Allegro 3
™
Rugged Handheld
Juniper Systems, Inc. Logan, UT, USA
Phone: 435.753.1881
Email: sales@junipersys.com
Juniper Systems Ltd. Bromsgrove, UK
Phone: +44 (0) 1527 870773
Email: infoemea@junipersys.com
www.junipersys.com
GEODE GNS2 COMPATIBILITY
• iPhone 11 Pro Max, iPhone 11 Pro, iPhone
11, iPhone XS, iPhone XS Max, iPhone XR,
iPhone X, iPhone 8, iPhone 8 Plus, iPhone
7, iPhone 7 Plus, iPhone SE, iPhone 6s Plus,
iPhone 6s, iPhone 6 Plus, iPhone 6, iPod
Touch (7th Generation), iPad Mini (5th
Generation), iPad (7th Generation), iPad Pro
11-inch, iPad (6th Generation), iPad Pro 10.5
inch, iPad Pro 12.9 inch (1st, 2nd, and 3rd
Generation.)
• Windows
®
PC (8/10)
• Windows
®
Embedded Handheld 6.5
• Android
TM
4.x and above
• GeodeConnect™ software provides
configuration, communications setup, and
receiver settings
RECEIVER
• Receiver Type: GNSS single frequency with
carrier phase tracking
• Signals Received: GPS, SBAS, GLONASS,
BeiDou, GALILEO and QZSS
1
• Channels: 162
• SBAS Tracking: 3-channel parallel tracking
• Update Rate: 1 Hz standard, 2–10 Hz
(optional)
ACCURACY
• SBAS (WAAS): <30 cm Horizontal RMS
(<60 cm 2DRMS)
2
• Cold Start: <60 sec typical (no almanac)
• Reacquisition: <1 sec
COMMUNICATIONS
• Bluetooth
®
4.1 SPP, iAP2, EAP
• Bluetooth Range: Class 1 Long Range
• Ports: Micro USB Client 2.0; Serial RS232C
DB-9 (optional)
• Serial Baud Rates: 4800–115200
RECEIVER PROTOCOLS
• Data I/O Protocol: NMEA 0183, Crescent Raw
Binary (proprietary)
• Correction I/O Protocol: Hemisphere GNSS
Proprietary, ROX, RTCM v2.3, RTCM v3.2,
CMR, CMR+
• Other: 1PPS Timing Output, Speed Pulse,
Event Marker Input (optional)
POWER
• Input Voltage: 5VDC @ 2A USB
• Power Consumption: 1.7–2 W nominal
• Overtime Technology™ Battery: 3.6V 6000
mAh Li-ion (10 hours)
• Charging Time: Less than 4 hours
ANTENNA
• Internal precision Multi-GNSS with
integrated ground plane
• External Antenna Port: MCX type, 50 ohm
15VDC @ 20 mA maximum
JUNIPER RUGGED™
• Operating Temp: -20 C to +60 C
• Storage Temp: -30 C to +60 C
• Meets or Exceeds MIL-STD 810G (Drop,
Vibration, Temperature, Ingress Protection)
• Enclosure Rating: IP68
• Dimensions: 4.4 x 4.4 x 1.7 inch
(111 x 111 x 43 mm)
• Weight: 0.8 lb (360 g)
• Mount: ¼ x 20 camera stud and #6-32 AMPS
RECEIVER UPGRADES
• 2 Hz to 10 Hz update rate
• Multi-GNSS upgrade
INCLUDED ACCESSORIES
• 5VDC USB Universal Charger
• USB Data/Charging Cable (USB-A to
Micro-B)
• 5/8 x 11 Pole Mount Adapter
CONFIGURATIONS
• Geode GNS2 GPS, 1 Hz
• Geode GNS2 Multi-GNSS, 1 Hz
• Geode GNS2 Multi-GNSS, with 9-pin
serial port, 1 Hz
• Geode GNS2 Multi-GNSS, 10Hz
• Geode GNS2 Multi-GNSS, 10Hz with
9-pin Port
1. Signals used dependent on model configuration
2. GNSS accuracy subject to observation conditions,
multipath environment, number of satellites in view,
satellite geometry, and ionospheric activity.
CONTACT JUNIPER SYSTEMS TODAY FOR A QUOTE