TOOLING FOR VALVE SEATS

seat and guide machines

www.tendtool.com

[email protected]

Custom services phone：0086-13909244118

Instagram：tendtool machine

Table of contents

Tooling for seat and guide machines 4

Tool holders 8

Original style —8

SCS / TRI —9

Spare parts —10

Special —10

Cutting bit holders 11

Original tooling —11

TRI —15

Cutting bits 18

45° —18

30° —22

37.5° —25

straight seat angles —26

performance seat angles —28

sale —34

Installation / removal of seat and guides 35

Indexable milling heads cutters 36

Brazed milling heads cutters 37

Carbide pilots 38

Machine range 40

export@tendtool.com 0081-13909244118

Tooling for seat and guide machines

China profile cutters are designed on a modern CAD system, and then produced according to exact seat specification

on a CNC profile grinder. Every single cutter is quality controlled on state-of-art equipment before delivery.

Original style

Standard Cutting Bit for almost any conventional valve seat profil

AL10

AL11

AL12 AL13

Counterboring Cutting Bit

for valve seat counterbore

machining

For wide seat profile machining

on large diameter valve seat

For wide seat profile machining

on smaller diameter valve seat

For small valve seat diameter

such as motorcycle heads with

a deep seat

New generation style

Standard Cutting Bits

for almost any small

valve seat profil

(E1 ts S2700 - E2 ts

S2710/S2711/S2731)

Cutting bit for wide seat profile

machining

(Fits S2710/S2711/S2730)

Counterboring cutting bit for small

diameter seat pocket machining

(Fits S2700)

Counterboring cutting bit for valve

seat machining (Fits S2710/S2711/

S2731)

0° Rake Cutting Angle (Negative):

The bit is perpendicular to the cutting surface (as the SERDI

Original Style Tooling). The 0 ° angle tooling can cut different

hardness seats (soft & medium) up to 45 Rockwell. The cutting

parameters for the 0 ° angle tooling can remain the same as the

SERDI Original Style Tooling but with an easier cut.

8° Rake Cutting Angle (Positive):

The bit is 8° from the perpendicular to the cutting surface.

The 8 ° angle tooling is especially design to cut hard seats 45

Rockwell and up. The cutting bit is more aggressive on the seat

so the vertical pressure decrease and run at a lower Rpm. SERDI

recommends using this type of tooling only on hard seats (Risk of

vibration and shattering on soft seats).

TECHNICAL NOTES :

- Do not use a 0° bit on a 8° Bit Holder or the opposite.

- If used as above mentioned, the back of the bit will touch

the seat when machining or the bit will be too fragile in the

second case.

- The original bit sharpener can be used with the New

Style Cutting Bits using adapter tooling bracket

(Reference : 021960)

[email protected] 0086-13909244118

original cutting system tooling range for seats machining

Capacity (seat

Ø)

Ø18 to Ø30 mm

Ø0.70’’ to Ø 1.180’’

Ø28 to Ø42 mm

Ø1.100’’ to Ø1.650’’

Ø40 to Ø58mm

Ø1.570’’ to Ø2.280’’

Ø40 to Ø60 mm

Ø1.570’’ to Ø2.360’’

Ø58 to Ø80 mm

Ø2.280’’ to Ø3.150’’

Tool-holder

Cutting bit

holder

Pilot

Cutting bit

A1 AL10

AL11

AL12

AL13 B1 B2 B4

S5100

Ref 010021

S5300

Ref 404079

S2000

Ref 303390

S2001

Ref 303391

S2002

Ref 303392

CL type pilot

Ø 9.52 mm - 3/8’’ shank

Ø 3.5 to Ø 14 mm

190 mm - 7.5’’ length

S2003

Ref 303393

S2004

Ref 303394

[email protected] 0086-13909244118

Cutting system «SCS» tooling range for seats machining

Capacity (seat Ø) Ø16 to Ø25 mm

Ø0.630’’ to Ø 0.980’’

Ø20 to Ø30 mm

Ø0.787’’ to Ø1.181’’

Ø28 to Ø40mm

Ø1.102’’ to Ø1.570’’

Ø35 to Ø70 mm

Ø1.380’’ to Ø2.760’’

Ø60 to Ø120 mm

Ø2.360’’ to Ø4.720’’

Tool-holder

Cutting bit

holder

Pilot

Cutting bit

S5700

Ref 019583

S5710

Ref 014154

S5731

Ref 020762

S2700

0° rake angle

Ref 921228

S2710

0° rake angle

Ref 919409

S2710

8° rake angle

Ref 019409

S2711

0° rake angle

Ref 918768

S2711

8° rake angle

Ref 018768

S2730

0° rake angle

Ref 919513

S2730

8° rake angle

Ref 019513

E1/D1

8° draft angle

Ref 0xxxxx

D2/E2/E3

8° draft angle

Ref 9xxxxx

D2/E2/E3

14° draft angle

Ref 0xxxxx

D2/E2/E3

14° draft angle

Ref 0xxxxx

D2/E2/E3

8° draft angle

Ref 9xxxxx

CL type pilot

Ø 9.52 mm - 3/8’’ shank

190 mm - 7.5’’ length

E type pilot

Ø 20 mm - .78’’ shank

CL type pilot

Ø 9.52 mm - 3/8’’ shank

190 mm - 7.5’’ length

[email protected] 0086-13909244118

cutting system «SCS» tooling range for seats machining

Machining

capacity

Ø16 to Ø25 mm

Ø0.630’’ to Ø 0.980’’

Ø20 to Ø40 mm

Ø0.787’’ to Ø1.181’’

Ø35 to Ø70mm

Ø1.102’’ to Ø1.570’’

Ø60 to Ø120 mm

Ø2.360’’ to Ø4.720’’

Tool-holder

Cutting bit

holder

Pilot

Cutting bit

S2700-TRI-0

Ref 035777

S2700-TRI-10

Ref 035778

S2700TRI-20

Ref 035779

S2700 TRI-30

Ref 035780

S2700 TRI-45

Ref 035781

S2700-TRI-60

Ref 035782

S2711-TRI-0

Ref 034665

S2711-TRI-10

Ref 034667

S2711-TRI-20

Ref 034669

S2711-TRI-30

Ref 034671

S2711-TRI-45

Ref 034673

S2711-TRI-60

Ref 034675

S2730-TRI-0

Ref 034664

S2730-TRI-10

Ref 034666

S2730-TRI-20

Ref 034668

S2730-TRI-30

Ref 034670

S2730-TRI-45

Ref 034672

S2730

-TRI-60

Ref 034674

S5700

Ref 019583

S5710

Ref 014154

S5731

Ref 020762

CL type pilot

Ø 9.52 mm - 3/8’’ shank

190 mm - 7.5’’ length

E type pilot

Ø 20 mm - .78’’ shank

CL type pilot

Ø 9.52 mm - 3/8’’ shank

190 mm - 7.5’’ length

FULL FACE

CBN BIT

Ref 031742

FULL FACE

CBN BIT

Ref 033223

[email protected] 0086-13909244118

Tool holders

Original style

5100

753313 Pilot tightening screw (HC M5x8) x 1

753313 Tightening screw for cutting bit holder (HC M5x8) x 2

Only for cutting bit holder #2000, #2001, #2002

For the entire range of France and China seat and guide

machines

Accomodates any pilot size with Ø 9.52mm - 3/8’’ shank

Accomodates the entire range of milling cutters for valve seat

pocket counterboring

5300

753313 Pilot tightening screw (HC M5x8) x 1

753313 Tightening screw for cutting bit holder (HC M5x8) x 2

Only for cutting bit holder #2003, #2004

For the entire range of France and China seat and guide

machines

Accomodates any pilot size with Ø 9.52mm - 3/8’’ shank

[email protected] 0086-13909244118

5700

753323

753313

Pilot tightening screw (HC M5x10) x 1

Tightning screw for cutting bit holder (HC M5x8) x 2

Only for cutting bit holder #2700

For the entire range of France and China seat and guide

machines Accomodates any pilot size with Ø 9.52mm - 3/8’’

shank

5710

753332

753313

Pilot tightening screw (HC M5x12) x 1

Tightening screw for cutting bit holder (HC M5x8) x 4

Only for cutting bit holder #2700, #2710 and #2711 For the

entire range of France

and China seat and guide machines

Accomodates any pilot size with Ø 9.52mm - 3/8’’ shank

Tool holders

Special

32082501015 SERDI 3200

Adaptor IS0 30 (fits in France and China spindles) to Morse

Taper

582501 T8 screw driver

TheTENDTOOL standard

Torx T8 Screw driver for

original style tooling

757010 T8 torx screw

The TENDTOOL standard

Torx Screw for original

style tooling

Cutting bit holders

Spare parts

012205 T15 screw driver

The TENDTOOL standard

Torx T15 Screw driver

for new style tooling

SCS

021144 T15 torx screw

The TENDTOOL standard

Torx Screw for new style

tooling SCS

3200

012205 T15 screw driver

5730

753350

753313

Pilot tightening screw (HC M5x20) x 1

Tightening screw for cutting bit holder (HC M5x8) x 6

Only for cutting bit holder #2730

For the entire range of France and China seat and guide

machines, except SERDI 3.0, SERDI 1.1 and SERDI 3.5

Accomodates any pilot size with Ø 20mm - 0.787’’ shan

Cutting bit holders

Original tooling

753220

757010

2000

Adjusting diameter screw (HC M4x10) x 1

Torx screw T8 (HC M3x10) x 1

Only for tool holder #5100

Accomodates carbide cutting bit A and B type

Ø 18 to

30 mm

Ø 0.710’’

to 1.180’’

753230

757010

2001

Adjusting diameter screw (HC M4x12) x 1

Torx screw T8 (HC M3x10) x 1

Only for tool holder #5100

Accomodates carbide cutting bit A and B type

Ø 28 to

42 mm

1.100’’

to 1.65’’

753240

757010

2002

Adjusting diameter screw (HC M4x16) x 1

Torx screw T8 (HC M3x10) x 1

Only for tool holder #5100

Accomodates carbide cutting bit A and B type

Ø 40 to

58 mm

Ø 1.57’’

to 2.28’’

753415

757010

2003

Adjusting diameter screw (HC M6x16) x 1

Torx screw T8 (HC M3x10) x 1

Only for tool holder #5300

Accomodates carbide cutting bit A and B type

Ø 40 to

60 mm

Ø 1.57’’

to 2.36’’

753425

757010

2004

Adjusting diameter screw (HC M6x20) x 1

Torx screw T8 (HC M3x10) x 1

Only for tool holder #5300

Accomodates carbide cutting bit A and B type

Ø 58 to

80 mm

Ø 2.28’’

to 3.15’’

export@tendtool.com 0081-13909244118

Cutting bit holders

SCS

T2700

753340 Adjusting diameter screw (HC M5x16) x 1

021145 Torx screw T15 (HC M3.5x9.5) x 1

Only for tool holder #5700 and #5710

Negative 0° rake angle: accomodates carbide

cutting bits D1 part #0XXXX (E2 for particular

applications only)

Ø 16 to 30 mm

Ø 0.630’’ to

1.181’’

T 2710 - 0°

753350 Adjusting diameter screw (HC M5x20) x 1

021144 Torx screw T15 (HC M3.5x11) x 1

Only for tool holder #5710

Negative 0° rake angle: accomodates carbide

cutting bits E2, E3, D2 part #9xxxxx

Ø 28 to 40 mm

Ø 1.102’’ to 1.570’’

Cutting bit holders

SCS

T2711 - 0°

753370 Adjusting diameter screw (HC M5x30) x 1

021144 Torx screw T15 (HC M3.5x11) x 1

Only for tool holder #5710

Negative 0° rake angle: accomodates carbide

cutting bits E2, E3, D2 part #9xxxxx

018768 SERDI 2711 - 8°

Ø 35 to 70 mm

Ø 1.38’’ to 2.76’’

753370 Adjusting diameter screw (HC M5x30) x 1

021144 Torx screw T15 (HC M3.5x11) x 1

Only for tool holder #5710

Positive 8° rake angle: accomodates carbide

cutting bits E2, E3, D2 part #0xxxxx

2730 - 0°

753370 Pilot tightening screw (HC M5x30) x 1

021144 Torx screw T15 (HC M3.5x11) x 1

Only for tool holder #5731

Negative 0° rake angle: accomodates carbide

cutting bits E2, E3, D2 part #9xxxxx

2730 - 8°

Ø 60 to 120 mm

Ø 2.36’’ to 4.72’’

753370 Pilot tightening screw (HC M5x30) x 1

021144 Torx screw T15 (HC M3.5x11) x 1

Only for tool holder #5731

Positive 8° rake angle: accomodates carbide

cutting bits E2, E3, D2 part #0xxxxx

export@tendtool.com 0081-13909244118

Cutting bit holders

TRI

035777 S2700 TRI-0

753340 Adjusting diameter screw (HC M5x16) x 1

031738 Bit clamp + screw (CHC M3)

For tool holder #5700 and #5710

0° single angle tip holder for triangular cutting bit 6 mm

edges 031742 (order separately).

035778 S2730 TRI-10

753340 Adjusting diameter screw (HC M5x16) x 1

031738 Bit clamp + screw (CHC M3)

For tool holder #5700 and #5710

10° single angle tip holder for triangular cutting bit 6 mm

edges 031742 (order separately).

035779 S2730 TRI-20

753340 Adjusting diameter screw (HC M5x16) x 1

031738 Bit clamp + screw (CHC M3)

For tool holder #5700 and #5710

20° single angle tip holder for triangular cutting bit 6 mm

edges 031742 (order separately).

035780 S2730 TRI-30

753340 Adjusting diameter screw (HC M5x16) x 1

031738 Bit clamp + screw (CHC M3)

For tool holder #5700 and #5710

30° single angle tip holder for triangular cutting bit 6 mm

edges 031742 (order separately).

035781 S2730 TRI-45

753340 Adjusting diameter screw (HC M5x16) x 1

031738 Bit clamp + screw (CHC M3)

For tool holder #5700 and #5710

45° single angle tip holder for triangular cutting bit 6 mm

edges 031742 (order separately).

035782 S2730 TRI-60

753340 Adjusting diameter screw (HC M5x16) x 1

031738 Bit clamp + screw (CHC M3)

For tool holder #5700 and #5710

60° single angle tip holder for triangular cutting bit 6 mm

edges 031742 (order separately).

Ø with S5700

- mini Ø16 mm - 0.630’’

- maxi Ø25 mm - 0.980’’

Ø with S5710

- mini Ø20 mm

- maxi Ø40 mm

[email protected] 0086-13909244118

Ø with S5710

- mini Ø35 mm

- maxi Ø70 mm

Cutting bit holders

TRI

034665 S2711 TRI-0

753370 Adjusting diameter screw (HC M5x30) x 1

032263 Bit clamp + screw (CHC M4)

Only for tool holder #5710

0° single angle tip holder for triangular cutting bit 11 mm

edges 033223 (order separately).

034667 S2711 TRI-10

753370 Adjusting diameter screw (HC M5x30) x 1

032263 Bit clamp + screw (CHC M4)

Only for tool holder #5710

10° single angle tip holder for triangular cutting bit 11

mm edges 033223 (order separately).

034669 S2711 TRI-20

753370 Adjusting diameter screw (HC M5x30) x 1

032263 Bit clamp + screw (CHC M4)

Only for tool holder #5710

20° single angle tip holder for triangular cutting bit 11

mm edges 033223 (order separately).

034671 S2711 TRI-30

753370 Adjusting diameter screw (HC M5x30) x 1

032263 Bit clamp + screw (CHC M4)

Only for tool holder #5710

30° single angle tip holder for triangular cutting bit 11

mm edges 033223 (order separately).

034673 S2711 TRI-45

753370 Adjusting diameter screw (HC M5x30) x 1

032263 Bit clamp + screw (CHC M4)

Only for tool holder #5710

45° single angle tip holder for triangular cutting bit 11

mm edges 033223 (order separately).

034675 S2711 TRI-60

753370 Adjusting diameter screw (HC M5x30) x 1

032263 Bit clamp + screw (CHC M4)

Only for tool holder #5710

60° single angle tip holder for triangular cutting bit 11

mm edges 033223 (order separately).

[email protected] 008-13909244118

Cutting bit holders

TRI

034664 S2730 TRI-0

753370 Adjusting diameter screw (HC M5x30) x 1

032263 Bit clamp + screw (CHC M4)

Only for tool holder #5731

0° single angle tip holder for triangular cutting bit 11 mm

edges 033223 (order separately).

034666 S2730 TRI-10

753370 Adjusting diameter screw (HC M5x30) x 1

032263 Bit clamp + screw (CHC M4)

Only for tool holder #5731

10° single angle tip holder for triangular cutting bit 11

mm edges 033223 (order separately).

034668 S2730 TRI-20

753370 Adjusting diameter screw (HC M5x30) x 1

032263 Bit clamp + screw (CHC M4)

Only for tool holder #5731

20° single angle tip holder for triangular cutting bit 11

mm edges 033223 (order separately).

034670 S2730 TRI-30

753370 Adjusting diameter screw (HC M5x30) x 1

032263 Bit clamp + screw (CHC M4)

Only for tool holder #5731

30° single angle tip holder for triangular cutting bit 11

mm edges 033223 (order separately).

034672 S2730 TRI-45

753370 Adjusting diameter screw (HC M5x30) x 1

032263 Bit clamp + screw (CHC M4)

Only for tool holder #5731

45° single angle tip holder for triangular cutting bit 11

mm edges 033223 (order separately).

034674 S2730 TRI-60

753370 Adjusting diameter screw (HC M5x30) x 1

032263 Bit clamp + screw (CHC M4)

Only for tool holder #5731

60° single angle tip holder for triangular cutting bit 11

mm edges 033223 (order separately).

Ø with S5731

- mini Ø60 mm

- maxi Ø120 mm

Cutting bits 45°

1.2 mm (.0472’’)

30°- 1.39 mm (.0547’’)

45°- 1.00 mm (.0393’’)

60°

022736 ADS001-E1

922735 ADN001-E2

022735 ADP001-E2

000612 SC001-A1

2 mm (.0787’’)

30°- 2.31 mm (.0909’’)

45°- 1.00 mm (.0393’’)

60°

022728 ADS002-E1

922833 ADN002-E2

022833 ADP002-E2

006351 SC002-A1

1.2 mm (.0472’’)

30°- 1.39 mm (.0547’’)

45°- 1.30 mm (.0511’’)

60°

022838 ADS003-E1

922839 ADN003-E2

022839 ADP003-E2

012735 SC003-A1

1.6 mm (.0629’’)

30°- 1.85 mm (.073’’)

45°- 1.30 mm (.0511’’)

60°

022840 ADS004-E1

922841 ADN004-E2

022841 ADP004-E2

021856 SC004-A1

2 mm (.0787’’)

37°- 2.50 mm (.0984’’)

45°- 1.30 mm (.0511’’)

52°

022844 ADS005-E1

922845 ADN005-E2

022845 ADP005-E2

000691 SC005-A1

2 mm (.0787’’)

37°- 2.31 mm (.0909’’)

45°- 1.30 mm (.0511’’)

60°

022842 ADS006-E1

922843 ADN006-E2

022843 ADP006-E2

000693 SC006-A1

1.8 mm (.0708’’)

37°- 2.25 mm (.0885’’)

45°- 1.50 mm (.059’’)

52°

022862 ADS007-E1

922861 ADN007-E2

022861 ADP007-E2

000764 SC007-A1

1.8 mm (.0708’’)

15°- 1.86 mm (.0732’’)

45°- 1.50 mm (.059’’)

60°

022858 ADS008-E1

922857 ADN008-E2

022857 ADP008-E2

000768 SC008-A1

1.8 mm (.0708’’)

30°- 2.08 mm (.0818’’)

45°- 1.50 mm (.059’’)

52°

022860 ADS009-E1

922859 ADN009-E2

022859 ADP009-E2

012736 SC009-A1

Cutting bits 45°

2 mm (.0787’’)

30°- 2.31 mm (.0909’’)

45°- 1.50 mm (.059’’)

60°

022864 ADS010-E1

922863 ADN010-E2

022863 ADP010-E2

000778 SC010-A1

3 mm (.1181’’)

30°- 3.46 mm (.1362’’)

45°- 1.50 mm (.059’’)

60°

025361 ADS011-E1

927018 ADN011-E2

027018 ADP011-E2

009476 SC011-A1

1.2 mm (.0472’’)

30°- 1.39 mm (.547’’)

45°- 1.60 mm (.063’’)

52°

025344 ADS012-E1

927011 ADN012-E2

027011 ADP012-E2

000791 SC012-A1

1.2 mm (.0472’’)

30°- 1.39 mm (.0547’’)

45°- 1.60 mm (.063’’)

60°

022868 ADS013-E1

922867 ADN013-E2

022867 ADP013-E2

000792 SC013-A1

1.4 mm (.0551’’)

30°- 1.61 mm (.0633’’)

45°- 1.60 mm (.063’’)

60°

022872 ADS014-E1

922871 ADN014-E2

022871 ADP014-E2

019175 SC014-A1

1.6 mm (.0629’’)

15°- 1.66 mm (.0653’’)

45°- 1.60 mm (.063’’)

60°

022874 ADS015-E1

922873 ADN015-E2

022873 ADP015-E2

019176 SC015-A1

1.6 mm (.063’’)

30°- 1.85 mm (.0728’’)

45°- 1.60 mm (.063’’)

52°

025345 ADS016-E1

927127 ADN016-E2

027127 ADP016-E2

025215 SC016-A1

1.6 mm (.063’’)

30°- 1.85 mm (.0728’’)

45°- 1.60 mm (.063’’)

60°

022870 ADS017-E1

922869 ADN017-E2

022869 ADP017-E2

000796 SC017-A1

1.8 mm (.071’’)

30°- 2.08 mm (.0818’’)

45°- 1.60 mm (.063’’)

52°

022878 ADS018-E1

922877 ADN018-E2

022877 ADP018-E2

000798 SC018-A1

export@tendtool.com 0081-13909244118

Cutting bits 45°

2 mm (.0787’’)

15°- 2.08 mm (.0818’’)

45°- 1.60 mm (.0629’’)

60°

022876 ADS019-E1

922875 ADN019-E2

022875 ADP019-E2

000801 SC019-A1

2 mm (.0787’’)

30°- 2.3 mm (.0905’’)

45°- 1.60 mm (.0629’’)

52°

022881 ADS020-E1

922882 ADN020-E2

022882 ADP020-E2

012831 SC020-A1

2 mm (.0787’’)

30°- 2.3 mm (.0905’’)

45°- 1.60 mm (.0629’’)

60°

022880 ADS021-E1

922879 ADN021-E2

022879 ADP021-E2

000802 SC021-A1

3 mm (.1181’’)

30°- 3.46 mm (.1362’’)

45°- 1.60 mm (.063’’)

60°

025349 ADS022-E1

925348 ADN022-E2

025348 ADP022-E2

024914 SC022-A1

3 mm (.1181’’)

30°- 3.46 mm (.1362’’)

45°- 1.80 mm (.0708’’)

60°

025351 ADS023-E1

925350 ADN023-E2

025350 ADP023-E2

025069 SC023-A1

1.2 mm (.0472’’)

30°- 1.39 mm (.0547’’)

45°- 1.90 mm (.0748’’)

52°

025352 ADS024-E1

927094 ADN024-E2

027094 ADP024-E2

024900 SC024-A1

1.2 mm (.0472’’)

30°- 1.39 mm (.0547’’)

45°- 1.90 mm (.0748’’)

60°

022892 ADS025-E1

922891 ADN025-E2

022891 ADP025-E2

000833 SC025-A1

1.6 mm (.0.63’’)

30°- 1.85 mm (.0728’’)

45°- 1.90 mm (.0748’’)

60°

022898 ADS026-E1

922897 ADN026-E2

022897 ADP026-E2

000841 SC026-A1

1.8 mm (.0.708’’)

30°- 2.08 mm (.0818’’)

45°- 1.90 mm (.0748’’)

52°

022912 ADS027-E1

922899 ADN027-E2

022899 ADP027-E2

000851 SC027-A1

Cutting bits 45°

2 mm (.0787’’)

30°- 2.31 mm (.0909’’)

45°- 1.90 mm (.0748’’)

52°

022916 ADS028-E1

922915 ADN028-E2

022915 ADP028-E2

019177 SC028-A1

2 mm (.0787’’)

30°- 2.31 mm (.0909’’)

45°- 1.90 mm (.0748’’)

60°

022914 ADS029-E1

922913 ADN029-E2

022913 ADP029-E2

000854 SC029-A1

1.6 mm (.0629’’)

30°- 1.85 mm (.0728’’)

45°- 2 mm (.0787’’)

70°

025356 ADS030-E1

925355 ADN030-E2

025355 ADP030-E2

023384 SC030-A1

1.6 mm (.0629’’)

30°- 1.85 mm (.0728’’)

45°- 2 mm (.0787’’)

75°

023669 ADS031-E1

925357 ADN031-E2

025357 ADP031-E2

023385 SC031-A1

1.4 mm (.0551’’)

30°- 1.62 mm (.0637’’)

45°- 2.2 mm (.0866’’)

60°

025359 ADS032-E1

925358 ADN032-E2

025358 ADP032-E2

000962 SC032-A1

2 mm (.0787’’)

30°- 2.31 mm (.0909’’)

45°- 2.3 mm (.0905’’)

60°

025360 ADS033-E1

927100 ADN033-E2

027100 ADP033-E2

000997 SC033-A1

2 mm (.0787’’)

30°- 2.31 mm (.0909’’)

45°- 2.5 mm (.0984’’)

60°

022942 ADS034-E1

922937 ADN034-E2

022937 ADP034-E2

012832 SC034-A1

1.6 mm (.0629’’)

35°- 1.95 mm (.0767’’)

45°- 1 mm (.0393’’)

52°

025341 ADS035-E1

925340 ADN035-E2

025340 ADP035-E2

025006 SC035-A1

1.6 mm (.0629’’)

35°- 1.95 mm (.0767’’)

45°- 1 mm (.0393’’)

60°

025343 ADS036-E1

925342 ADN036-E2

025342 ADP036-E2

000621 SC036-A1

export@tendtool.com 0081-13909244118

Cutting bits 45°

1.4 mm (.0551’’)

30°- 1.62 mm (.0637’’)

45°- 1.5 mm (.0590’’)

60°

022852 ADS037-E1

922851 ADN037-E2

022851 ADP037-E2

008605 SC037-A1

2 mm (.0787’’)

35°- 2.44 mm (.0960’’)

45°- 1.6 mm (.0629’’)

55°

025347 ADS038-E1

925346 ADN038-E2

025346 ADP038-E2

023445 SC038-A1

2 mm (.0787’’)

35°- 2.44 mm (.0960’’)

45°- 1.9 mm (.0748’’)

55°

025354 ADS039-E1

925353 ADN039-E2

025353 ADP039-E2

023457 SC039-A1

Cutting bits 30°

1 mm (.0393’’)

15°- 1.04 mm (.0409’’)

30°- 1.3 mm (.0511’’)

45°

022666 ADS300-E1

922665 ADN300-E2

022665 ADP300-E2

019162 SC300-A1

2 mm (.0787’’)

15°- 2.07 mm (.0814’’)

30°- 1.3 mm (.0511’’)

45°

022668 ADS301-E1

922667 ADN301-E2

022667 ADP301-E2

011648 SC301-A1

2 mm (.0787’’)

15°- 2.07 mm (.0814’’)

30°- 1.3 mm (.0511’’)

60°

022670 ADS302-E1

922669 ADN302-E2

022669 ADP302-E2

019163 SC302-A1

1.4 mm (.0551’’)

15°- 1.45 mm (.0570’’)

30°- 1.5 mm (.0590’’)

45°

022676 ADS303-E1

922673 ADN303-E2

022673 ADP303-E2

019164 SC303-A1

1.8 mm (.0708’’)

15°- 1.86 mm (.0732’’)

30°- 1.5 mm (.0590’’)

45°

025367 ADS304-E1

925188 ADN304-E2

025188 ADP304-E2

000756 SC304-A1

2 mm (.0787’’)

15°- 2.07 mm (.0814’’)

30°- 1.5 mm (.0590’’)

60°

025368 ADS305-E1

927114 ADN305-E2

027114 ADP305-E2

012367 SC305-A1

Cutting bits 30°

1.2 mm (.0472’’)

15°- 1.24 mm (.0488’’)

30°- 1.6 mm (.063’’)

45°

022688 ADS306-E1

922679 ADN306-E2

022679 ADP306-E2

019166 SC306-A1

1.8 mm (.0708’’)

15°- 1.86 mm (.0732’’)

30°- 1.6 mm (.0629’’)

45°

025369 ADS307-E1

927044 ADN307-E2

027044 ADP307-E2

024903 SC307-A1

1.8 mm (.0708’’)

15°- 1.86 mm (.0732’’)

30°- 1.6 mm (.0629’’)

52°

022692 ADS308-E1

922687 ADN308-E2

022687 ADP308-E2

000797 SC308-A1

2 mm (.0787’’)

15°- 2.07 mm (.0814’’)

30°- 1.6 mm (.0629’’)

45°

022694 ADS309-E1

922689 ADN309-E2

022689 ADP309-E2

000800 SC309-A1

2 mm (.0787’’)

15°- 2.07 mm (.0814’’)

30°- 1.6 mm (.0629’’)

60°

022696 ADS310-E1

922691 ADN310-E2

022691 ADP310-E2

019167 SC310-A1

2.2 mm (.0866’’)

15°- 2.28 mm (.0897’’)

30°- 1.6 mm (.0629’’)

60°

025371 ADS311-E1

925370 ADN311-E2

025370 ADP311-E2

000279 SC311-A1

2 mm (.0787’’)

15°- 2.07 mm (.0814’’)

30°- 1.8 mm (.0708’’)

45°

022700 ADS312-E1

922695 ADN312-E2

022695 ADP312-E2

019168 SC312-A1

1 mm (.0393’’)

15°- 1.04 mm (.0409’’)

30°- 1.9 mm (.0748’’)

45°

022702 ADS313-E1

922697 ADN313-E2

022697 ADP313-E2

000824 SC313-A1

2 mm (.0787’’)

15°- 2.07 mm (.0814’’)

30°- 1.9 mm (.0748’’)

60°

022708 ADS314-E1

922703 ADN314-E2

022703 ADP314-E2

006256 SC314-A1

export@tendtool.com 0081-13909244118

Cutting bits 30°

1.2 mm (.0472’’)

15°- 1.24 mm (.0488’’)

30°- 2 mm (.0787’’)

45°

022710 ADS315-E1

922705 ADN315-E2

022705 ADP315-E2

012833 SC315-A1

2 mm (.0787’’)

15°- 2.07 mm (.0814’’)

30°- 2 mm (.0787’’)

45°

022716 ADS316-E1

922353 ADN316-E2

022353 ADP316-E2

019169 SC316-A1

2 mm (.0787’’)

15°- 2.07 mm (.0814’’)

30°- 2.2 mm (.087’’)

60°

022720 ADS317-E1

922711 ADN317-E2

022711 ADP317-E2

019170 SC317-A1

3 mm (.1181’’)

20°- 3.19 mm (.1255’’)

30°- 3.8 mm (.1496’’)

45°

025372 ADS318-E1

924962 ADN318-E2

024962 ADP318-E2

024925 SC318-A1

Cutting bits 37.5°

1.4 mm (.0551’’)

30°- 1.62 mm (.0637’’)

37.5°- 1.6 mm (.0629’’)

60°

025362 ADS400-E1

925189 ADN400-E2

025189 ADP400-E2

019509 SC400-A1

2 mm (.0787’’)

30°- 2.31 mm (.0909’’)

37.5°- 1.6 mm (.0629’’)

60°

025363 ADS401-E1

925103 ADN401-E2

025103 ADP401-E2

025216 SC401-A1

1.4 mm (.0551’’)

30°- 1.62 mm (.0637’’)

37.5°

- 1.9 mm (.0748’’)

60°

022952 ADS402-E1

922949 ADN402-E2

022949 ADP402-E2

019183 SC402-A1

2 mm (.0787’’)

30°- 2.31 mm (.0909’’)

37.5°- 2 mm (.0787’’)

60°

022954 ADS403-E1

922951 ADN403-E2

022951 ADP403-E2

024913 SC403-A1

1.4 mm (.0551’’)

18°- 1.47 mm (.0578’’)

37.5°- 2.1 mm (.0826’’)

52°

022956 ADS404-E1

922953 ADN404-E2

022953 ADP404-E2

019186 SC404-A1

export@tendtool.com 0081-13909244118

Cutting bits straight seat angles

15°- 8 mm (.3149’’)

022375 ADS500-E1

921966 ADN500-E2

021966 ADP500-E2

000106 SC500-A1

20°- 9 mm (.3543’’)

022376 ADS501-E1

921967 ADN501-E2

021967 ADP501-E2

025292 SC501-A1

30°- 9 mm (.3543’’)

022378 ADS502-E1

920618 ADN502-E2

020618 ADP502-E2

000593 SC502-A1

45°- 9 mm (.3543’’)

022379 ADS503-E1

920619 ADN503-E2

020619 ADP503-E2

000647 SC503-A1

45.25°- 8 mm (.3149’’)

022388 ADS504-E1

922389 ADN504-E2

022389 ADP504-E2

019153 SC504-A1

60°- 9 mm (.3543’’)

022394 ADS505-E1

922182 ADN505-E2

022182 ADP505-E2

000865 SC505-A1

70°- 16.8 mm (.6614’’)

022397 ADS506-E1

922396 ADN506-E2

022396 ADP506-E2

019154 SC506-B1

75°- 8.3 mm (.3267’)

022398 ADS507-E1

922185 ADN507-E2

022185 ADP507-E2

000872 SC507-A1

75°- 16.4 mm (.6456’’)

025250 ADS508-E1

922408 ADN508-E3

022408 ADP508-E3

013377 SC508-B1

Cutting bits straight seat angles

80°- 12.1 mm (.4763’’)

022411 ADS509-E1

922412 ADN509-E2

022412 ADP509-E2

025217 SC509-B1

82°- 11.5 mm (.4527’’)

022400 ADS510-E1

923370 ADN510-E3

023370 ADP510-E3

025364 SC510-B1

R 0.8 mm (.0314’’)

0°

019584 D1

- -

005168 SC511 (AL11)

R 0.8 mm (.0314’’)

0°

- -

917323 D2

017323 D2

005164 SC512 (AL12)

R 0.5 mm (.0196’’)

0°

- -

927053 ADN513-E2

027053 ADP513-E3

013344 SC513 (L12 OFFSET)

export@tendtool.com 0081-13909244118

Cutting bits performance seat angles

2.52 mm (.0992’’)

R2.5 mm (.0984’’)

38°- 2.4 mm (.0944’’)

45°- 1 mm (.0393’’)

60°

025448 ADS600-E1

924189 ADN600-E2

024189 ADP600-E2

013338 SC600-B1

1.49 mm (.0586’’)

R1 mm (.0393’’)

35°- 1.3 mm (.0511’’)

45°- 1 mm (.0393’’)

60°- 2.5 mm (.0984’’)

75°

025459 ADS601-E1

924190 ADN601-E2

024190 ADP601-E2

013342 SC601-B1

2.06 mm (.0811’’)

R1 mm (.0393’’)

35°- 2 mm (.0787’’)

45°- 1.3 mm (.0511’’)

56°

025460 ADS602-E1

924191 ADN602-E2

024191 ADP602-E2

013337 SC602-B1

R12 mm (.4724’’)

45°- 6 mm (.2362’’)

- -

927058 ADN603-E2

027058 ADP603-E3

013343 SC603-B1

2.9 mm (.1141’’)

R2 mm (.0787’’)

35°- 2.5 mm (.0984’’)

45°- 1.3 mm (.0511’’)

60°- 1.7 mm (.0669’’)

75°- 2.2 mm (.0866’’)

82°

- -

925463 ADN604-E2

025463 ADP604-E2

013924 SC604-B1

2.1 mm (.0826’’)

35°- 2.56 mm (.1007’’)

45°- 1 mm (.0393’’)

55°- 2.5 mm (.0984’’)

65°- 2.5 mm (.0984’’)

75°

- -

925487 ADN605-E2

025487 ADP605-E2

013332 SC605-B2

1.92 mm (.0755’’)

40°- 2.5 mm (.0984’’)

45°- 1.3 mm (.0511’’)

55°- 2.5 mm (.0984’’)

65°- 2.5 mm (.0984’’)

75°

- -

927021 ADN606-E2

027021 ADP606-E2

001318 SC606-B1

1.86 mm (.0732’’)

R1.5 mm (.0590’’)

35°- 1.5 mm (.0590’’)

45°- 1.5 mm (.

0590

’’)

R12 mm (.4724’’)

75°- 3 mm (.1181’’)

R3.5 mm (.1377’’)

45°

026069 ADS607-E1

921301 ADN607-E2

021301 ADP607-E2

013327 SC607-B1

1.9 mm (.0748’’)

R1.5 mm (.0590’’)

35°- 1.54 mm (.0606’’)

45°- 1 mm (.

0393

’’)

R12 mm (.4724’’)

75°- 3 mm (.1181’’)

R3.5 mm (.1377’’)

45°

026070 ADS608-E1

921302 ADN608-E2

021302 ADP608-E2

019205 SC608-B1

Cutting bits performance seat angles

1.9 mm (.0748’’)

R1.5 mm (.0590’’)

35°- 1.54 mm (.0606’’)

45°- 2.5 mm (.

098

’’)

R12 mm (.4724’’)

75°- 3 mm (.1181’’)

R3.5 mm (.1377’’)

45°

- -

925489 ADN609-E2

025489 ADP609-E2

025219 SC609-B1

1.86 mm (.0732’’)

R1.5 mm (.0590’’)

35°- 1.5 mm (.0590’’)

45°- 1.5 mm (.

059

’’)

R12 mm (.4724’’)

85°- 3 mm (.1181’’)

75°

- -

927023 ADN610-E3

027023 ADP610-E3

013923 SC610-B1

2.2 mm (.0866’’)

R1.5 mm (.0590’’)

15°- 0.41 mm (.0161’’)

30°- 0.8 mm (.

0314

’’)

45°- 0.8 mm (.0314’’)

60°- 0.8 mm (.0314’’)

75°

022270 ADS611-E1

927075 ADN611-E2

027075 ADP611-E2

013925 SC611-A1

1.23 mm (.0484’’)

R1.2 mm (.0472’’)

25°- 0.6 mm (.0236’’)

45°- 0.8 mm (.0314’’)

65°- 0.6 mm (.

0236

’’)

75°

- 3.8 mm (.149’’)

45°

026284 ADS612-E1

925464 ADN612-E2

025464 ADP612-E2

024938 SC612-A1

1.86 mm (.0732’’)

R 2 mm (.0787’’)

30°- 1 mm (.0393’’)

45°- 0.8 mm (.0314’’)

60°- 0.6 mm (.

0236

’’)

R 7 mm (.2755’’)

022272 ADS613-E1

925465 ADN613-E2

025465 ADP613-E2

009806 SC613-A1

R 4 mm (.1574’’)

15°- 5.5mm (.2165’’)

022439 ADS614-E1

922440 ADN614-E2

022440 ADP614-E2

012835 SC614-A1

R 4 mm (.1574’’)

30°- 5.7mm (.2244’’)

022450 ADS615-E1

922482 ADN615-E2

022482 ADP615-E2

019157 SC615-A1

R 5 mm (.1968’’)

15°- 5 mm (.1968’’)

025365 ADS616-E1

925366 ADN616-E2

027113 ADP616-E2

025200 SC616-A1

R 5 mm (.1968’’)

30°- 6 mm (.2362’’)

022483 ADS617-E1

922484 ADN617-E2

022484 ADP617-E2

019158 SC617-A1

export@tendtool.com 0081-13909244118

Cutting bits performance seat angles

R 7 mm (.2755’’)

15°- 4.1 mm (.1614’’)

022437 ADS618-E1

922438 ADN618-E2

022438 ADP618-E2

019155 SC618-A1

R 7 mm (.2755’’)

30°- 4.4 mm (.1732’’)

022447 ADS619-E1

922449 ADN619-E2

022449 ADP619-E2

019156 SC619-A1

R 7 mm (.2755’’)

15°- 6.4 mm (.2519’’)

- -

922442 ADN620-E3

022442 ADP620-E3

013328 SC620-B1

75°- 12 mm (.4724’)

R 7 mm (.2755’’)

026283 ADS621-E1

922499 ADN621-E3

022499 ADP621-E3

009225 SC621-B1

80°- 9 mm (.3543’)

R 7 mm (.2755’’)

025080 ADS622-E1

922522 ADN622-E3

022522 ADP622-E3

013926 SC622-B1

1.26 mm (.0496’’)

R 0.8 mm (.0314’’)

30°- 1 mm (.0393’’)

45°- 1 mm (.0

393

’’)

60°- 1 mm (.

0393

’’)

R 13 mm (.5118’’)

R 1.5 mm (.0590’’)

025001 ADS623-E1

923369 ADN623-E2

023369 ADP623-E2

012834 SC623-A1

1.31 mm (.0515’’)

R 1 mm (.0393’’)

32°- 1 mm (.0393’’)

45°- 0.8 mm (.0

314

’’)

60°

026282 ADS624-E1

927024 ADN624-E2

027024 ADP624-E2

019523 SC624-A1

1.55 mm (.0610’’)

R 1.5 mm (.0590’’)

32°- 1 mm (.0393’’)

45°- 0.8 mm (.0

314

’’)

60°

026028 ADS625-E1

927012 ADN625-E2

027012 ADP625-E2

025192 SC625-A2

1.61 mm (.0633’’)

R 1.5 mm (.0590’’)

30°- 1 mm (.0393’’)

45°- 1 mm (.0

393

’’)

60°

023049 ADS626-E1

924016 ADN626-E2

024016 ADP626-E2

001260 SC626-A1

Cutting bits performance seat angles

2 mm (.0787’’)

R 1.5 mm (.0590’’)

15°- 1 mm (.0393’’)

45°- 1 mm (.0

393

’’)

75°

025468 ADS627-E1

925469 ADN627-E2

025469 ADP627-E2

014887 SC627-A1

2.08 mm (.0818’’)

R 1.5 mm (.0590’’)

15°- 1 mm (.0393’’)

45°- 1 mm (.0

393

’’)

75°

026031 ADS628-E1

927031 ADN628-E2

027031 ADP628-E2

025220 SC628-A2

1.36 mm (.0535’’)

R 1.5 mm (.0590’’)

38°- 1 mm (.0393’’)

45°- 1.1 mm (.0

433

’’)

60°

025083 ADS629-E1

927128 ADN629-E2

027128 ADP629-E2

024943 SC629-A1

1.36 mm (.054’’)

R 1.5 mm (.0590’’)

38°- 1 mm (.0393’’)

45°- 1.1 mm (.0

’’)

60°

026257 ADS630-E1

927118 ADN630-E2

027118 ADP630-E2

024901 SC630-A2

1.6 mm (.0629’’)

R 1.5 mm (.0590’’)

30°- 1 mm (.0393’’)

45°- 1.3 mm (.0

511

’’)

60°

025089 ADS631-E1

925471 ADN631-E2

025471 ADP631-E2

025490 SC631-A1

1.6 mm (.0629’’)

R 1.5 mm (.0590’’)

30°- 1 mm (.0393’’)

45°- 1.3 mm (.0

511

’’)

60°

025420 ADS632-E1

925473 ADN632-E2

025473 ADP632-E2

021857 SC632-A2

1.6 mm (.0629’’)

R 1.5 mm (.0590’’)

32°- 1 mm (.0393’’)

45°- 1 mm (.0

393

’’)

60°

026258 ADS633-E1

927064 ADN633-E2

027064 ADP633-E2

025474 SC633-A1

1.6 mm (.0629’’)

R 1.5 mm (.0590’’)

30°- 1 mm (.0393’’)

45°- 1.5 mm (.0

590

’’)

60°

025476 ADS634-E1

925477 ADN634-E2

025477 ADP634-E2

009474 SC634-A1

1.6 mm (.0629’’)

R 1.5 mm (.0590’’)

30°- 1 mm (.0393’’)

45°- 1.5 mm (.0

590

’’)

60°

025184 ADS635-E1

925478 ADN635-E2

025478 ADP635-E2

021859 SC635-A2

export@tendtool.com 0081-13909244118

Cutting bits performance seat angles

1.55 mm (.061’’)

R 1.5 mm (.0590’’)

32°- 1 mm (.0393’’)

45°- 1 mm (.0

393

’’)

60°

026194 ADS637-E1

927106 ADN637-E2

027106 ADP637-E2

024615 SC637-A2

1.6 mm (.0629’’)

R 1.5 mm (.0590’’)

30°- 1 mm (.0393’’)

45°- 1 mm (.0

393

’’)

75°

025479 ADS638-E1

925249 ADN638-E2

025249 ADP638-E2

021860 SC638-A1

1.6 mm (.0629’’)

R 1.5 mm (.0590’’)

30°- 1 mm (.0393’’)

45°- 1 mm (.0

393

’’)

75°

025480 ADS639-E1

927089 ADN639-E2

027089 ADP639-E2

021858 SC639-A2

1.6 mm (.0629’’)

R 1.5 mm (.0590’’)

30°- 1 mm (.0393’’)

45°- 1 mm (.0

393

’’)

75°

025481 ADS640-E1

927025 ADN640-E2

027025 ADP640-E2

025081 SC640-A1

1.6 mm (.0629’’)

R 1.5 mm (.0590’’)

32°- 1 mm (.0393’’)

45°- 1.2 mm (.0

472

’’)

60°

026032 ADS641-E1

927033 ADN641-E2

027033 ADP641-E2

021861 SC641-A2

1.9 mm (.0748’’)

R 1.5 mm (.0590’’)

20°- 1 mm (.0393’’)

45°- 1 mm (.0

393

’’)

60°

025483 ADS642-E1

927076 ADN642-E2

027076 ADP642-E2

028015 SC642-A1

1.9 mm (.075’’)

R 1.5 mm (.0590’’)

20°- 1 mm (.0393’’)

45°- 1 mm (.0

’’)

60°

026033 ADS643-E1

927034 ADN643-E2

027034 ADP643-E2

025221 SC643-A2

2.5 mm (.0984’’)

R 3 mm (.1181’’)

30°- 1.16 mm (.0456’’)

45°- 1.2 mm (.

0472

’’)

R13 mm (.5118’’)

75°- 3 mm (.1181’’)

R 3 mm (.

1181

’’)

- -

927115 ADN644-E2

027115 ADP644-E2

022129 SC644-B1

1.59 mm (.0625’’)

R 2 mm (.0787’’)

37°- 1 mm (.0393’’)

45°- 0.8 mm (.

0314

’’)

52°- 0.6 mm (.0236’’)

R 7 mm (.2755’’)

025000 ADS645-E1

927130 ADN645-E2

027130 ADP645-E2

022130 SC645-A1

Cutting bits performance seat angles

2 mm (.0787’’)

R 2 mm (.0787’’)

35°- 1.41 mm (.0555’’)

45°- 0.9 mm (.

0354

’’)

65°

025493 ADS646-E1

925494 ADN646-E2

025494 ADP646-E2

024986 SC646-B1

1.29 mm (.0507’’)

30.4°- 1.5 mm (.059’’)

45°- 1.5 mm (.

059

’’)

R 10 mm (.3937’’)

- -

925691 ADN647-E2

025691 ADP647-E2

025222 SC647-A1

1.2 mm (.0472’’)

30°- 1.39 mm (.0547’’)

45°- 1 mm (.

0393

’’)

60°

027998 ADS648-E1

927999 ADN648-E2

027999 ADP648-E2

013378 SC648-B4

75°- 5 mm (.1968’’)

R 10 mm (.3937’’)

90°- 3.5 mm (.1377’’)

R 2.5 mm (.0984’’)

45°- 4.32 mm (.

’’)

- -

924192 ADN649-E3

024192 ADP649-E3

023437 SC649-B3

2 mm (.0787’’)

R 1.5 mm (.059’’)

48°- 2.42 mm (.095’’)

50°- 1.1 mm (.

043

’’)

65°- 1.5 mm (.

059

’’)

75°

- -

035013 SC650-B1

1.73 mm (.068’’)

R 1 mm (.039’’)

45°- 2.03 mm (.08’’)

50°- 1.27 mm (.

’’)

65°

- 3.82 mm (.15’’)

75°- 1.91 mm (.075’’)

85°- 3.18mm (.125’’)

87°

- -

035014 SC651-B1

export@tendtool.com 0081-13909244118

Cutting bits sale

0.44 mm (.0173’)

15°- 0.46 mm (.0181’’)

40°- 1.85 mm (.0

728

’’)

55°- 2.69 mm (.1059’’)

70°

032228-E1

0.5 mm (.0196’’)

15°- 0.52 mm (.0204’’)

37.5°- 2.18 mm (.0

858

’’)

50°- 1.33 mm (.0523’’)

70°

031233-E1

0.49 mm (.0196’’)

15°- 0.51 mm (.0204’’)

40°- 1.86 mm (.0

’’)

55°- 1.18 mm (.046’’)

72°

031234 - E1

0.5 mm (.0196’’)

15°- 0.52 mm (.0204’’)

37°- 1.86 mm (.0

732

’’)

55°- 1.18 mm (.0464’’)

72°

030107-A1

0.5 mm (.0196’’)

15°- 0.52 mm (.0204’’)

29°- 2.18 mm (.0

858

’’)

50°- 1.34 mm (.0527’’)

60°

030109-A1

1.8 mm (.0708’’)

25°- 1.99 mm (.0783’’)

45.25°- 2.6 mm (.1023’’)

52°

024905-A1

1.8 mm (.0708’’)

R 0.8 - (.0314’’)

30°- 1.62 mm (.0637’’)

37.5°- 2 mm (.0

787

’’)

60°

927110-E2

1.8 mm (.0708’’)

R 0.8 - (.0314’’)

15°- 1.25 mm (.0492’’)

30°- 2 mm (.0

787

’’)

60°

927111-E2

1.8 mm (.0708’’)

11°- 1.83 mm (.072’’)

31°- 1.5 mm (.0

590

’’)

60°

928744 -E2

026135 Collet set with wrenches

014903 32 CHO Collet Holder 028478 11 /32’’ Collet Set

CC-M1240 Collet Wrench 1-1/4 028479 3/8’’ Collet Set

CC-M1248 Collet Wrench 1-1/2 028480 7 /16’’ Collet Set

028473 1/16’’ Collet Set 028481 1/2’’ Collet Set

028474 1/8’’ Collet Set 028482 9/16’’ Collet Set

028475 3/16’’ Collet Set 028483 5/8’’ Collet Set

028476 1/4’’ Collet Set 028484 11 /16’’ Collet Set

028477 5/16’’ Collet Set 028485 3/4’’ Collet Set

Adapt any industrial tooling to the SERDI machines for more job variety

while keeping the precision!

CDR Core Drill Reamers

5/16’’x1/2 Core Drill Reamer 9/16’’x3/8’’ Core Drill Reamer

026097 7/16’’x5/16’’ Core Drill Reamer 5/8’’x1/2’’ Core Drill Reamer

026098 1/2’’x11/32’’ Core Drill Reamer 5/8’’x7/16’’ Core Drill Reamer

026099 1/2’’x3/8’’ Core Drill Reamer .275’’x7/16’’ Cummins 24 V engine

9/16’’x11/32’’ Core Drill Reamer .275’’ x 1/2’’ Core Drill Reamer

Combination of a core drill and a reamer to save time and money as it

reduces the number of tools you need!

Kit 177

Guide Installation with collet set

026097 Combination Core drill-reamer (7/16» X 5/16») 026142 Guide pilot (5/16»)

026098 Combination Core drill-reamer (1/2» X 11/32») 026143 Guide pilot (11/32»)

026099 Combination Core drill-reamer (1/2» X 3/8») 026144 Guide pilot (3/8»)

026136 Air hammer 014056 Allen screwdriver 1.5mm

026139 Spot facer pilot (5/16"'')

026140 Spot facer pilot ( 11 /32»)

026141 Spot facer pilot (3/8»)

Kit 177 Guide Installation without collet set

026137 Guide top cutter spot facer pilots with cone morse #2 (To be added to the kit if

you do not have a collet set )

404115 Morse adapter (To be added to the kit)

Install ANY guide diameters on your cylinder head! Includes different core drill-reamer sizes to

t your cylinder head specications.

Kit 178 Seat Inserts Installation

014992 Seat body driver 014993 6mm pilot for seat driver (.2335 - .2345)

014999 Seat driver 1.040’’ x .980’’ 014995 7mm pilot for seat driver (.2735 - .2745)

015000 Seat driver 1’’ 1/8 X 1’’ 1/4 200192 7.9mm pilot for seat driver (.3100- .311 0)

015001 Seat driver 1’’ 3/8 X 1’’ 1/2 014996 8mm pilot for seat driver (.3125 - .3135)

015002 Seat driver 1’’ 5/8 X 1’’ 3/4 200193 8. 73mm pilot for seat driver (.341 0- .3420)

015003 Seat driver 1’’ 7/8 X 2’’ 200194 9.52mm pilot for seat driver (.3710- .3720)

015004 Seat driver 2’’ 1/8 X 2’’ 1/4

Install most seat diameters on your cylinder head FASTER. Includes different

pilot and seat driver sizes to fit your cylinder hea specications. With this

kit, Chrome or Nickel inserts can be installed.

Installation / removal of seat and guides

export@tendtool.com 0081-13909244118

Standard Milling Heads

22-C4125 Ø 1- 1/4’’ indexable milling head 22-C4193 Ø 1 - 15/16’’ indexable milling head

22-C4131 Ø 1 - 5/16’’ indexable milling head 22-C4200 Ø 2’’ indexable milling head

22-C4137 Ø 1 - 3/8’’ indexable milling head 22-C4206 Ø 2 - 1/16’’ indexable milling head

22-C4143 Ø 1 - 7/16’’ indexable milling head 22-C4212 Ø 2 - 1/8’’ indexable milling head

22-C4150 Ø 1 - 1/2’’ indexable milling head 22-C4218 Ø 2 - 3/16’’ indexable milling head

22-C4156 Ø 1 - 9/16’’ indexable milling head

22-C4225 Ø 2 - 1/4’’ indexable milling head

22-C4162 Ø 1 - 5/8’’ indexable milling head 22-C4231 Ø 2 - 5/16’’ indexable milling head

22-C4168 Ø 1 - 11/16’’ indexable milling head 22-C4237 Ø 2 - 3/8’’ indexable milling head

22-C4175 Ø 1 - 3/4’’ indexable milling head 22-C4243 Ø 2 - 7/16’’ indexable milling head

22-C4181 Ø 1 - 13/16’’ indexable milling head 22-C4250 Ø 2 - 1/2’’ indexable milling head

22-C4187 Ø 1 - 7/8’’ indexable milling head

Save money now with our

NEW 4 sided Replaceable

Carbide Inserts that yield

four times the life of a single

sided inserts!

Indexable milling heads cutters

Deluxe

Kit 180 - 14 indexable milling heads

22-C4137 1 - 3/8’’ indexable milling head

22-C4143 1 - 7/16’’ indexable milling head

22-C4150 1 - 1/2’’ indexable milling head

22-C4156 1 - 9/16’’ indexable milling head

22-C4162 1 - 5/8’’ indexable milling head

22-C4168 1 - 11/16’’ indexable milling head

22-C4175 1 - 3/4’’ indexable milling head

22-C4181 1 - 13/16’’ indexable milling head

22-C4187 1 - 7/8’’ indexable milling head

22-C4193 1 - 15/16’’ indexable milling head

22-C4200 2’’ indexable milling head

22-C4206 2 - 1/16’’ indexable milling head

22-C4212 2 - 1/8’’ indexable milling head

22-C4218 2 - 3/16’’ indexable milling head

580050 Allen driver 5 mm

001799 Square (.588’’x.588’’x1.56’’)

Standard

Kit 179 - 12 indexable milling heads

22-C4125 Ø 1- 1/4’’ indexable milling head

22-C4131 Ø 1 - 5/16’’ indexable milling head

22-C4137 Ø 1 - 3/8’’ indexable milling head

22-C4143 Ø 1 - 7/16’’ indexable milling head

22-C4150 Ø 1 - 1/2’’ indexable milling head

22-C4156 Ø 1 - 9/16’’ indexable milling head

22-C4162 Ø 1 - 5/8’’ indexable milling head

22-C4168 Ø 1 - 11/16’’ indexable milling head

22-C4175 1 - 3/4’’ indexable milling head

22-C4181 1 - 13/16’’ indexable milling head

22-C4187 1 - 7/8’’ indexable milling head

22-C4193 1 - 15/16’’ indexable milling head

to Ø 60

(increment of 1 mm)

[email protected] 0086-13909244118

Standard Milling Heads

001694 Ø 1’’ brazed milling head 001703 Ø 1 - 3/4’’ brazed milling head

001695 Ø 1 - 1/16’’ brazed milling head 001700 Ø 1 - 13/16’’ brazed milling head

001698 Ø 1 - 1/8’’ brazed milling head 001708 Ø 1 - 7/8’’ brazed milling head

001702 Ø 1 - 3/16’’ brazed milling head 001701 Ø 1 - 15/16’’ brazed milling head

001697 Ø 1 - 1/4’’ brazed milling head 001710 Ø 2’’ brazed milling head

001705 Ø 1 - 5/16’’ brazed milling head 001711 Ø 2 - 1/16’’ brazed milling head

001704 Ø 1 - 3/8’’ brazed milling head 001714 Ø 2 - 1/8’’ brazed milling head

001707 Ø 1 - 7/16’’ brazed milling head 001715 Ø 2 - 3/16’’ brazed milling head

001696 Ø 1 - 1/2’’ brazed milling head 001713 Ø 2 - 1/4’’ brazed milling head

001709 Ø 1 - 9/16’’ brazed milling head 001717 2 Ø - 5/16’’ brazed milling head

001706 Ø 1 - 5/8’’ brazed milling head 001716 Ø 2 - 3/8’’ brazed milling head

001699 Ø 1 - 11/16’’ brazed milling head 001712 Ø 2 - 1/2’’ brazed milling head

Great concentricity and

reduced effort during

machining.

Brazed milling heads cutters

Available as well

in metric sizes:

from Ø20 mm

to Ø 62 mm,

(increment of 1 mm)

Standard

Kit 181 - 8 brazed milling heads

001709 Ø 1 - 9/16’’ brazed milling head

001706 Ø 1 - 5/8’’ brazed milling head

001699 Ø 1 - 11/16’’ brazed milling head

001703 Ø 1 - 3/4’’ brazed milling head

001700 Ø 1 - 13/16’’ brazed milling head

001708 Ø 1 - 7/8’’ brazed milling head

001701 Ø 1 - 15/16’’ brazed milling head

001710 Ø 2’’ brazed milling head

580050 Allen driver 5 mm

001799 Square (.588’’x.588’’x1.56’’)

Deluxe

Kit 182 - 14 brazed milling heads

001704 Ø 1 - 3/8’’ brazed milling head

001707 Ø 1 - 7/16’’ brazed milling head

001696 Ø 1 - 1/2’’ brazed milling head

001709 Ø 1 - 9/16’’ brazed milling head

001706 Ø 1 - 5/8’’ brazed milling head

001699 Ø 1 - 11/16’’ brazed milling head

001703 Ø 1 - 3/4’’ brazed milling head

001700 Ø 1 - 13/16’’ brazed milling head

001708 Ø 1 - 7/8’’ brazed milling head

001701 Ø 1 - 15/16’’ brazed milling head

001710 Ø 2’’ brazed milling head

001711 Ø 2 - 1/16’’ brazed milling head

001714 Ø 2 - 1/8’’ brazed milling head

001715 Ø 2 - 3/16’’ brazed milling head

580050 Allen driver 5 mm

001799 Square (.588’’x.588’’x1.56’’)

[email protected] 008-13909244118

Pilots are made of Tungsten Carbide to offer durability and allow the best machining

quality and precision

in the market! Guaranteed unmatched centering accuracy.

100% compatible with all competitors’ machines.

- Standard Overall Length: 7.480’’ /190mm for any type of guides.

- Optional Overall Length: 8.858’’ /225mm, 9.843» /250mm, 11.811» /300mm.

- Standard Shank Diameter: 0.375’’ /9.52mm for any type of guides.

- Optional Shank Diameter: 0.787’’ /20 mm for a better rigidity in large guides.

For any special pilots order, please contact SERDI Sales Department at 1 800 447 3790.

12 Domestic

Automotive Pilots Kit

12 Import

Automotive Pilots Kit:

8 Diesel Pilots Kit: 17 Japanese

Motorcycle Pilots Kit:

11 Harley-Davidson

Pilots Kit:

0.3106’’·(7.89mm) 0.2157’’ (5.48mm) 0.2496’’ (6.34mm) 0.1571’’ (3.99mm) 0.3106’’ (7.89mm)

0.3114’’ (7.91mm) 0.2165’’ (5.50mm) 0.2504" (6.36mm) 0.1575’’ (4.00mm) 0.3110’’ (7.90mm)

0.3122’’ (7.93mm) 0.2591’’ (6.58mm) 0.4362’’ (11.08mm) 0.1768’’ (4.49mm) 0.3118’’ (7.92mm)

0.3169’’ (8.05mm) 0.2598’’ (6.60mm) 0.4370’’ (11.10mm) 0.1772’’ (4.50mm) 0.3413’’ (8.67mm)

0.3173’’ (8.06mm) 0.2748’’ (6.98mm) 0.4516’’ (11.47mm) 0.1965’’ (4.99mm) 0.3421’’ (8.69mm)

0.3421’’ (8.69mm) 0.2756’’ (7.00mm) 0.4524’’ (11.49mm) 0.1969’’ (5.00mm) 0.3429’’ (8.71mm)

0.3425’’ (8.70mm) 0.3142’’ (7.98mm) 0.4992’’ (12.68mm) 0.2157’’ (5.48mm) 0.3760’’ (9.55mm)

0.3429’’ (8.71mm) 0.3150’’ (8.00mm) 0.5000’’ (12.70mm) 0.2161’’ (5.49mm) 0.3768’’ (9.57mm)

0.3720’’ (9.45mm) 0.3154’’ (8.01 mm) 0.2165’’ (5.50mm) 0.3776’’ (9.59mm)

0.3728’’ (9.47mm) 0.3161’’ (8.03mm) 0.2358’’ (5.99mm) 0.3783’’ (9.61mm)

0.3736’’ (9.49mm) 0.3535’’ (8.98mm) 0.2362’’ (6.00mm) 0.3791’’ (9.63mm)

0.3744’’ (9.51mm) 0.3543’’ (9.00mm) 0.2594’’ (6.59mm)

0.2598’’ (6.60mm)

0.2752’’ (6.99mm)

0.2756’’ (7.00mm)

0.3146’’ (7.99mm)

0.3150’’ (8.00mm)

*not applicable with any other offer

Carbide pilots

[email protected] 0086-13909244118

Carbide pilots chart

• stock • non-stock

mm inch mm inch mm inch mm inch mm inch mm inch mm inch mm inch mm inch mm inch

3.50 0.1378 4.41 0.1737 4.98 0.1961 5.55 0.2185 6.12 0.2410 6.69 0.2634 7.80 0.3071 8.68 0.3417 9.84 0.3874 ... ...

3.51 0.1382 4.42 0.1741 4.99 0.1965 5.56 0.2189 6.13 0.2413 6.70 0.2638 7.81 0.3075 8.69 0.3421 9.85 0.3878 12.60 0.4961

3.52 0.1386 4.43 0.1745 5.00 0.1969 5.57 0.2193 6.14 0.2417 6.71 0.2642 7.82 0.3079 8.70 0.3425 9.86 0.3882 12.61 0.4965

3.53 0.1390 4.44 0.1748 5.01 0.1972 5.58 0.2197 6.15 0.2421 6.72 0.2646 7.83 0.3083 8.71 0.3429 9.87 0.3886 12.62 0.4969

3.54 0.1394 4.45 0.1752 5.02 0.1976 5.59 0.2201 6.16 0.2425 6.73 0.2650 7.84 0.3087 8.72 0.3433 9.88 0.3890 12.63 0.4972

3.55 0.1398 4.46 0.1756 5.03 0.1980 5.60 0.2205 6.17 0.2429 6.74 0.2654 7.85 0.3091 8.73 0.3437 9.89 0.3894 12.64 0.4976

3.56 0.1402 4.47 0.1760 5.04 0.1984 5.61 0.2209 6.18 0.2433 6.75 0.2658 7.86 0.3095 8.74 0.3441 9.90 0.3898 12.65 0.4980

3.57 0.1406 4.48 0.1764 5.05 0.1988 5.62 0.2213 6.19 0.2437 6.76 0.2662 7.87 0.3099 8.75 0.3445 9.91 0.3902 12.66 0.4984

3.58 0.1409 4.49 0.1768 5.06 0.1992 5.63 0.2217 6.20 0.2441 6.77 0.2666 7.88 0.3103 8.76 0.3449 9.92 0.3906 12.67 0.4988

3.59 0.1413 4.50 0.1772 5.07 0.1996 5.64 0.2221 6.21 0.2445 6.78 0.2669 7.89 0.3107 8.77 0.3453 9.93 0.3909 12.68 0.4992

3.60 0.1417 4.51 0.1776 5.08 0.2000 5.65 0.2225 6.22 0.2449 6.79 0.2673 7.90 0.3111 8.78 0.3457 9.94 0.3913 12.69 0.4996

... ... 4.52 0.1780 5.09 0.2004 5.66 0.2228 6.23 0.2453 6.80 0.2677 7.905 0.3112 8.79 0.3461 9.95 0.3917 12.70 0.5000

3.96 0.1559 4.53 0.1784 5.10 0.2008 5.67 0.2232 6.24 0.2457 6.81 0.2681 7.91 0.3114 8.80 0.3465 9.96 0.3921 12.71 0.5004

3.97 0.1563 4.54 0.1788 5.11 0.2012 5.68 0.2236 6.25 0.2461 6.82 0.2685 7.915 0.3116 ... ... 9.97 0.3925 12.72 0.5008

3.98 0.1567 4.55 0.1791 5.12 0.2016 5.69 0.2240 6.26 0.2465 6.83 0.2689 7.92 0.3118 8.90 0.3504 9.98 0.3929 12.73 0.5012

3.99 0.1571 4.56 0.1795 5.13 0.2020 5.70 0.2244 6.27 0.2469 6.84 0.2693 7.925 0.3120 8.91 0.3508 9.99 0.3933 12.74 0.5016

4.00 0.1575 4.57 0.1799 5.14 0.2024 5.71 0.2248 6.28 0.2473 6.85 0.2697 7.93 0.3122 8.92 0.3512 10.00 0.3937 12.75 0.5020

4.01 0.1579 4.58 0.1803 5.15 0.2028 5.72 0.2252 6.29 0.2476 6.86 0.2701 7.94 0.3126 8.93 0.3516 10.01 0.3941 12.76 0.5024

4.02 0.1583 4.59 0.1807 5.16 0.2032 5.73 0.2256 6.30 0.2480 6.87 0.2705 7.945 0.3128 8.94 0.3520 10.02 0.3945 12.77

0.5028

4.03 0.1587 4.60 0.1811 5.17

0.2036 5.74 0.2260 6.31 0.2484 6.88 0.2709 7.95 0.3130 8.95 0.3524 10.03 0.3949 12.78 0.5031

4.04 0.1591 4.61 0.1815 5.18 0.2040 5.75 0.2264 6.32 0.2488 6.89 0.2713 7.96 0.3135 8.96 0.3528 10.04 0.3953 12.79 0.5035

4.05 0.1595 4.62 0.1819 5.19 0.2044 5.76 0.2268 6.33 0.2492 6.90 0.2717 7.97 0.3139 8.97 0.3531 10.05 0.3957 12.80 0.5039

4.06 0.1599 4.63 0.1823 5.20 0.2047 5.77 0.2272 6.34 0.2496 6.91 0.2721 7.98 0.3143 8.98 0.3535 10.06 0.3961 ... ...

4.07 0.1602 4.64 0.1827 5.21 0.2051 5.78 0.2276 6.35 0.2500 6.92 0.2724 7.99 0.3147 8.99 0.3539 10.07 0.3965 13.00 0.5118

4.08 0.1606 4.65 0.1831 5.22 0.2055 5.79 0.2280 6.36 0.2504 6.93 0.2728 8.00 0.3151 9.00 0.3543 10.08 0.3969 13.01 0.5122

4.09 0.1610 4.66 0.1835 5.23 0.2059 5.80 0.2284 6.37 0.2508 6.94 0.2732 8.01 0.3155 9.01 0.3547 10.09 0.3972 13.02 0.5126

4.10 0.1614 4.67 0.1839 5.24 0.2063 5.81 0.2288 6.38 0.2512 6.95 0.2736 8.02 0.3159 9.02 0.3551 10.10 0.3976 ... ...

4.11 0.1618 4.68 0.1843 5.25 0.2067 5.82 0.2291 6.39 0.2516 6.96 0.2740 8.03 0.3161 9.03 0.3555 ... ... 13.50 0.5315

4.12 0.1622 4.69 0.1847 5.26 0.2071 5.83 0.2295 6.40 0.2519 6.97 0.2744 8.04 0.3166 9.04 0.3559 11.00 0.4331 13.51 0.5319

4.13 0.1626 4.70 0.1851 5.27 0.2075 5.84 0.2299 6.41 0.2524 6.98 0.2748 8.05 0.3169 9.05 0.3563 11.01 0.4335 13.52 0.5327

4.14 0.1630 4.71 0.1855 5.28 0.2079 5.85 0.2303 6.42 0.2528 6.99 0.2752 8.06 0.3173 9.06 0.3567 11.02 0.4339 ... ...

4.15 0.1634 4.72 0.1858 5.29 0.2083 5.86 0.2307 6.43 0.2532 7.00 0.2756 8.07 0.3177 9.07 0.3571 11.03 0.4343 14.00 0.5512

4.16 0.1638 4.73 0.1862 5.30 0.2087 5.87 0.2311 6.44 0.2536 6.985 0.2750 8.08 0.3181 9.08 0.3575 11.04 0.4346 14.01 0.5516

4.17 0.1642 4.74 0.1866 5.31 0.2091 5.88 0.2315 6.45 0.2540 6.99 0.2752 8.09 0.3185 9.09 0.3579 11.05 0.4350 14.02 0.5520

4.18 0.1646 4.75 0.1870 5.32 0.2095 5.89 0.2319 6.46 0.2543 7.00 0.2756 8.10 0.3189 9.10 0.3583 11.06 0.4354 ... ...

4.19 0.1650 4.76 0.1874 5.33 0.2099 5.90 0.2323 6.47 0.2547 7.005 0.2758 ... ... ... ... 11.07 0.4358 15.00 0.5906

4.20 0.1654 4.77 0.1878 5.34 0.2102 5.91 0.2327 6.48 0.2551 7.01 0.2760 8.30 0.3268 9.40 0.3701 11.08 0.4362 15.01 0.5909

4.21 0.1658 4.78 0.1882 5.35 0.2106 5.92 0.2331 6.49 0.2555 7.02 0.2764 8.31 0.3271 9.41 0.3705 11.09 0.4366 15.02 0.5913

4.22 0.1662 4.79 0.1886 5.36 0.2110 5.93 0.2335 6.50 0.2559 7.03 0.2768 8.32 0.3275 9.42 0.3709 11.10 0.4370 ...

...

4.23 0.1666 4.80 0.1890 5.37 0.2114 5.94 0.2339 6.51

0.2563 7.04 0.2772 8.33 0.3279 9.43 0.3713 11.11 0.4374 17.00 0.6693

4.24 0.1670 4.81 0.1894 5.38 0.2118 5.95 0.2343 6.52 0.2567 7.05 0.2776 8.34 0.3283 9.44 0.3717 ... ... 17.01 0.6697

4.25 0.1674 4.82 0.1898 5.39 0.2122 5.96 0.2347 6.53 0.2571 7.06 0.2780 8.35 0.3287 9.45 0.3720 11.45 0.4508 17.02 0.6701

4.26 0.1678 4.83 0.1902 5.40 0.2126 5.97 0.2351 6.54 0.2575 7.07 0.2784 8.36 0.3291 9.46 0.3724 11.46 0.4512 ... ...

4.27 0.1682 4.84 0.1906 5.41 0.2130 5.98 0.2355 6.55 0.2579 7.08 0.2788 8.37 0.3295 9.47 0.3728 11.47 0.4516 19.00 0.7480

4.28 0.1686 4.85 0.1910 5.42 0.2134 5.99 0.2359 6.56 0.2583 7.09 0.2791 8.38 0.3299 9.48 0.3732 11.48 0.4520 19.01 0.7484

4.29 0.1690 4.86 0.1914 5.43 0.2138 6.00 0.2363 6.57 0.2587 7.10 0.2795 8.39 0.3303 9.49 0.3736 11.49 0.4524 19.02 0.7488

4.30 0.1694 4.87 0.1918 5.44 0.2142 6.01 0.2367 6.58 0.2591 7.11 0.2799 8.40 0.3307 9.50 0.3740 11.50 0.4528 ... ...

4.31 0.1697 4.88 0.1921 5.45 0.2146 6.02 0.2371 6.59 0.2594 7.12 0.2803 ... ... 9.51 0.3744 11.51 0.4531 22.00 0.8661

4.32 0.1701 4.89 0.1925 5.46 0.2150 6.03 0.2375 6.60 0.2598 7.13 0.2807 8.60 0.3386 9.52 0.3748 11.52 0.4535 22.01 0.8665

4.33 0.1705 4.90 0.1929 5.47 0.2154 6.04 0.2379 6.61 0.2602 7.14 0.2811 8.61 0.3390 9.53 0.3752 11.53 0.4539 22.02 0.8669

4.34 0.1709 4.91 0.1933 5.48 0.2157 6.05 0.2383 6.62 0.2606 7.15 0.2815 8.62 0.3394 9.54 0.3756 11.54 0.4543 ... ...

4.35 0.1713 4.92 0.1937 5.49 0.2161 6.06 0.2387 6.63 0.2610 7.16 0.2819 8.63 0.3398 9.55 0.3760 11.55 0.4547 24.00 0.9449

4.36 0.1717 4.93 0.1941 5.50 0.2165 6.07 0.2340 6.64 0.2614 7.17 0.2823 8.64 0.3402 ... ... 11.56 0.4551 24.01 0.9453

4.37 0.1721 4.94 0.1945 5.51 0.2169 6.08 0.2394 6.65 0.2319 7.18 0.2827 8.65 0.3406 9.80 0.3858 11.57 0.4555 24.02 0.9457

4.38 0.1725 4.95 0.1949 5.52 0.2173 6.09 0.2398 6.66 0.2622 7.19 0.2831 8.66 0.3409 9.81 0.3862 11.58 0.4559 ... ...

4.39 0.1729 4.96 0.1953 5.53 0.2177 6.10 0.2402 6.67 0.2626 7.20 0.2835 8.67 0.3413 9.82 0.3866 11.59 0.4563 25.00 0.9843

4.40 0.1733 4.97 0.1957 5.54 0.2181 6.11 0.2406 6.68 0.2630 ... ... 8.68 0.3417 9.83 0.3870 11.60 0.4567

[email protected] 008-13909244118

press range

- Hydraulic valve guide press

- Remove used valve guides

from the cylinder head

- Assemble or disassemble

valve springs

- Insert new seats

- Reduces operator fatigue

and costly operator errors

- Tilting xture

work bench range

- Heavy duty pneumatic

cylinder head work bench

- Assemble or disassemble

valve springs on cylinder

head of cars, trucks and

motorcycles.

- Tilting xture

Machine range

automatic single point valve seat/guide machining

- For mass production of medium size

cylinder heads

- CNC driven

- Automatic spindle speed, spindle feed

(Z axis) and carriage feed (U axis)

- Automatic stroke on X and Y axis

optional to machine each valve guide of

one or several heads (assuming they own

the same guide diameter).

- Spindle centering through triple air

cushion, live pilot technology

- Standard size frame

- For mass production of medium and

large size cylinder heads

- CNC driven

- Automatic spindle speed, spindle feed

(Z axis) and carriage feed (U axis)

- Automatic stroke on X and Y axis

optional to machine each valve guide of

one or several heads (assuming they own

the same guide diameter).

- Spindle centering through triple air

cushion, live pilot technology

- XL size frame

[email protected] 0086-13909244118

TL120CNC

TL120XL CNC

TGP1200 TWS1100

Machine range

pressure tester range

- Quick and easy clamping system allowing tests at a pressure of 0 to 10 bars

- 360° electric powered roll-over ixture

- Hydraulic cradle lift

- Max head dimensions TPT 1600 :

1250 x 395 x 300 mm

49 x 15.5 x 11.5 in

- Max head dimensions TPT 1600 L: Max head dimensions TPT 1700 XL:

1350 x 425 x 300 mm

53.1 x 16.7 x 11.5 in

manual form tool valve seat/guide machining

- For common automotive and

motorcycle multi-valve cylinder heads

- 80 mm (3.15’’) spindle diameter with

medium torque

- Machining seats from Ø16 to 90 mm

(0.6’’ to 2.36’’)

- Manual stroke on X and Y axis

- Spindle centering through double air

cushion

- Live pilot technology

- Small size frame

- For common automotive and

motorcycle multi-valve cylinder heads

- 80 mm (3.15’’) spindle diameter with

medium torque

- Machining seats from Ø16 to 90 mm

(0.6’’ to 3.6’’)

- Manual stroke on X and Y axis

- Spindle centering through triple air

cushion

- Live pilot technology

- Small size frame

- Highly versatile machine for micro

engine to stationary engine

- 80 mm (3.15’’) spindle diameter with

high torque

- Machining seats from Ø16 to 120 mm

(0.6’’ to 4.72’’)

- Manual stroke on X and Y axis

- Spindle centering through triple air

cushion

- Live pilot technology

- Standard size frame

- Machine for automotive, diesel and stationary engine seat

machining

- 116 mm (4.5’’) spindle diameter with massive torque

- Machining seats from Ø28 to 120 mm (1.1’’ to 4.72’’)

Manual stroke on X and Y axis

- Spindle centering through double air cushion

- Live pilot technology

- Standard size frame

- Machine for diesel, stationary engine, railways or marine

seat machining

- 116 mm (4.5’’) spindle diameter with massive torque

- Machining seats from Ø28 to 120 mm (1.1’’ to 4.72’’)

- Manual stroke on X and Y axis

- Spindle centering through double air cushion

- Live pilot technology

- Large size frame

[email protected] 0086-13909244118

TS60

TX90

TL120

TL120DRO

TL120XL

1350 X460 X410 mm

53.1 x 18.1 x 16.1mm

TPT1600/L/1700XL

accessories range

033763 - Dual axis roll over xture

Max cylinder head

dimensions:

Length: 1050 mm - 41.3’’

Height: 270 mm - 10.7’’

Width: 300 mm - 11.8’’

. Allows quick positionning of parallel and non-parallel side heads,

even with canted valve guides.

. Set the cylinder head at the desired level and roll it over

. Sturdy clamping thanks to two large jaws

. Sphere centering handles to get a quick mount of the head

. Firm locking of the jaw’s shafts through two handles for a

perfect clamping while machining.

. Supplied with a bubble level 024298

033622 - Heavy duty fixture

Max cylinder head

dimensions:

Length: 1050 mm - 41.3’’

Height: 420 mm - 16.5’’

Width: 300 mm - 11.8’’

. Allows quick positionning of parallel and non-parallel side heads

. Sturdy clamping thanks to two large jaws

. 360° rotation to get an easy access to the whole sides of the

cylinder head for various jobs

. Firm locking of the jaw’s shafts through two handles for a perfect

clamping while machining.

. Supplied with a bubble level 024298

[email protected] 0086-13909244118

accessories range

3.0 fixture

Max cylinder head

dimensions:

Length: 1050 mm - 41.3’’

Height: 270 mm - 10.7’’

Width: 300 mm - 11.8’’

. Allows quick positionning of parallel and non-parallel side heads,

even with canted valve guides.

. Set the cylinder head at the desired level and roll it over

. Sturdy clamping thanks to two large jaws

. Sphere centering handles to get a quick mount of the head

. Firm locking of the jaw’s shafts through two handles for a

perfect clamping while machining.

. Supplied with a bubble level

4.0 Fixture

Max cylinder head

dimensions:

Length: 1050 mm - 41.3’’

Height: 270 mm - 10.6’’

Width: 300 mm - 11.8’’

. Allows quick positionning of parallel and non-parallel side heads

. Sturdy clamping thanks to two large jaws

. 360° rotation to get an easy access to the whole sides of the

cylinder head for various jobs

. Firm locking of the jaw’s shafts through two handles for a perfect

clamping while machining.

. Supplied with a bubble level

[email protected] 0086-13909244118

General conditions of sale

All prices are quoted in USD and are enduser’s net prices.

All prices are to be understood : EX-WORKS (EXW incoterms 2010) ANNECY

For any other incoterms, we shall submit our best quotation upon request.

PAYMENT TERMS :

If no specific payment terms have been agreed upon, payment is to be understood as «irrevocable letter of credit»

Our Bank name and address are as follows :

XI`AN TENDTOOL MACHINERY CO.,LTD

ADD:25# NO.181,INDUSTRIAL BUILDING BLOCK A,TAI BAI NAN ROAD ,XI AN, CHINA

BANK INFORMATION (ADVISING BANK):

BANK: CHINA CITIC BANK XI’AN BRANCH

ADD: CITIC MANSION, NO. 89 NORTH CHANG’AN ROAD, XI’AN, CHINA

USD ACCOUNT NO.: 7251311482100000723

SWIFT: CIBKCNBJ710

INSPECTION :

If independent inspection should be required (SGS, BUREAU VERITAS, CALEB BRETT or similar) it will be charged to the importer’s.

GUARANTEE :

TENDTOOL guarantees all parts of its equipment, to the original purchaser, for one full year from date of shipment (except as provided below)

against defects in material or workmanship, when the equipment is installed in strict accordance with its particular specifications. TENDTOOL

MACHINERY will repair and/or replace free of charge (Ex works) all such defective parts, ONLY when returned to the factory in XI'AN CHINA,

with shipping charges PREPAID. This guarantee DOES NOT COVER damage caused by accident, abuse or faulty installation nor repair or

replacement of parts worn or consumed in normal operation of the machine. Additionally, this guarantee does not cover such items as Diamond

Tools, Ball Bearings, Grinding Wheels, Belts, Carbide Tool Bits and other accessory items, except at the discretion of MACHINES SERDI. This

guarantee is at no time construed to mean the entire machine.

CANCELLATION OF ORDER :

Cancellation of order must be in writing and returned to the factory before shipment.

SHORTAGE OR LOST GOODS :

Any claims for shortages or loss must be reported within 10 days from receipt of shipment. Claims for transit loss or damage are the responsibility

of the carrier according to the incoterm required by the importer.

RETURN MERCHANDISE POLICY :

- Merchandise may not be returned to XI`AN TENDTOOL MACHINERY CO.,LTD(TENDTOOL) without written or verbal approval.

- Customer MUST contact the Export Departement to receive authorization.

- Merchandise authorized for return must be returned at customer’s charge along with a copy of the invoice(s) or delivery note.

- Returning the goods DOES NOT guarantee credit.

- Credit for return merchandise is at the sole discretion of MACHINES SERDI.

- Credit if any will be issued ONLY after inspection of returned goods.

PRICES AND TERMS ARE SUBJECT TO CHANGE WITHOUT NOTICE

Valve seat and guide machines

Uncontractual document. TENDTOOL reserves the right to make changes in design, specifications, and descriptions without notice.

.XI’AN Tendtool Machinery Manufacturing Co.,LTD

Tel: +86 29 88396071 / 13909244118

Fax:+86 29 88396333 /

E-MAIL:[email protected]

[email protected]

Add:A1101 Palmary Plaza, No. 4 Fenghuinan Road, Xi’an, China

Applications

Heavy diesel

Tank

Stationary engines

Marine

Motorcycle

Construction truck