw (HC M5x30) x 1
032263 Bit clamp + screw (CHC M4)
Only for tool holder #5710
30° single angle tip holder for triangular cutting bit 11
mm edges 033223 (order separately).
034673 S2711 TRI-45
753370 Adjusting diameter screw (HC M5x30) x 1
032263 Bit clamp + screw (CHC M4)
Only for tool holder #5710
45° single angle tip holder for triangular cutting bit 11
mm edges 033223 (order separately).
034675 S2711 TRI-60
753370 Adjusting diameter screw (HC M5x30) x 1
032263 Bit clamp + screw (CHC M4)
Only for tool holder #5710
60° single angle tip holder for triangular cutting bit 11
mm edges 033223 (order separately).
15
Cutting bit holders
TRI
034664 S2730 TRI-0
753370 Adjusting diameter screw (HC M5x30) x 1
032263 Bit clamp + screw (CHC M4)
Only for tool holder #5731
0° single angle tip holder for triangular cutting bit 11 mm
edges 033223 (order separately).
034666 S2730 TRI-10
753370 Adjusting diameter screw (HC M5x30) x 1
032263 Bit clamp + screw (CHC M4)
Only for tool holder #5731
10° single angle tip holder for triangular cutting bit 11
mm edges 033223 (order separately).
034668 S2730 TRI-20
753370 Adjusting diameter screw (HC M5x30) x 1
032263 Bit clamp + screw (CHC M4)
Only for tool holder #5731
20° single angle tip holder for triangular cutting bit 11
mm edges 033223 (order separately).
034670 S2730 TRI-30
753370 Adjusting diameter screw (HC M5x30) x 1
032263 Bit clamp + screw (CHC M4)
Only for tool holder #5731
30° single angle tip holder for triangular cutting bit 11
mm edges 033223 (order separately).
034672 S2730 TRI-45
753370 Adjusting diameter screw (HC M5x30) x 1
032263 Bit clamp + screw (CHC M4)
Only for tool holder #5731
45° single angle tip holder for triangular cutting bit 11
mm edges 033223 (order separately).
034674 S2730 TRI-60
753370 Adjusting diameter screw (HC M5x30) x 1
032263 Bit clamp + screw (CHC M4)
Only for tool holder #5731
60° single angle tip holder for triangular cutting bit 11
mm edges 033223 (order separately).
Ø with S5731
- mini Ø60 mm
- maxi Ø120 mm
16
Log in and access to our online shop
Look for spare parts thanks to our
virtual machine, among all our
previous and new models.
Order any parts tting your Serdi
machine, from tool holders to pilots
through valve seats or cutting bits.
Content is regularly updated,
including machine web brochures,
videos and coming trade shows
where we will exhibit, so stay tuned !
www.SERDI.com
www.facebook .com/serdi.machines
17
Cutting bits 45°
1.2 mm (.0472’’)
30°- 1.39 mm (.0547’’)
45°- 1.00 mm (.0393’’)
60°
022736 ADS001-E1
922735 ADN001-E2
022735 ADP001-E2
000612 SC001-A1
2 mm (.0787’’)
30°- 2.31 mm (.0909’’)
45°- 1.00 mm (.0393’’)
60°
022728 ADS002-E1
922833 ADN002-E2
022833 ADP002-E2
006351 SC002-A1
1.2 mm (.0472’’)
30°- 1.39 mm (.0547’’)
45°- 1.30 mm (.0511’’)
60°
022838 ADS003-E1
922839 ADN003-E2
022839 ADP003-E2
012735 SC003-A1
1.6 mm (.0629’’)
30°- 1.85 mm (.073’’)
45°- 1.30 mm (.0511’’)
60°
022840 ADS004-E1
922841 ADN004-E2
022841 ADP004-E2
021856 SC004-A1
2 mm (.0787’’)
37°- 2.50 mm (.0984’’)
45°- 1.30 mm (.0511’’)
52°
022844 ADS005-E1
922845 ADN005-E2
022845 ADP005-E2
000691 SC005-A1
2 mm (.0787’’)
37°- 2.31 mm (.0909’’)
45°- 1.30 mm (.0511’’)
60°
022842 ADS006-E1
922843 ADN006-E2
022843 ADP006-E2
000693 SC006-A1
1.8 mm (.0708’’)
37°- 2.25 mm (.0885’’)
45°- 1.50 mm (.059’’)
52°
022862 ADS007-E1
922861 ADN007-E2
022861 ADP007-E2
000764 SC007-A1
1.8 mm (.0708’’)
15°- 1.86 mm (.0732’’)
45°- 1.50 mm (.059’’)
60°
022858 ADS008-E1
922857 ADN008-E2
022857 ADP008-E2
000768 SC008-A1
1.8 mm (.0708’’)
30°- 2.08 mm (.0818’’)
45°- 1.50 mm (.059’’)
52°
022860 ADS009-E1
922859 ADN009-E2
022859 ADP009-E2
012736 SC009-A1
18
Cutting bits 45°
2 mm (.0787’’)
30°- 2.31 mm (.0909’’)
45°- 1.50 mm (.059’’)
60°
022864 ADS010-E1
922863 ADN010-E2
022863 ADP010-E2
000778 SC010-A1
3 mm (.1181’’)
30°- 3.46 mm (.1362’’)
45°- 1.50 mm (.059’’)
60°
025361 ADS011-E1
927018 ADN011-E2
027018 ADP011-E2
009476 SC011-A1
1.2 mm (.0472’’)
30°- 1.39 mm (.547’’)
45°- 1.60 mm (.063’’)
52°
025344 ADS012-E1
927011 ADN012-E2
027011 ADP012-E2
000791 SC012-A1
1.2 mm (.0472’’)
30°- 1.39 mm (.0547’’)
45°- 1.60 mm (.063’’)
60°
022868 ADS013-E1
922867 ADN013-E2
022867 ADP013-E2
000792 SC013-A1
1.4 mm (.0551’’)
30°- 1.61 mm (.0633’’)
45°- 1.60 mm (.063’’)
60°
022872 ADS014-E1
922871 ADN014-E2
022871 ADP014-E2
019175 SC014-A1
1.6 mm (.0629’’)
15°- 1.66 mm (.0653’’)
45°- 1.60 mm (.063’’)
60°
022874 ADS015-E1
922873 ADN015-E2
022873 ADP015-E2
019176 SC015-A1
1.6 mm (.063’’)
30°- 1.85 mm (.0728’’)
45°- 1.60 mm (.063’’)
52°
025345 ADS016-E1
927127 ADN016-E2
027127 ADP016-E2
025215 SC016-A1
1.6 mm (.063’’)
30°- 1.85 mm (.0728’’)
45°- 1.60 mm (.063’’)
60°
022870 ADS017-E1
922869 ADN017-E2
022869 ADP017-E2
000796 SC017-A1
1.8 mm (.071’’)
30°- 2.08 mm (.0818’’)
45°- 1.60 mm (.063’’)
52°
022878 ADS018-E1
922877 ADN018-E2
022877 ADP018-E2
000798 SC018-A1
19
Cutting bits 45°
2 mm (.0787’’)
15°- 2.08 mm (.0818’’)
45°- 1.60 mm (.0629’’)
60°
022876 ADS019-E1
922875 ADN019-E2
022875 ADP019-E2
000801 SC019-A1
2 mm (.0787’’)
30°- 2.3 mm (.0905’’)
45°- 1.60 mm (.0629’’)
52°
022881 ADS020-E1
922882 ADN020-E2
022882 ADP020-E2
012831 SC020-A1
2 mm (.0787’’)
30°- 2.3 mm (.0905’’)
45°- 1.60 mm (.0629’’)
60°
022880 ADS021-E1
922879 ADN021-E2
022879 ADP021-E2
000802 SC021-A1
3 mm (.1181’’)
30°- 3.46 mm (.1362’’)
45°- 1.60 mm (.063’’)
60°
025349 ADS022-E1
925348 ADN022-E2
025348 ADP022-E2
024914 SC022-A1
3 mm (.1181’’)
30°- 3.46 mm (.1362’’)
45°- 1.80 mm (.0708’’)
60°
025351 ADS023-E1
925350 ADN023-E2
025350 ADP023-E2
025069 SC023-A1
1.2 mm (.0472’’)
30°- 1.39 mm (.0547’’)
45°- 1.90 mm (.0748’’)
52°
025352 ADS024-E1
927094 ADN024-E2
027094 ADP024-E2
024900 SC024-A1
1.2 mm (.0472’’)
30°- 1.39 mm (.0547’’)
45°- 1.90 mm (.0748’’)
60°
022892 ADS025-E1
922891 ADN025-E2
022891 ADP025-E2
000833 SC025-A1
1.6 mm (.0.63’’)
30°- 1.85 mm (.0728’’)
45°- 1.90 mm (.0748’’)
60°
022898 ADS026-E1
922897 ADN026-E2
022897 ADP026-E2
000841 SC026-A1
1.8 mm (.0.708’’)
30°- 2.08 mm (.0818’’)
45°- 1.90 mm (.0748’’)
52°
022912 ADS027-E1
922899 ADN027-E2
022899 ADP027-E2
000851 SC027-A1
20
Cutting bits 45°
2 mm (.0787’’)
30°- 2.31 mm (.0909’’)
45°- 1.90 mm (.0748’’)
52°
022916 ADS028-E1
922915 ADN028-E2
022915 ADP028-E2
019177 SC028-A1
2 mm (.0787’’)
30°- 2.31 mm (.0909’’)
45°- 1.90 mm (.0748’’)
60°
022914 ADS029-E1
922913 ADN029-E2
022913 ADP029-E2
000854 SC029-A1
1.6 mm (.0629’’)
30°- 1.85 mm (.0728’’)
45°- 2 mm (.0787’’)
70°
025356 ADS030-E1
925355 ADN030-E2
025355 ADP030-E2
023384 SC030-A1
1.6 mm (.0629’’)
30°- 1.85 mm (.0728’’)
45°- 2 mm (.0787’’)
75°
023669 ADS031-E1
925357 ADN031-E2
025357 ADP031-E2
023385 SC031-A1
1.4 mm (.0551’’)
30°- 1.62 mm (.0637’’)
45°- 2.2 mm (.0866’’)
60°
025359 ADS032-E1
925358 ADN032-E2
025358 ADP032-E2
000962 SC032-A1
2 mm (.0787’’)
30°- 2.31 mm (.0909’’)
45°- 2.3 mm (.0905’’)
60°
025360 ADS033-E1
927100 ADN033-E2
027100 ADP033-E2
000997 SC033-A1
2 mm (.0787’’)
30°- 2.31 mm (.0909’’)
45°- 2.5 mm (.0984’’)
60°
022942 ADS034-E1
922937 ADN034-E2
022937 ADP034-E2
012832 SC034-A1
1.6 mm (.0629’’)
35°- 1.95 mm (.0767’’)
45°- 1 mm (.0393’’)
52°
025341 ADS035-E1
925340 ADN035-E2
025340 ADP035-E2
025006 SC035-A1
1.6 mm (.0629’’)
35°- 1.95 mm (.0767’’)
45°- 1 mm (.0393’’)
60°
025343 ADS036-E1
925342 ADN036-E2
025342 ADP036-E2
000621 SC036-A1
21
Cutting bits 45°
1.4 mm (.0551’’)
30°- 1.62 mm (.0637’’)
45°- 1.5 mm (.0590’’)
60°
022852 ADS037-E1
922851 ADN037-E2
022851 ADP037-E2
008605 SC037-A1
2 mm (.0787’’)
35°- 2.44 mm (.0960’’)
45°- 1.6 mm (.0629’’)
55°
025347 ADS038-E1
925346 ADN038-E2
025346 ADP038-E2
023445 SC038-A1
2 mm (.0787’’)
35°- 2.44 mm (.0960’’)
45°- 1.9 mm (.0748’’)
55°
025354 ADS039-E1
925353 ADN039-E2
025353 ADP039-E2
023457 SC039-A1
Cutting bits 30°
1 mm (.0393’’)
15°- 1.04 mm (.0409’’)
30°- 1.3 mm (.0511’’)
45°
022666 ADS300-E1
922665 ADN300-E2
022665 ADP300-E2
019162 SC300-A1
2 mm (.0787’’)
15°- 2.07 mm (.0814’’)
30°- 1.3 mm (.0511’’)
45°
022668 ADS301-E1
922667 ADN301-E2
022667 ADP301-E2
011648 SC301-A1
2 mm (.0787’’)
15°- 2.07 mm (.0814’’)
30°- 1.3 mm (.0511’’)
60°
022670 ADS302-E1
922669 ADN302-E2
022669 ADP302-E2
019163 SC302-A1
1.4 mm (.0551’’)
15°- 1.45 mm (.0570’’)
30°- 1.5 mm (.0590’’)
45°
022676 ADS303-E1
922673 ADN303-E2
022673 ADP303-E2
019164 SC303-A1
1.8 mm (.0708’’)
15°- 1.86 mm (.0732’’)
30°- 1.5 mm (.0590’’)
45°
025367 ADS304-E1
925188 ADN304-E2
025188 ADP304-E2
000756 SC304-A1
2 mm (.0787’’)
15°- 2.07 mm (.0814’’)
30°- 1.5 mm (.0590’’)
60°
025368 ADS305-E1
927114 ADN305-E2
027114 ADP305-E2
012367 SC305-A1
22
Cutting bits 30°
1.2 mm (.0472’’)
15°- 1.24 mm (.0488’’)
30°- 1.6 mm (.063’’)
45°
022688 ADS306-E1
922679 ADN306-E2
022679 ADP306-E2
019166 SC306-A1
1.8 mm (.0708’’)
15°- 1.86 mm (.0732’’)
30°- 1.6 mm (.0629’’)
45°
025369 ADS307-E1
927044 ADN307-E2
027044 ADP307-E2
024903 SC307-A1
1.8 mm (.0708’’)
15°- 1.86 mm (.0732’’)
30°- 1.6 mm (.0629’’)
52°
022692 ADS308-E1
922687 ADN308-E2
022687 ADP308-E2
000797 SC308-A1
2 mm (.0787’’)
15°- 2.07 mm (.0814’’)
30°- 1.6 mm (.0629’’)
45°
022694 ADS309-E1
922689 ADN309-E2
022689 ADP309-E2
000800 SC309-A1
2 mm (.0787’’)
15°- 2.07 mm (.0814’’)
30°- 1.6 mm (.0629’’)
60°
022696 ADS310-E1
922691 ADN310-E2
022691 ADP310-E2
019167 SC310-A1
2.2 mm (.0866’’)
15°- 2.28 mm (.0897’’)
30°- 1.6 mm (.0629’’)
60°
025371 ADS311-E1
925370 ADN311-E2
025370 ADP311-E2
000279 SC311-A1
2 mm (.0787’’)
15°- 2.07 mm (.0814’’)
30°- 1.8 mm (.0708’’)
45°
022700 ADS312-E1
922695 ADN312-E2
022695 ADP312-E2
019168 SC312-A1
1 mm (.0393’’)
15°- 1.04 mm (.0409’’)
30°- 1.9 mm (.0748’’)
45°
022702 ADS313-E1
922697 ADN313-E2
022697 ADP313-E2
000824 SC313-A1
2 mm (.0787’’)
15°- 2.07 mm (.0814’’)
30°- 1.9 mm (.0748’’)
60°
022708 ADS314-E1
922703 ADN314-E2
022703 ADP314-E2
006256 SC314-A1
23
Cutting bits 30°
1.2 mm (.0472’’)
15°- 1.24 mm (.0488’’)
30°- 2 mm (.0787’’)
45°
022710 ADS315-E1
922705 ADN315-E2
022705 ADP315-E2
012833 SC315-A1
2 mm (.0787’’)
15°- 2.07 mm (.0814’’)
30°- 2 mm (.0787’’)
45°
022716 ADS316-E1
922353 ADN316-E2
022353 ADP316-E2
019169 SC316-A1
2 mm (.0787’’)
15°- 2.07 mm (.0814’’)
30°- 2.2 mm (.087’’)
60°
022720 ADS317-E1
922711 ADN317-E2
022711 ADP317-E2
019170 SC317-A1
3 mm (.1181’’)
20°- 3.19 mm (.1255’’)
30°- 3.8 mm (.1496’’)
45°
025372 ADS318-E1
924962 ADN318-E2
024962 ADP318-E2
024925 SC318-A1
24
Cutting bits 37.5°
1.4 mm (.0551’’)
30°- 1.62 mm (.0637’’)
37.5°- 1.6 mm (.0629’’)
60°
025362 ADS400-E1
925189 ADN400-E2
025189 ADP400-E2
019509 SC400-A1
2 mm (.0787’’)
30°- 2.31 mm (.0909’’)
37.5°- 1.6 mm (.0629’’)
60°
025363 ADS401-E1
925103 ADN401-E2
025103 ADP401-E2
025216 SC401-A1
1.4 mm (.0551’’)
30°- 1.62 mm (.0637’’)
37.5°
- 1.9 mm (.0748’’)
60°
022952 ADS402-E1
922949 ADN402-E2
022949 ADP402-E2
019183 SC402-A1
2 mm (.0787’’)
30°- 2.31 mm (.0909’’)
37.5°- 2 mm (.0787’’)
60°
022954 ADS403-E1
922951 ADN403-E2
022951 ADP403-E2
024913 SC403-A1
1.4 mm (.0551’’)
18°- 1.47 mm (.0578’’)
37.5°- 2.1 mm (.0826’’)
52°
022956 ADS404-E1
922953 ADN404-E2
022953 ADP404-E2
019186 SC404-A1
25
Cutting bits straight seat angles
15°- 8 mm (.3149’’)
022375 ADS500-E1
921966 ADN500-E2
021966 ADP500-E2
000106 SC500-A1
20°- 9 mm (.3543’’)
022376 ADS501-E1
921967 ADN501-E2
021967 ADP501-E2
025292 SC501-A1
30°- 9 mm (.3543’’)
022378 ADS502-E1
920618 ADN502-E2
020618 ADP502-E2
000593 SC502-A1
45°- 9 mm (.3543’’)
022379 ADS503-E1
920619 ADN503-E2
020619 ADP503-E2
000647 SC503-A1
45.25°- 8 mm (.3149’’)
022388 ADS504-E1
922389 ADN504-E2
022389 ADP504-E2
019153 SC504-A1
60°- 9 mm (.3543’’)
022394 ADS505-E1
922182 ADN505-E2
022182 ADP505-E2
000865 SC505-A1
70°- 16.8 mm (.6614’’)
022397 ADS506-E1
922396 ADN506-E2
022396 ADP506-E2
019154 SC506-B1
75°- 8.3 mm (.3267’)
022398 ADS507-E1
922185 ADN507-E2
022185 ADP507-E2
000872 SC507-A1
75°- 16.4 mm (.6456’’)
025250 ADS508-E1
922408 ADN508-E3
022408 ADP508-E3
013377 SC508-B1
26
Cutting bits straight seat angles
80°- 12.1 mm (.4763’’)
022411 ADS509-E1
922412 ADN509-E2
022412 ADP509-E2
025217 SC509-B1
82°- 11.5 mm (.4527’’)
022400 ADS510-E1
923370 ADN510-E3
023370 ADP510-E3
025364 SC510-B1
R 0.8 mm (.0314’’)
0°
019584 D1
- -
- -
005168 SC511 (AL11)
R 0.8 mm (.0314’’)
0°
- -
917323 D2
017323 D2
005164 SC512 (AL12)
R 0.5 mm (.0196’’)
0°
- -
927053 ADN513-E2
027053 ADP513-E3
013344 SC513 (L12 OFFSET)
27
Cutting bits performance seat angles
2.52 mm (.0992’’)
R2.5 mm (.0984’’)
38°- 2.4 mm (.0944’’)
45°- 1 mm (.0393’’)
60°
025448 ADS600-E1
924189 ADN600-E2
024189 ADP600-E2
013338 SC600-B1
1.49 mm (.0586’’)
R1 mm (.0393’’)
35°- 1.3 mm (.0511’’)
45°- 1 mm (.0393’’)
60°- 2.5 mm (.0984’’)
75°
025459 ADS601-E1
924190 ADN601-E2
024190 ADP601-E2
013342 SC601-B1
2.06 mm (.0811’’)
R1 mm (.0393’’)
35°- 2 mm (.0787’’)
45°- 1.3 mm (.0511’’)
56°
025460 ADS602-E1
924191 ADN602-E2
024191 ADP602-E2
013337 SC602-B1
R12 mm (.4724’’)
45°- 6 mm (.2362’’)
- -
927058 ADN603-E2
027058 ADP603-E3
013343 SC603-B1
2.9 mm (.1141’’)
R2 mm (.0787’’)
35°- 2.5 mm (.0984’’)
45°- 1.3 mm (.0511’’)
60°- 1.7 mm (.0669’’)
75°- 2.2 mm (.0866’’)
82°
- -
925463 ADN604-E2
025463 ADP604-E2
013924 SC604-B1
2.1 mm (.0826’’)
35°- 2.56 mm (.1007’’)
45°- 1 mm (.0393’’)
55°- 2.5 mm (.0984’’)
65°- 2.5 mm (.0984’’)
75°
- -
925487 ADN605-E2
025487 ADP605-E2
013332 SC605-B2
1.92 mm (.0755’’)
40°- 2.5 mm (.0984’’)
45°- 1.3 mm (.0511’’)
55°- 2.5 mm (.0984’’)
65°- 2.5 mm (.0984’’)
75°
- -
927021 ADN606-E2
027021 ADP606-E2
001318 SC606-B1
1.86 mm (.0732’’)
R1.5 mm (.0590’’)
35°- 1.5 mm (.0590’’)
45°- 1.5 mm (.
0590
’’)
R12 mm (.4724’’)
75°- 3 mm (.1181’’)
R3.5 mm (.1377’’)
45°
026069 ADS607-E1
921301 ADN607-E2
021301 ADP607-E2
013327 SC607-B1
1.9 mm (.0748’’)
R1.5 mm (.0590’’)
35°- 1.54 mm (.0606’’)
45°- 1 mm (.
0393
’’)
R12 mm (.4724’’)
75°- 3 mm (.1181’’)
R3.5 mm (.1377’’)
45°
026070 ADS608-E1
921302 ADN608-E2
021302 ADP608-E2
019205 SC608-B1
28
Cutting bits performance seat angles
1.9 mm (.0748’’)
R1.5 mm (.0590’’)
35°- 1.54 mm (.0606’’)
45°- 2.5 mm (.
098
’’)
R12 mm (.4724’’)
75°- 3 mm (.1181’’)
R3.5 mm (.1377’’)
45°
- -
925489 ADN609-E2
025489 ADP609-E2
025219 SC609-B1
1.86 mm (.0732’’)
R1.5 mm (.0590’’)
35°- 1.5 mm (.0590’’)
45°- 1.5 mm (.
059
’’)
R12 mm (.4724’’)
85°- 3 mm (.1181’’)
75°
- -
927023 ADN610-E3
027023 ADP610-E3
013923 SC610-B1
2.2 mm (.0866’’)
R1.5 mm (.0590’’)
15°- 0.41 mm (.0161’’)
30°- 0.8 mm (.
0314
’’)
45°- 0.8 mm (.0314’’)
60°- 0.8 mm (.0314’’)
75°
022270 ADS611-E1
927075 ADN611-E2
027075 ADP611-E2
013925 SC611-A1
1.23 mm (.0484’’)
R1.2 mm (.0472’’)
25°- 0.6 mm (.0236’’)
45°- 0.8 mm (.0314’’)
65°- 0.6 mm (.
0236
’’)
75°
- 3.8 mm (.149’’)
45°
026284 ADS612-E1
925464 ADN612-E2
025464 ADP612-E2
024938 SC612-A1
1.86 mm (.0732’’)
R 2 mm (.0787’’)
30°- 1 mm (.0393’’)
45°- 0.8 mm (.0314’’)
60°- 0.6 mm (.
0236
’’)
R 7 mm (.2755’’)
022272 ADS613-E1
925465 ADN613-E2
025465 ADP613-E2
009806 SC613-A1
R 4 mm (.1574’’)
15°- 5.5mm (.2165’’)
022439 ADS614-E1
922440 ADN614-E2
022440 ADP614-E2
012835 SC614-A1
R 4 mm (.1574’’)
30°- 5.7mm (.2244’’)
022450 ADS615-E1
922482 ADN615-E2
022482 ADP615-E2
019157 SC615-A1
R 5 mm (.1968’’)
15°- 5 mm (.1968’’)
025365 ADS616-E1
925366 ADN616-E2
027113 ADP616-E2
025200 SC616-A1
R 5 mm (.1968’’)
30°- 6 mm (.2362’’)
022483 ADS617-E1
922484 ADN617-E2
022484 ADP617-E2
019158 SC617-A1
29
Cutting bits performance seat angles
R 7 mm (.2755’’)
15°- 4.1 mm (.1614’’)
022437 ADS618-E1
922438 ADN618-E2
022438 ADP618-E2
019155 SC618-A1
R 7 mm (.2755’’)
30°- 4.4 mm (.1732’’)
022447 ADS619-E1
922449 ADN619-E2
022449 ADP619-E2
019156 SC619-A1
R 7 mm (.2755’’)
15°- 6.4 mm (.2519’’)
- -
922442 ADN620-E3
022442 ADP620-E3
013328 SC620-B1
75°- 12 mm (.4724’)
R 7 mm (.2755’’)
026283 ADS621-E1
922499 ADN621-E3
022499 ADP621-E3
009225 SC621-B1
80°- 9 mm (.3543’)
R 7 mm (.2755’’)
025080 ADS622-E1
922522 ADN622-E3
022522 ADP622-E3
013926 SC622-B1
1.26 mm (.0496’’)
R 0.8 mm (.0314’’)
30°- 1 mm (.0393’’)
45°- 1 mm (.0
393
’’)
60°- 1 mm (.
0393
’’)
R 13 mm (.5118’’)
R 1.5 mm (.0590’’)
025001 ADS623-E1
923369 ADN623-E2
023369 ADP623-E2
012834 SC623-A1
1.31 mm (.0515’’)
R 1 mm (.0393’’)
32°- 1 mm (.0393’’)
45°- 0.8 mm (.0
314
’’)
60°
026282 ADS624-E1
927024 ADN624-E2
027024 ADP624-E2
019523 SC624-A1
1.55 mm (.0610’’)
R 1.5 mm (.0590’’)
32°- 1 mm (.0393’’)
45°- 0.8 mm (.0
314
’’)
60°
026028 ADS625-E1
927012 ADN625-E2
027012 ADP625-E2
025192 SC625-A2
1.61 mm (.0633’’)
R 1.5 mm (.0590’’)
30°- 1 mm (.0393’’)
45°- 1 mm (.0
393
’’)
60°
023049 ADS626-E1
924016 ADN626-E2
024016 ADP626-E2
001260 SC626-A1
30
Cutting bits performance seat angles
2 mm (.0787’’)
R 1.5 mm (.0590’’)
15°- 1 mm (.0393’’)
45°- 1 mm (.0
393
’’)
75°
025468 ADS627-E1
925469 ADN627-E2
025469 ADP627-E2
014887 SC627-A1
2.08 mm (.0818’’)
R 1.5 mm (.0590’’)
15°- 1 mm (.0393’’)
45°- 1 mm (.0
393
’’)
75°
026031 ADS628-E1
927031 ADN628-E2
027031 ADP628-E2
025220 SC628-A2
1.36 mm (.0535’’)
R 1.5 mm (.0590’’)
38°- 1 mm (.0393’’)
45°- 1.1 mm (.0
433
’’)
60°
025083 ADS629-E1
927128 ADN629-E2
027128 ADP629-E2
024943 SC629-A1
1.36 mm (.054’’)
R 1.5 mm (.0590’’)
38°- 1 mm (.0393’’)
45°- 1.1 mm (.0
43
’’)
60°
026257 ADS630-E1
927118 ADN630-E2
027118 ADP630-E2
024901 SC630-A2
1.6 mm (.0629’’)
R 1.5 mm (.0590’’)
30°- 1 mm (.0393’’)
45°- 1.3 mm (.0
511
’’)
60°
025089 ADS631-E1
925471 ADN631-E2
025471 ADP631-E2
025490 SC631-A1
1.6 mm (.0629’’)
R 1.5 mm (.0590’’)
30°- 1 mm (.0393’’)
45°- 1.3 mm (.0
511
’’)
60°
025420 ADS632-E1
925473 ADN632-E2
025473 ADP632-E2
021857 SC632-A2
1.6 mm (.0629’’)
R 1.5 mm (.0590’’)
32°- 1 mm (.0393’’)
45°- 1 mm (.0
393
’’)
60°
026258 ADS633-E1
927064 ADN633-E2
027064 ADP633-E2
025474 SC633-A1
1.6 mm (.0629’’)
R 1.5 mm (.0590’’)
30°- 1 mm (.0393’’)
45°- 1.5 mm (.0
590
’’)
60°
025476 ADS634-E1
925477 ADN634-E2
025477 ADP634-E2
009474 SC634-A1
1.6 mm (.0629’’)
R 1.5 mm (.0590’’)
30°- 1 mm (.0393’’)
45°- 1.5 mm (.0
590
’’)
60°
025184 ADS635-E1
925478 ADN635-E2
025478 ADP635-E2
021859 SC635-A2
31
Cutting bits performance seat angles
1.55 mm (.061’’)
R 1.5 mm (.0590’’)
32°- 1 mm (.0393’’)
45°- 1 mm (.0
393
’’)
60°
026194 ADS637-E1
927106 ADN637-E2
027106 ADP637-E2
024615 SC637-A2
1.6 mm (.0629’’)
R 1.5 mm (.0590’’)
30°- 1 mm (.0393’’)
45°- 1 mm (.0
393
’’)
75°
025479 ADS638-E1
925249 ADN638-E2
025249 ADP638-E2
021860 SC638-A1
1.6 mm (.0629’’)
R 1.5 mm (.0590’’)
30°- 1 mm (.0393’’)
45°- 1 mm (.0
393
’’)
75°
025480 ADS639-E1
927089 ADN639-E2
027089 ADP639-E2
021858 SC639-A2
1.6 mm (.0629’’)
R 1.5 mm (.0590’’)
30°- 1 mm (.0393’’)
45°- 1 mm (.0
393
’’)
75°
025481 ADS640-E1
927025 ADN640-E2
027025 ADP640-E2
025081 SC640-A1
1.6 mm (.0629’’)
R 1.5 mm (.0590’’)
32°- 1 mm (.0393’’)
45°- 1.2 mm (.0
472
’’)
60°
026032 ADS641-E1
927033 ADN641-E2
027033 ADP641-E2
021861 SC641-A2
1.9 mm (.0748’’)
R 1.5 mm (.0590’’)
20°- 1 mm (.0393’’)
45°- 1 mm (.0
393
’’)
60°
025483 ADS642-E1
927076 ADN642-E2
027076 ADP642-E2
028015 SC642-A1
1.9 mm (.075’’)
R 1.5 mm (.0590’’)
20°- 1 mm (.0393’’)
45°- 1 mm (.0
39
’’)
60°
026033 ADS643-E1
927034 ADN643-E2
027034 ADP643-E2
025221 SC643-A2
2.5 mm (.0984’’)
R 3 mm (.1181’’)
30°- 1.16 mm (.0456’’)
45°- 1.2 mm (.
0472
’’)
R13 mm (.5118’’)
75°- 3 mm (.1181’’)
R 3 mm (.
1181
’’)
- -
927115 ADN644-E2
027115 ADP644-E2
022129 SC644-B1
1.59 mm (.0625’’)
R 2 mm (.0787’’)
37°- 1 mm (.0393’’)
45°- 0.8 mm (.
0314
’’)
52°- 0.6 mm (.0236’’)
R 7 mm (.2755’’)
025000 ADS645-E1
927130 ADN645-E2
027130 ADP645-E2
022130 SC645-A1
32
Cutting bits performance seat angles
2 mm (.0787’’)
R 2 mm (.0787’’)
35°- 1.41 mm (.0555’’)
45°- 0.9 mm (.
0354
’’)
65°
025493 ADS646-E1
925494 ADN646-E2
025494 ADP646-E2
024986 SC646-B1
1.29 mm (.0507’’)
30.4°- 1.5 mm (.059’’)
45°- 1.5 mm (.
059
’’)
R 10 mm (.3937’’)
- -
925691 ADN647-E2
025691 ADP647-E2
025222 SC647-A1
1.2 mm (.0472’’)
30°- 1.39 mm (.0547’’)
45°- 1 mm (.
0393
’’)
60°
027998 ADS648-E1
927999 ADN648-E2
027999 ADP648-E2
013378 SC648-B4
75°- 5 mm (.1968’’)
R 10 mm (.3937’’)
90°- 3.5 mm (.1377’’)
R 2.5 mm (.0984’’)
45°- 4.32 mm (.
17
’’)
- -
924192 ADN649-E3
024192 ADP649-E3
023437 SC649-B3
2 mm (.0787’’)
R 1.5 mm (.059’’)
48°- 2.42 mm (.095’’)
50°- 1.1 mm (.
043
’’)
65°- 1.5 mm (.
059
’’)
75°
- -
- -
- -
035013 SC650-B1
1.73 mm (.068’’)
R 1 mm (.039’’)
45°- 2.03 mm (.08’’)
50°- 1.27 mm (.
05
’’)
65°
- 3.82 mm (.15’’)
75°- 1.91 mm (.075’’)
85°- 3.18mm (.125’’)
87°
- -
- -
- -
035014 SC651-B1
33
Cutting bits sale
0.44 mm (.0173’)
15°- 0.46 mm (.0181’’)
40°- 1.85 mm (.0
728
’’)
55°- 2.69 mm (.1059’’)
70°
032228-E1
0.5 mm (.0196’’)
15°- 0.52 mm (.0204’’)
37.5°- 2.18 mm (.0
858
’’)
50°- 1.33 mm (.0523’’)
70°
031233-E1
0.49 mm (.0196’’)
15°- 0.51 mm (.0204’’)
40°- 1.86 mm (.0
73
’’)
55°- 1.18 mm (.046’’)
72°
031234 - E1
0.5 mm (.0196’’)
15°- 0.52 mm (.0204’’)
37°- 1.86 mm (.0
732
’’)
55°- 1.18 mm (.0464’’)
72°
030107-A1
0.5 mm (.0196’’)
15°- 0.52 mm (.0204’’)
29°- 2.18 mm (.0
858
’’)
50°- 1.34 mm (.0527’’)
60°
030109-A1
1.8 mm (.0708’’)
25°- 1.99 mm (.0783’’)
45.25°- 2.6 mm (.1023’’)
52°
024905-A1
1.8 mm (.0708’’)
R 0.8 - (.0314’’)
30°- 1.62 mm (.0637’’)
37.5°- 2 mm (.0
787
’’)
60°
927110-E2
1.8 mm (.0708’’)
R 0.8 - (.0314’’)
15°- 1.25 mm (.0492’’)
30°- 2 mm (.0
787
’’)
60°
927111-E2
1.8 mm (.0708’’)
11°- 1.83 mm (.072’’)
31°- 1.5 mm (.0
590
’’)
60°
928744 -E2
$15
for each bit
of this page
while stock last
34
026135 Collet set with wrenches
014903 32 CHO Collet Holder 028478 11 /32’’ Collet Set
CC-M1240 Collet Wrench 1-1/4 028479 3/8’’ Collet Set
CC-M1248 Collet Wrench 1-1/2 028480 7 /16’’ Collet Set
028473 1/16’’ Collet Set 028481 1/2’’ Collet Set
028474 1/8’’ Collet Set 028482 9/16’’ Collet Set
028475 3/16’’ Collet Set 028483 5/8’’ Collet Set
028476 1/4’’ Collet Set 028484 11 /16’’ Collet Set
028477 5/16’’ Collet Set 028485 3/4’’ Collet Set
Adapt any industrial tooling to the SERDI machines for more job variety
while keeping the precision!
CDR Core Drill Reamers
5/16’’x1/2 Core Drill Reamer 9/16’’x3/8’’ Core Drill Reamer
026097 7/16’’x5/16’’ Core Drill Reamer 5/8’’x1/2’’ Core Drill Reamer
026098 1/2’’x11/32’’ Core Drill Reamer 5/8’’x7/16’’ Core Drill Reamer
026099 1/2’’x3/8’’ Core Drill Reamer .275’’x7/16’’ Cummins 24 V engine
9/16’’x11/32’’ Core Drill Reamer .275’’ x 1/2’’ Core Drill Reamer
Combination of a core drill and a reamer to save time and money as it
reduces the number of tools you need!
Kit 177
Guide Installation with collet set
026097 Combination Core drill-reamer (7/16» X 5/16») 026142 Guide pilot (5/16»)
026098 Combination Core drill-reamer (1/2» X 11/32») 026143 Guide pilot (11/32»)
026099 Combination Core drill-reamer (1/2» X 3/8») 026144 Guide pilot (3/8»)
026136 Air hammer 014056 Allen screwdriver 1.5mm
026139 Spot facer pilot (5/16"'')
026140 Spot facer pilot ( 11 /32»)
026141 Spot facer pilot (3/8»)
Kit 177 Guide Installation without collet set
026137 Guide top cutter spot facer pilots with cone morse #2 (To be added to the kit if
you do not have a collet set )
404115 Morse adapter (To be added to the kit)
Install ANY guide diameters on your cylinder head! Includes different core drill-reamer sizes to
t your cylinder head specications.
Kit 178 Seat Inserts Installation
014992 Seat body driver 014993 6mm pilot for seat driver (.2335 - .2345)
014999 Seat driver 1.040’’ x .980’’ 014995 7mm pilot for seat driver (.2735 - .2745)
015000 Seat driver 1’’ 1/8 X 1’’ 1/4 200192 7.9mm pilot for seat driver (.3100- .311 0)
015001 Seat driver 1’’ 3/8 X 1’’ 1/2 014996 8mm pilot for seat driver (.3125 - .3135)
015002 Seat driver 1’’ 5/8 X 1’’ 3/4 200193 8. 73mm pilot for seat driver (.341 0- .3420)
015003 Seat driver 1’’ 7/8 X 2’’ 200194 9.52mm pilot for seat driver (.3710- .3720)
015004 Seat driver 2’’ 1/8 X 2’’ 1/4
Install most seat diameters on your cylinder head FASTER. Includes different
pilot and seat driver sizes to t your cylinder head specications. With this
kit, Chrome or Nickel inserts can be installed.
Installation / removal of seat and guides
35
Standard Milling Heads
22-C4125 Ø 1- 1/4’’ indexable milling head 22-C4193 Ø 1 - 15/16’’ indexable milling head
22-C4131 Ø 1 - 5/16’’ indexable milling head 22-C4200 Ø 2’’ indexable milling head
22-C4137 Ø 1 - 3/8’’ indexable milling head 22-C4206 Ø 2 - 1/16’’ indexable milling head
22-C4143 Ø 1 - 7/16’’ indexable milling head 22-C4212 Ø 2 - 1/8’’ indexable milling head
22-C4150 Ø 1 - 1/2’’ indexable milling head 22-C4218 Ø 2 - 3/16’’ indexable milling head
22-C4156 Ø 1 - 9/16’’ indexable milling head
22-C4225 Ø 2 - 1/4’’ indexable milling head
22-C4162 Ø 1 - 5/8’’ indexable milling head 22-C4231 Ø 2 - 5/16’’ indexable milling head
22-C4168 Ø 1 - 11/16’’ indexable milling head 22-C4237 Ø 2 - 3/8’’ indexable milling head
22-C4175 Ø 1 - 3/4’’ indexable milling head 22-C4243 Ø 2 - 7/16’’ indexable milling head
22-C4181 Ø 1 - 13/16’’ indexable milling head 22-C4250 Ø 2 - 1/2’’ indexable milling head
22-C4187 Ø 1 - 7/8’’ indexable milling head
Save money now with our
NEW 4 sided Replaceable
Carbide Inserts that yield
four times the life of a single
sided inserts!
Indexable milling heads cutters
Deluxe
Kit 180 - 14 indexable milling heads
22-C4137 1 - 3/8’’ indexable milling head
22-C4143 1 - 7/16’’ indexable milling head
22-C4150 1 - 1/2’’ indexable milling head
22-C4156 1 - 9/16’’ indexable milling head
22-C4162 1 - 5/8’’ indexable milling head
22-C4168 1 - 11/16’’ indexable milling head
22-C4175 1 - 3/4’’ indexable milling head
22-C4181 1 - 13/16’’ indexable milling head
22-C4187 1 - 7/8’’ indexable milling head
22-C4193 1 - 15/16’’ indexable milling head
22-C4200 2’’ indexable milling head
22-C4206 2 - 1/16’’ indexable milling head
22-C4212 2 - 1/8’’ indexable milling head
22-C4218 2 - 3/16’’ indexable milling head
580050 Allen driver 5 mm
001799 Square (.588’’x.588’’x1.56’’)
Standard
Kit 179 - 12 indexable milling heads
22-C4125 Ø 1- 1/4’’ indexable milling head
22-C4131 Ø 1 - 5/16’’ indexable milling head
22-C4137 Ø 1 - 3/8’’ indexable milling head
22-C4143 Ø 1 - 7/16’’ indexable milling head
22-C4150 Ø 1 - 1/2’’ indexable milling head
22-C4156 Ø 1 - 9/16’’ indexable milling head
22-C4162 Ø 1 - 5/8’’ indexable milling head
22-C4168 Ø 1 - 11/16’’ indexable milling head
22-C4175 1 - 3/4’’ indexable milling head
22-C4181 1 - 13/16’’ indexable milling head
22-C4187 1 - 7/8’’ indexable milling head
22-C4193 1 - 15/16’’ indexable milling head
Available as well
in metric sizes:
from Ø26 mm
to Ø 60 mm,
(increment of 1 mm)
36
Standard Milling Heads
001694 Ø 1’’ brazed milling head 001703 Ø 1 - 3/4’’ brazed milling head
001695 Ø 1 - 1/16’’ brazed milling head 001700 Ø 1 - 13/16’’ brazed milling head
001698 Ø 1 - 1/8’’ brazed milling head 001708 Ø 1 - 7/8’’ brazed milling head
001702 Ø 1 - 3/16’’ brazed milling head 001701 Ø 1 - 15/16’’ brazed milling head
001697 Ø 1 - 1/4’’ brazed milling head 001710 Ø 2’’ brazed milling head
001705 Ø 1 - 5/16’’ brazed milling head 001711 Ø 2 - 1/16’’ brazed milling head
001704 Ø 1 - 3/8’’ brazed milling head 001714 Ø 2 - 1/8’’ brazed milling head
001707 Ø 1 - 7/16’’ brazed milling head 001715 Ø 2 - 3/16’’ brazed milling head
001696 Ø 1 - 1/2’’ brazed milling head 001713 Ø 2 - 1/4’’ brazed milling head
001709 Ø 1 - 9/16’’ brazed milling head 001717 2 Ø - 5/16’’ brazed milling head
001706 Ø 1 - 5/8’’ brazed milling head 001716 Ø 2 - 3/8’’ brazed milling head
001699 Ø 1 - 11/16’’ brazed milling head 001712 Ø 2 - 1/2’’ brazed milling head
Great concentricity and
reduced effort during
machining.
Brazed milling heads cutters
Available as well
in metric sizes:
from Ø20 mm
to Ø 62 mm,
(increment of 1 mm)
Standard
Kit 181 - 8 brazed milling heads
001709 Ø 1 - 9/16’’ brazed milling head
001706 Ø 1 - 5/8’’ brazed milling head
001699 Ø 1 - 11/16’’ brazed milling head
001703 Ø 1 - 3/4’’ brazed milling head
001700 Ø 1 - 13/16’’ brazed milling head
001708 Ø 1 - 7/8’’ brazed milling head
001701 Ø 1 - 15/16’’ brazed milling head
001710 Ø 2’’ brazed milling head
580050 Allen driver 5 mm
001799 Square (.588’’x.588’’x1.56’’)
Deluxe
Kit 182 - 14 brazed milling heads
001704 Ø 1 - 3/8’’ brazed milling head
001707 Ø 1 - 7/16’’ brazed milling head
001696 Ø 1 - 1/2’’ brazed milling head
001709 Ø 1 - 9/16’’ brazed milling head
001706 Ø 1 - 5/8’’ brazed milling head
001699 Ø 1 - 11/16’’ brazed milling head
001703 Ø 1 - 3/4’’ brazed milling head
001700 Ø 1 - 13/16’’ brazed milling head
001708 Ø 1 - 7/8’’ brazed milling head
001701 Ø 1 - 15/16’’ brazed milling head
001710 Ø 2’’ brazed milling head
001711 Ø 2 - 1/16’’ brazed milling head
001714 Ø 2 - 1/8’’ brazed milling head
001715 Ø 2 - 3/16’’ brazed milling head
580050 Allen driver 5 mm
001799 Square (.588’’x.588’’x1.56’’)
37
SERDI pilots are made of Tungsten Carbide to offer durability and allow the best machining
quality and precision in the market! Guaranteed unmatched centering accuracy.
100% compatible with all competitors’ machines.
- Standard Overall Length: 7.480’’ /190mm for any type of guides.
- Optional Overall Length: 8.858’’ /225mm, 9.843» /250mm, 11.811» /300mm.
- Standard Shank Diameter: 0.375’’ /9.52mm for any type of guides.
- Optional Shank Diameter: 0.787’’ /20 mm for a better rigidity in large guides.
For any special pilots order, please contact SERDI Sales Department at 1 800 447 3790.
12 Domestic
Automotive Pilots Kit
12 Import
Automotive Pilots Kit:
8 Diesel Pilots Kit: 17 Japanese
Motorcycle Pilots Kit:
11 Harley-Davidson
Pilots Kit:
0.3106’’·(7.89mm) 0.2157’’ (5.48mm) 0.2496’’ (6.34mm) 0.1571’’ (3.99mm) 0.3106’’ (7.89mm)
0.3114’’ (7.91mm) 0.2165’’ (5.50mm) 0.2504" (6.36mm) 0.1575’’ (4.00mm) 0.3110’’ (7.90mm)
0.3122’’ (7.93mm) 0.2591’’ (6.58mm) 0.4362’’ (11.08mm) 0.1768’’ (4.49mm) 0.3118’’ (7.92mm)
0.3169’’ (8.05mm) 0.2598’’ (6.60mm) 0.4370’’ (11.10mm) 0.1772’’ (4.50mm) 0.3413’’ (8.67mm)
0.3173’’ (8.06mm) 0.2748’’ (6.98mm) 0.4516’’ (11.47mm) 0.1965’’ (4.99mm) 0.3421’’ (8.69mm)
0.3421’’ (8.69mm) 0.2756’’ (7.00mm) 0.4524’’ (11.49mm) 0.1969’’ (5.00mm) 0.3429’’ (8.71mm)
0.3425’’ (8.70mm) 0.3142’’ (7.98mm) 0.4992’’ (12.68mm) 0.2157’’ (5.48mm) 0.3760’’ (9.55mm)
0.3429’’ (8.71mm) 0.3150’’ (8.00mm) 0.5000’’ (12.70mm) 0.2161’’ (5.49mm) 0.3768’’ (9.57mm)
0.3720’’ (9.45mm) 0.3154’’ (8.01 mm) 0.2165’’ (5.50mm) 0.3776’’ (9.59mm)
0.3728’’ (9.47mm) 0.3161’’ (8.03mm) 0.2358’’ (5.99mm) 0.3783’’ (9.61mm)
0.3736’’ (9.49mm) 0.3535’’ (8.98mm) 0.2362’’ (6.00mm) 0.3791’’ (9.63mm)
0.3744’’ (9.51mm) 0.3543’’ (9.00mm) 0.2594’’ (6.59mm)
0.2598’’ (6.60mm)
0.2752’’ (6.99mm)
0.2756’’ (7.00mm)
0.3146’’ (7.99mm)
0.3150’’ (8.00mm)
*not applicable with any other offer
Carbide pilots
38
Carbide pilots chart
• stock • non-stock
mm inch mm inch mm inch mm inch mm inch mm inch mm inch mm inch mm inch mm inch
3.50 0.1378 4.41 0.1737 4.98 0.1961 5.55 0.2185 6.12 0.2410 6.69 0.2634 7.80 0.3071 8.68 0.3417 9.84 0.3874 ... ...
3.51 0.1382 4.42 0.1741 4.99 0.1965 5.56 0.2189 6.13 0.2413 6.70 0.2638 7.81 0.3075 8.69 0.3421 9.85 0.3878 12.60 0.4961
3.52 0.1386 4.43 0.1745 5.00 0.1969 5.57 0.2193 6.14 0.2417 6.71 0.2642 7.82 0.3079 8.70 0.3425 9.86 0.3882 12.61 0.4965
3.53 0.1390 4.44 0.1748 5.01 0.1972 5.58 0.2197 6.15 0.2421 6.72 0.2646 7.83 0.3083 8.71 0.3429 9.87 0.3886 12.62 0.4969
3.54 0.1394 4.45 0.1752 5.02 0.1976 5.59 0.2201 6.16 0.2425 6.73 0.2650 7.84 0.3087 8.72 0.3433 9.88 0.3890 12.63 0.4972
3.55 0.1398 4.46 0.1756 5.03 0.1980 5.60 0.2205 6.17 0.2429 6.74 0.2654 7.85 0.3091 8.73 0.3437 9.89 0.3894 12.64 0.4976
3.56 0.1402 4.47 0.1760 5.04 0.1984 5.61 0.2209 6.18 0.2433 6.75 0.2658 7.86 0.3095 8.74 0.3441 9.90 0.3898 12.65 0.4980
3.57 0.1406 4.48 0.1764 5.05 0.1988 5.62 0.2213 6.19 0.2437 6.76 0.2662 7.87 0.3099 8.75 0.3445 9.91 0.3902 12.66 0.4984
3.58 0.1409 4.49 0.1768 5.06 0.1992 5.63 0.2217 6.20 0.2441 6.77 0.2666 7.88 0.3103 8.76 0.3449 9.92 0.3906 12.67 0.4988
3.59 0.1413 4.50 0.1772 5.07 0.1996 5.64 0.2221 6.21 0.2445 6.78 0.2669 7.89 0.3107 8.77 0.3453 9.93 0.3909 12.68 0.4992
3.60 0.1417 4.51 0.1776 5.08 0.2000 5.65 0.2225 6.22 0.2449 6.79 0.2673 7.90 0.3111 8.78 0.3457 9.94 0.3913 12.69 0.4996
... ... 4.52 0.1780 5.09 0.2004 5.66 0.2228 6.23 0.2453 6.80 0.2677 7.905 0.3112 8.79 0.3461 9.95 0.3917 12.70 0.5000
3.96 0.1559 4.53 0.1784 5.10 0.2008 5.67 0.2232 6.24 0.2457 6.81 0.2681 7.91 0.3114 8.80 0.3465 9.96 0.3921 12.71 0.5004
3.97 0.1563 4.54 0.1788 5.11 0.2012 5.68 0.2236 6.25 0.2461 6.82 0.2685 7.915 0.3116 ... ... 9.97 0.3925 12.72 0.5008
3.98 0.1567 4.55 0.1791 5.12 0.2016 5.69 0.2240 6.26 0.2465 6.83 0.2689 7.92 0.3118 8.90 0.3504 9.98 0.3929 12.73 0.5012
3.99 0.1571 4.56 0.1795 5.13 0.2020 5.70 0.2244 6.27 0.2469 6.84 0.2693 7.925 0.3120 8.91 0.3508 9.99 0.3933 12.74 0.5016
4.00 0.1575 4.57 0.1799 5.14 0.2024 5.71 0.2248 6.28 0.2473 6.85 0.2697 7.93 0.3122 8.92 0.3512 10.00 0.3937 12.75 0.5020
4.01 0.1579 4.58 0.1803 5.15 0.2028 5.72 0.2252 6.29 0.2476 6.86 0.2701 7.94 0.3126 8.93 0.3516 10.01 0.3941 12.76 0.5024
4.02 0.1583 4.59 0.1807 5.16 0.2032 5.73 0.2256 6.30 0.2480 6.87 0.2705 7.945 0.3128 8.94 0.3520 10.02 0.3945 12.77
0.5028
4.03 0.1587 4.60 0.1811 5.17 0.2036 5.74 0.2260 6.31 0.2484 6.88 0.2709 7.95 0.3130 8.95 0.3524 10.03 0.3949 12.78 0.5031
4.04 0.1591 4.61 0.1815 5.18 0.2040 5.75 0.2264 6.32 0.2488 6.89 0.2713 7.96 0.3135 8.96 0.3528 10.04 0.3953 12.79 0.5035
4.05 0.1595 4.62 0.1819 5.19 0.2044 5.76 0.2268 6.33 0.2492 6.90 0.2717 7.97 0.3139 8.97 0.3531 10.05 0.3957 12.80 0.5039
4.06 0.1599 4.63 0.1823 5.20 0.2047 5.77 0.2272 6.34 0.2496 6.91 0.2721 7.98 0.3143 8.98 0.3535 10.06 0.3961 ... ...
4.07 0.1602 4.64 0.1827 5.21 0.2051 5.78 0.2276 6.35 0.2500 6.92 0.2724 7.99 0.3147 8.99 0.3539 10.07 0.3965 13.00 0.5118
4.08 0.1606 4.65 0.1831 5.22 0.2055 5.79 0.2280 6.36 0.2504 6.93 0.2728 8.00 0.3151 9.00 0.3543 10.08 0.3969 13.01 0.5122
4.09 0.1610 4.66 0.1835 5.23 0.2059 5.80 0.2284 6.37 0.2508 6.94 0.2732 8.01 0.3155 9.01 0.3547 10.09 0.3972 13.02 0.5126
4.10 0.1614 4.67 0.1839 5.24 0.2063 5.81 0.2288 6.38 0.2512 6.95 0.2736 8.02 0.3159 9.02 0.3551 10.10 0.3976 ... ...
4.11 0.1618 4.68 0.1843 5.25 0.2067 5.82 0.2291 6.39 0.2516 6.96 0.2740 8.03 0.3161 9.03 0.3555 ... ... 13.50 0.5315
4.12 0.1622 4.69 0.1847 5.26 0.2071 5.83 0.2295 6.40 0.2519 6.97 0.2744 8.04 0.3166 9.04 0.3559 11.00 0.4331 13.51 0.5319
4.13 0.1626 4.70 0.1851 5.27 0.2075 5.84 0.2299 6.41 0.2524 6.98 0.2748 8.05 0.3169 9.05 0.3563 11.01 0.4335 13.52 0.5327
4.14 0.1630 4.71 0.1855 5.28 0.2079 5.85 0.2303 6.42 0.2528 6.99 0.2752 8.06 0.3173 9.06 0.3567 11.02 0.4339 ... ...
4.15 0.1634 4.72 0.1858 5.29 0.2083 5.86 0.2307 6.43 0.2532 7.00 0.2756 8.07 0.3177 9.07 0.3571 11.03 0.4343 14.00 0.5512
4.16 0.1638 4.73 0.1862 5.30 0.2087 5.87 0.2311 6.44 0.2536 6.985 0.2750 8.08 0.3181 9.08 0.3575 11.04 0.4346 14.01 0.5516
4.17 0.1642 4.74 0.1866 5.31 0.2091 5.88 0.2315 6.45 0.2540 6.99 0.2752 8.09 0.3185 9.09 0.3579 11.05 0.4350 14.02 0.5520
4.18 0.1646 4.75 0.1870 5.32 0.2095 5.89 0.2319 6.46 0.2543 7.00 0.2756 8.10 0.3189 9.10 0.3583 11.06 0.4354 ... ...
4.19 0.1650 4.76 0.1874 5.33 0.2099 5.90 0.2323 6.47 0.2547 7.005 0.2758 ... ... ... ... 11.07 0.4358 15.00 0.5906
4.20 0.1654 4.77 0.1878 5.34 0.2102 5.91 0.2327 6.48 0.2551 7.01 0.2760 8.30 0.3268 9.40 0.3701 11.08 0.4362 15.01 0.5909
4.21 0.1658 4.78 0.1882 5.35 0.2106 5.92 0.2331 6.49 0.2555 7.02 0.2764 8.31 0.3271 9.41 0.3705 11.09 0.4366 15.02 0.5913
4.22 0.1662 4.79 0.1886 5.36 0.2110 5.93 0.2335 6.50 0.2559 7.03 0.2768 8.32 0.3275 9.42 0.3709 11.10 0.4370 ...
...
4.23 0.1666 4.80 0.1890 5.37 0.2114 5.94 0.2339 6.51 0.2563 7.04 0.2772 8.33 0.3279 9.43 0.3713 11.11 0.4374 17.00 0.6693
4.24 0.1670 4.81 0.1894 5.38 0.2118 5.95 0.2343 6.52 0.2567 7.05 0.2776 8.34 0.3283 9.44 0.3717 ... ... 17.01 0.6697
4.25 0.1674 4.82 0.1898 5.39 0.2122 5.96 0.2347 6.53 0.2571 7.06 0.2780 8.35 0.3287 9.45 0.3720 11.45 0.4508 17.02 0.6701
4.26 0.1678 4.83 0.1902 5.40 0.2126 5.97 0.2351 6.54 0.2575 7.07 0.2784 8.36 0.3291 9.46 0.3724 11.46 0.4512 ... ...
4.27 0.1682 4.84 0.1906 5.41 0.2130 5.98 0.2355 6.55 0.2579 7.08 0.2788 8.37 0.3295 9.47 0.3728 11.47 0.4516 19.00 0.7480
4.28 0.1686 4.85 0.1910 5.42 0.2134 5.99 0.2359 6.56 0.2583 7.09 0.2791 8.38 0.3299 9.48 0.3732 11.48 0.4520 19.01 0.7484
4.29 0.1690 4.86 0.1914 5.43 0.2138 6.00 0.2363 6.57 0.2587 7.10 0.2795 8.39 0.3303 9.49 0.3736 11.49 0.4524 19.02 0.7488
4.30 0.1694 4.87 0.1918 5.44 0.2142 6.01 0.2367 6.58 0.2591 7.11 0.2799 8.40 0.3307 9.50 0.3740 11.50 0.4528 ... ...
4.31 0.1697 4.88 0.1921 5.45 0.2146 6.02 0.2371 6.59 0.2594 7.12 0.2803 ... ... 9.51 0.3744 11.51 0.4531 22.00 0.8661
4.32 0.1701 4.89 0.1925 5.46 0.2150 6.03 0.2375 6.60 0.2598 7.13 0.2807 8.60 0.3386 9.52 0.3748 11.52 0.4535 22.01 0.8665
4.33 0.1705 4.90 0.1929 5.47 0.2154 6.04 0.2379 6.61 0.2602 7.14 0.2811 8.61 0.3390 9.53 0.3752 11.53 0.4539 22.02 0.8669
4.34 0.1709 4.91 0.1933 5.48 0.2157 6.05 0.2383 6.62 0.2606 7.15 0.2815 8.62 0.3394 9.54 0.3756 11.54 0.4543 ... ...
4.35 0.1713 4.92 0.1937 5.49 0.2161 6.06 0.2387 6.63 0.2610 7.16 0.2819 8.63 0.3398 9.55 0.3760 11.55 0.4547 24.00 0.9449
4.36 0.1717 4.93 0.1941 5.50 0.2165 6.07 0.2340 6.64 0.2614 7.17 0.2823 8.64 0.3402 ... ... 11.56 0.4551 24.01 0.9453
4.37 0.1721 4.94 0.1945 5.51 0.2169 6.08 0.2394 6.65 0.2319 7.18 0.2827 8.65 0.3406 9.80 0.3858 11.57 0.4555 24.02 0.9457
4.38 0.1725 4.95 0.1949 5.52 0.2173 6.09 0.2398 6.66 0.2622 7.19 0.2831 8.66 0.3409 9.81 0.3862 11.58 0.4559 ... ...
4.39 0.1729 4.96 0.1953 5.53 0.2177 6.10 0.2402 6.67 0.2626 7.20 0.2835 8.67 0.3413 9.82 0.3866 11.59 0.4563 25.00 0.9843
4.40 0.1733 4.97 0.1957 5.54 0.2181 6.11 0.2406 6.68 0.2630 ... ... 8.68 0.3417 9.83 0.3870 11.60 0.4567
39
grinding and milling range
- To mill and grind cylinder head planes and small engine blocks in aluminum or cast-iron.
- Swinging head covers most of 4 to 6 cylinder car engines.
- Automatic machining feed
SG 330 M:
- Milling plate with CBN or PCD insert
SG 330 U:
- Milling plate with CBN or PCD insert
- Grinding segment plate
- Coolant system, electric pump and settling tank
press range
- Hydraulic valve guide press
- Remove used valve guides
from the cylinder head
- Assemble or disassemble
valve springs
- Insert new seats
- Reduces operator fatigue
and costly operator errors
- Tilting xture
work bench range
- Heavy duty pneumatic
cylinder head work bench
- Assemble or disassemble
valve springs on cylinder
head of cars, trucks and
motorcycles.
- Tilting xture
Machine range
automatic single point valve seat/guide machining
- For engine prototyping and small
production
- CNC driven
- Automatic spindle speed, spindle feed
(Z axis) and carriage feed (U axis)
- Manual stroke on X and Y axis
- Spindle centering through triple air
cushion, live pilot technology
- Small size frame
- For mass production of medium size
cylinder heads
- CNC driven
- Automatic spindle speed, spindle feed
(Z axis) and carriage feed (U axis)
- Automatic stroke on X and Y axis
optional to machine each valve guide of
one or several heads (assuming they own
the same guide diameter).
- Spindle centering through triple air
cushion, live pilot technology
- Standard size frame
- For mass production of medium and
large size cylinder heads
- CNC driven
- Automatic spindle speed, spindle feed
(Z axis) and carriage feed (U axis)
- Automatic stroke on X and Y axis
optional to machine each valve guide of
one or several heads (assuming they own
the same guide diameter).
- Spindle centering through triple air
cushion, live pilot technology
- XL size frame
40
Machine range
pressure tester range
- Quick and easy clamping system allowing tests at a pressure of 0 to 10 bars
- 360° electric powered roll-over xture
- Hydraulic cradle lift
- Max head dimensions SPT 1600 L:
1350 x 395 x 300 mm
53.1 x 15.5 x 11.5 in
- Max head dimensions SPT 1600 XL:
1350 x 460 x 410 mm
53.1 x 18.1 x 16.1 in
manual form tool valve seat/guide machining
- For common automotive and
motorcycle multi-valve cylinder heads
- 80 mm (3.15’’) spindle diameter with
medium torque
- Machining seats from Ø16 to 70 mm
(0.6’’ to 2.75’’)
- Manual stroke on X and Y axis
- Spindle centering through double air
cushion
- Live pilot technology
- Small size frame
- For common automotive and
motorcycle multi-valve cylinder heads
- 80 mm (3.15’’) spindle diameter with
medium torque
- Machining seats from Ø16 to 70 mm
(0.6’’ to 2.75’’)
- Manual stroke on X and Y axis
- Spindle centering through triple air
cushion
- Live pilot technology
- Small size frame
- Highly versatile machine for micro
engine to stationary engine
- 80 mm (3.15’’) spindle diameter with
high torque
- Machining seats from Ø16 to 120 mm
(0.6’’ to 4.72’’)
- Manual stroke on X and Y axis
- Spindle centering through triple air
cushion
- Live pilot technology
- Standard size frame
- Machine for automotive, diesel and stationary engine seat
machining
- 116 mm (4.5’’) spindle diameter with massive torque
- Machining seats from Ø28 to 120 mm (1.1’’ to 4.72’’)
- Manual stroke on X and Y axis
- Spindle centering through double air cushion
- Live pilot technology
- Standard size frame
- Machine for diesel, stationary engine, railways or marine
seat machining
- 116 mm (4.5’’) spindle diameter with massive torque
- Machining seats from Ø28 to 120 mm (1.1’’ to 4.72’’)
- Manual stroke on X and Y axis
- Spindle centering through double air cushion
- Live pilot technology
- Large size frame
41
accessories range
033763 - Dual axis roll over xture
Max cylinder head
dimensions:
Length: 1050 mm - 41.3’’
Height: 170 mm - 6.7’’
Width: 300 mm - 11.8’’
. Allows quick positionning of parallel and non-parallel side heads,
even with canted valve guides.
. Set the cylinder head at the desired level and roll it over
. Sturdy clamping thanks to two large jaws
. Sphere centering handles to get a quick mount of the head
. Firm locking of the jaw’s shafts through two handles for a
perfect clamping while machining.
. Supplied with a bubble level 024298
033622 - Single axis roll over xture
Max cylinder head
dimensions:
Length: 1050 mm - 41.3’’
Height: 170 mm - 6.7’’
Width: 300 mm - 11.8’’
. Allows quick positionning of parallel and non-parallel side heads
. Sturdy clamping thanks to two large jaws
. 360° rotation to get an easy access to the whole sides of the
cylinder head for various jobs
. Firm locking of the jaw’s shafts through two handles for a perfect
clamping while machining.
. Supplied with a bubble level 024298
42
The following terms and conditions shall apply to all equipment, tooling, accessories and other products acquired from SERDI Corporation (“the Pro-
ducts”). None of these terms and conditions may be added to, modied, superseded or altered except by written instrument signed by an authorized
representative of SERDI Corporation (“SERDI”).
PRICES – All prices shown on the Sales Agreement are the purchase prices. All prices are F.O.B. SERDI’s place of shipment in the United States. All
costs incident to the installation and service of Products, except those specically included in the LIMITED WARRANTY stated below shall be rendered
by SERDI at SERDI’s then prevailing rate, plus all expenses. All merchandise shipped with customer’s own carrier will travel at customer’s own risk if not
insured. SERDI reserves the right to make changes in earlier production models. SERDI also reserves the right to discontinue the manufacture and sale
of any products at any time without previous notice. For all customers using collect account with their carriers, SERDI will charge a Handling fee to cover
the time and expenses for handling and packaging.
TAXES - Buyer must assume ultimate responsibility for payment of any state or local sales and/or use taxes which may be or may become associated
with this sale. If taxes are included in the total sales amount shown on the sales contract, the buyer acknowledges that the amount is subject to adjust-
ment based on the actual percentage(s) as assessed by the taxing authorities having jurisdiction at the place of installation or use of the product(s).
Buyer shall provide SERDI with a tax exemption certicate acceptable to the taxing authorities.
TITLE RETENTION - Unless credit to Buyer has been expressly approved in writing, SERDI shall not be obligated to ship the Products until SERDI
receives full payment (if check or negotiable instrument, until the check is honored or payment received by SERDI’s bank), including shipping and
handling. Title to the Products shall remain SERDI’s until full payment has been received. Until title passes to Buyer, the Products shall be kept at the lo-
cation to which they were originally shipped. Failure to make any payment when due; shall give SERDI the option, without liability and without limitation,
to take possession of and recover the Products without notice. Buyer shall pay to SERDI a service charge on any and all late payments at a rate equal
to eighteen (18%) percent per annum or the maximum rate permissible under applicable law, whichever is lower. Buyer agrees to pay all costs, including
attorney or collection agency fees, associated with collection or enforcement of this agreement.
CONDITION OF ACCEPTANCE AND MINIMUM ORDER – All orders are subject to acceptance by SERDI and SERDI’s ability to ship. No order will be
processed without a receipt of a written purchase order bearing a purchase order number. Product specications, design, prices, discounts and terms
are subject to change without notice. All orders will be invoiced at prices in effect at the time of shipment. A service charge is subject to be added to any
orders at the sole discretion of SERDI.
CATALOG ERRORS – Although all information in our catalog and brochures have been carefully checked for accuracy, errors and omissions occasio-
nally occur and therefore are subject to correction. We regret any inconvenience.
CREDIT AND SECURITY AGREEMENT - No credit is extended unless previously approved in writing by SERDI. Buyer hereby grants to SERDI a secu-
rity interest in the Products which have been purchased until full payment is received by SERDI. Buyer will execute a recordable nancing statement
indicating SERDI’s security interest in the Products. Failure to pay the purchase price of the Products when due shall give SERDI the option, without
liability and without limitation, to take possession of the Products without notice, sell the Products at public or private sale at which SERDI may be a
purchaser, apply the proceeds after deducting expenses and liens and pay the surplus, if any, to Buyer.
CHANGES - Buyer may make written requests for changes in specications. SERDI is not obligated to accept any such request. If such a request is
accepted and causes an increase in the cost or the time required for the manufacture of the Product, SERDI may adjust the purchase price and/or deli-
very schedule, and the General Conditions of Sale may be modied accordingly.
LIMITED WARRANTY - The products are warranted upon delivery to conform to their published specications and to be free from defects in material
and workmanship under normal use for a period of one year from shipment. Should a product not be as warranted, SERDI’s sole obligation shall be, at
its option, to repair, correct or replace the product or to refund the amounts paid for the Product upon its return to a location designated by SERDI. No
warranty shall extend to rapid wear Products (including tooling) or to Products which have been subject to misuse (including any use contrary to SERDI
instructions), neglect, accident (including during shipment), improper handling or installation, or subject to any modication, repair or service not certied
by SERDI. SERDI MAKES NO OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. SERDI shall not be liable for any consequential, direct or indirect damages or
for any other injury or loss. Buyer waives any right, beyond the foregoing warranty, to make a claim against SERDI. No warranty is provided for any
Products not paid for in full.
RETURN MERCHANDISE POLICY - Merchandise cannot be returned to SERDI without prior approval. Customer must contact the Order Department to
get approval and to be issued a Return Goods Authorization number (RGA #). Merchandise authorized for return must be returned prepaid. If merchan-
dise is returned with shipping charges collect, the actual amount of these charges may be deducted from any credit which may be due the customer.
The RGA # assigned by the Order Department should be written on the shipping label and must appear on a copy of the invoice(s) covering the original
shipment. This invoice copy must be included in the box with the parts. Shipment must contain ONLY those items on the RGA as approved for return.
Merchandise must be received within 10 days of the date of RGA or the RGA will be canceled. All returned merchandise will be subject to a 20% restoc-
king fee. Parts / tooling over 30 days old are considered as customer property and can not be returned. Company credits are non-refundable. Service
and installation charges are non-refundable. Special order items and machines are non-refundable. C.O.D. returns will not be accepted. No return of
altered or etched items. Custom orders and machines cannot be cancelled once processed; sales are nal: no return, exchange or refund. Any credit
granted by SERDI is void if not used within one (1) year of credit issuance.
The issuance of a RGA DOES NOT guarantee credit - it is only authorization for the return of the goods. Credit for return merchandise is at the sole
discretion of SERDI. Credit will be issued only after inspection of returned goods.
RISK OF LOSS - All risk of loss or damage shall pass to Buyer when the Products are placed in the possession of the rst carrier at SERDI’s place of
shipment. Prepayment of freight or insurance shall not convert the terms to F.O.B. destination.
GENERAL - The exclusive venue and jurisdiction for any dispute between Buyer and SERDI shall be in the State or Federal courts at the location of
SERDI’s ofce in the State of Georgia and Georgia law shall govern all such disputes. Buyer shall be subject to the personal jurisdiction of said courts.
These terms and conditions shall be binding on the heirs, assigns, executors and administrators of Buyer and shall inure to the benet of SERDI and its
successors and assigns.
NOTICE - By signature on the accompanying Sales Agreement or by acceptance and use of product(s) shipped in fulllment of phone, fax or written
purchase orders, the buyer acknowledges receipt and acceptance of all of the General Conditions of Sale contained here-in.
general conditions of sale
43
seat and guide machines
Applications:
Heavy diesel:
Aviation
Stationary engines:
Marine:
Racing:
Motorcycle:
Automotive:
Uncontractual document. SERDI reserves the right to make changes in design, specications,
and descriptions without notice.
Ref: 035384_5 03/19
SERDI CORP.
1526 Litton Drive
Stone mountain
Georgia 30083
USA
1-800-447-3790 (toll free)
Fax: (770) 493 83 23
www.serdi.com
Email: [email protected]
